cool setup! just got mine yesterday and started upgrading right away. i noticed you have the lighter/spatula holder not linked, would like to print it aswell :)
Thanks man! Appreciate it! Enjoy printing! Thanks for noticing, I'll update the description though here is the link as well hehe www.printables.com/model/966273 It doesnt have the lighter holder because I've remixed the file hehe though you can do it in the slicer, i use orca, i just added a cylinder with a hole same size as the lighter and i joined them together through the slicer software. I could make a short video of that, and will update you through that hehe
@@thesealanderboi1697 good to hear that, i planning to buy ender ceramic hot end or TZ E3 ceramic from aliexpress, i read a mixed comments, broken etc..
@@dgm778 well to be honest creality has some design flaws with the ceramic hotend that they had, ive seen the other reviews though it never happened to me, Im not sure why but I'll give an update if ever i had some issues and how to resolve, for now it works for me it increases the max flow rate which is a super pro hehe
Your stock is worsethan mine, heck your upgraded is worse than my repositioned stock fan. You probably have a bad benchy model or you need to tune your profile more, your upgrades are for speed, you can incorporate faster speed while tuning your settings.
Yeah I figured that I need more calibrations and I used the wrong model and filament for the comparison, to be honest I dont really have other old prints to compare it with hahaha! but thanks for the feedback, will try to tune more to incorporate faster speeds thanks for watching! 😁
Well i think i used the wrong filament (matte pink) for the example and its a different gcode, plus the print difference is almost 3 months apart 😅 I'd try to use a better example next time but I'd still look into that, thanks for the feedback btw 😀
Great Video and very nice mods!
Glad you enjoyed it! Will post other videos soon thanks for watching!
Your printer must had a problem, your "original" boat was not good at all, but my original printer, no mods prints exactly as your final benchie boat!
Figured that as well haha keeps on clogging thats why i had to upgrade it haha tho it did a lot better in max flow rate and over hangs hehe
One is dont like too more speed record, blow my mind...
cool setup! just got mine yesterday and started upgrading right away. i noticed you have the lighter/spatula holder not linked, would like to print it aswell :)
Thanks man! Appreciate it! Enjoy printing!
Thanks for noticing, I'll update the description though here is the link as well hehe
www.printables.com/model/966273
It doesnt have the lighter holder because I've remixed the file hehe though you can do it in the slicer, i use orca, i just added a cylinder with a hole same size as the lighter and i joined them together through the slicer software. I could make a short video of that, and will update you through that hehe
hello, you have issues with the ceramic hotend?
@@dgm778 just a minor one, which was resolved with in the time of the recording hehe other than that its immaculate hehe 😅
@@thesealanderboi1697 good to hear that, i planning to buy ender ceramic hot end or TZ E3 ceramic from aliexpress, i read a mixed comments, broken etc..
@@dgm778 well to be honest creality has some design flaws with the ceramic hotend that they had, ive seen the other reviews though it never happened to me, Im not sure why but I'll give an update if ever i had some issues and how to resolve, for now it works for me it increases the max flow rate which is a super pro hehe
@@thesealanderboi1697 thank you for the reply!
@@dgm778 no worries! Glad to help 😀
Your stock is worsethan mine, heck your upgraded is worse than my repositioned stock fan. You probably have a bad benchy model or you need to tune your profile more, your upgrades are for speed, you can incorporate faster speed while tuning your settings.
Yeah I figured that I need more calibrations and I used the wrong model and filament for the comparison, to be honest I dont really have other old prints to compare it with hahaha! but thanks for the feedback, will try to tune more to incorporate faster speeds thanks for watching! 😁
I think you only made it worse. It prints much better in stock.
Well i think i used the wrong filament (matte pink) for the example and its a different gcode, plus the print difference is almost 3 months apart 😅 I'd try to use a better example next time but I'd still look into that, thanks for the feedback btw 😀
Pourquoi infliger cela à ton imprimante.... tant et tant d'opérations pour au final rien de plus hormis une esthétique douteuse
C’est juste l’hobby quelqu’un aime faire 3d models, quelqu’un aime modifier son 3d printer.