wipe lens mold canon 18-55 is
HTML-код
- Опубликовано: 10 апр 2019
- #Lêkiểmcamera #Ốngkính #Máyảnh
wipe lens mold canon 18-55 is
Above is the whole time we clean the lens of 18-55mm is because of the mold and dirty lenses ....
There are not many assistive devices to work with but we have tried to achieve the lens standard, when it is done, everything on the lens is very good, ensuring great definition and coating still intact. Everything is great when there is no dust, mold, dirt on the lens anymore, we think we will get many beautiful photos from here ...
If everyone does this, it will bring a beautiful image ..
Stop here, everyone can share and subscribe to the channel to receive the next video
because of something clean and beautiful.
thank you 
Хобби
muito bom ! Agora posso desmontar a minha lente
Toma cuidado com essas pinças pra não arranhar as lentes.
Wow! very efficient job. You are thorough with the job. well done. Where are you ? How much you charge this cleaning job?
Hi, my 18-55 mm lenses do not have the Automatic Stabilization button and it also shows a 2 lenses pieces tied on the external part, assembled together and show much fungus, do you have any idea of how open these pieces without damage it?
Anh chấm lọ dung dịch gì để lau lens vậy. Cho e xin tên với ạ
😨 I can't do this.
Wrong way of cleaning the image sensor, rubbing like that will scratch the sensor
Anh có lens 18 55 và 55 250 làm hết bn tiền em ơi
How delicate are the ribbon cables? I'm cleaning a lens that's full of fungus, I've taken the rear off and cleaned the dust protector glass at the back (f/4.5.6 with stabilisation) which was filthy, but there's one snowflake of fungus on the rear lens inside. What are you using with the cotton wool?
View glasses clean spay?
@@ruisnts88 Reading my comment and giggling... Time for an edit.
Ok
3:40 Congrats, lens is now decentered and image results will be catastrophic: uneven sharpness, blurring and optical errors all over the place. You can't open the inner cell without recentering it on an optical bench. Anyway, does not really matter since you also took out the eccentric collars for tilt control with no position marks (2:42). Image quality will therefore be even worse. Horrible job, hope this wasn't for a client..
Needs to be properly dried as well
@Levi Hoffman This video is good for showing how to disassemble a lens and thats all Just dont expect it to work correctly if you reassemble it in such a hap hazard and careless way in this video
Don't they always go back together the same way? If not, the arm wouldn't work. It's three mount screws with no adjustment, so it should go back together exactly how it came apart.