the option for the tacan triggered action is no longer availble and the carrier still turns the tacan off do you have any solution because you are the only one on the internet who explained it
9:08 to prevent that, do not set up way points until everything is set 1st. Then make way points, and it will carry over mission plans or goals as well at each point until you change it.
I get no TACCAN ICLS option under Perform Command.. Any thoughts?? Followed everything and mine only has no Action, Run Script, Script File, Invisible and Immortal
So i can't get the trigger system to recognize the AI tasks of "activate tacan" and "activate icls". I followed all the steps to the letter and the task does not appear in the actions list. Is there a new way of doing this as i know that the TACAN bug still exists and i would like to keep them active? Thanks
I just downloaded DCS with CA recently but the ships never listen to my commands set in mission editor (not to mention during the mission) regarding where to go (and starting to stop after a short while), as well as what to fire against to some extend...… planes also have the same problem but way more obedient (though they always start wandering off somewhere at times...) Can you tell me what happened?
I think I missing something... when I set up a carrier to do the TACAN/ICLS setup you describe... the carrier quits following the waypoints and plows straight ahead.
Thanks for the gouge. The one thing I've really struggled with is trying to sort the proper headings in the game. I've had a hard time dialing in the proper BRC and wind over the deck. I'm not sure but I think that the headings the Hornet uses are true and the editor is using magnetic. All I know for sure is this; if I set the heading for the carrier to 000 deg, the real heading I need to fly in the game is about 357 degrees on the Caucasus map. I think that's just about correct MagVar. I know that if feels like there is a crosswind in close, but I don't know if they model the burble in game and that's what I'm feeling. Any additional gouge on the headings?
Its because of the MagVar, it is modelled in the game so you have to take that in to account.... or .... you can just cheat like I do and change the HSI to display TRUE headings instead of MAG headings. On the HSI page select DATA, then Aircraft and on the right hand side in the middle you'll see the option to switch Heading modes from Mag to True. I normally set this up for the CASE 1 and just use the BRC i have from the mission editor, its a bit cheeky, but it works :)
Wow. I learned more than how to set TACAN and ILS. Very complicate with lot of steps I will need to re-visited your interesting video with pleasure Question: How to set the course if the carrier change direction ? Thanks from CYUL
I'm now exclusively streaming on TWITCH folks and will no longer be streaming on RUclips! Head over to the Twitch channel to keep up with all the live action! - www.twitch.tv/104th_Maverick
Dear Mav. let me ask you some questions since I am totally new in that kind of staff (DGS) First of all, this tutorial is in DCS 2.5? Second, Is the aircraft carrier including in the theater that I have to buy or I have to buy it separately? Third, the aircrafts in the carrier (except mine) are they accompany my mission or they are static? Thanx a lot in advance, and sorry for a lot of questions
Hello friend, Yes the turorial is for 2.5 but it will work in any version. Yes the aircraft carrier is included with the DCS version. The aircraft on the carrier are static objects just for show sir.
Hi Maverick. I've followed you tutorial ok but I'm failing on the next step! How do you set client spawning slots on the carrier that don't snap back to the centre of the flight deck?
@@104thMaverick I only have the option "Take off from parking hot" but that still snaps back to the middle of the flight deck. Confused! (PS. AKA Specter in DCS)
SweeTtaterpie 3.14 ED did talk years ago about making ships work with the Combined Arms module, users would be able to control ships and fire weapons etc, I’d certainly love to try something like that!
Back in 80s, had the first Microsoft flight simulator on an IBM clone with floppy disks, also a friend up in Canada designed a carrier land game called Jet, it was set up sort of wire frame graphics, I think it's possible for ship simulators to finally merge with aircraft lol.
They really should have made it a little more simple to have the carrier conduct such a simple task. Why would you have a carrier and it not outputting TCN ICLS.
Hi there guys! I'm fairly new to the dcs world life and i'm having troubles setting up spawns on the carrier. Can someone point me in the right direction on how to do this please? I tried generating a scenario and adding the carriers, then using my own methods to get a potential spawn point but i was greeted with a never ending "wait" message :(
Hi Andy, I know this isn't ideal but until the new carrier DLC is available the best way to have people spawn on the boat is spawning them directly on to the catapults by selecting 'Takeoff from Runway' in the starting option. Once the new DLC is out we should have a lot more options for where people spawn.
the option for the tacan triggered action is no longer availble and the carrier still turns the tacan off do you have any solution because you are the only one on the internet who explained it
Got you bro! ruclips.net/video/D24tNujMLV0/видео.html
@@104thMaverick done it thank you bro much appreciated
Nice!
Helpful vid!
And It's OK to call it ILS on the boat. ;)
We all called it that. I rarely heard anyone call it ICLS, at least when I was in.
9:08 to prevent that, do not set up way points until everything is set 1st. Then make way points, and it will carry over mission plans or goals as well at each point until you change it.
There is no Active ICLS in my Perform Command drop down...
I'm on the floor laughing, the Jurassic Park music in the background is epic, so subtle. hahaha.
Great video! Thanks!
I get no TACCAN ICLS option under Perform Command.. Any thoughts?? Followed everything and mine only has no Action, Run Script, Script File, Invisible and Immortal
how do you add ils to runways
Thanks for this video man. Very helpful and excellent presentation. Subscribed!
How do I put jets on my ship? it doesn't seem to be manned, even when i zoom it is transparent as if it were a target. (I don't have dlc)
So i can't get the trigger system to recognize the AI tasks of "activate tacan" and "activate icls". I followed all the steps to the letter and the task does not appear in the actions list. Is there a new way of doing this as i know that the TACAN bug still exists and i would like to keep them active? Thanks
Activate ICLS isn’t an option under preform command for me?
the aircraft module wont show when i zoom in to place planes
How do I pick up the ils beams during the flight? Sorry I’m pretty new to dcs
Hi depends on your Aircraft. The F/A-18 has some options in the HSI. Check some tutorials, they will explain it in detail.
i'm getting issues where the carrier when I comes in doesn't allow me permission, any ideas why?
I need help, everytime i click the button to add the plane, the game crashes, any fix or help?
Thanks Maverick, very informative and brilliant attention to details as always.
Looking forward to seeing more DCS Mission Editor Tutorials like this.
HI Maverick
, could you tell me what's the background music at 24:00. It's sounds so familiar but cannot remember that.
The Jurassic Park theme ;)
why tacan and icls in triggered actions? i always set it in advanced waypoint actions and never had trouble with them
There is a bug in DCS that turns off the TACAN when the carrier passes a waypoint. Setting up triggered actions prevents this.
@@104thMaverick i just tried tacan as advanced action and no issues at all after passing wp1
I just downloaded DCS with CA recently but the ships never listen to my commands set in mission editor (not to mention during the mission) regarding where to go (and starting to stop after a short while), as well as what to fire against to some extend...… planes also have the same problem but way more obedient (though they always start wandering off somewhere at times...)
Can you tell me what happened?
thank you so much chif
Great video, thank you very much!
I did everything, less the triggers and it work pretty well... something wrong gonna happens if I don't set that stuff in the triggers?
Good stuff Maverick
Very Useful thanks
Tried following along with this - but when I go into CLONE the trigger action - there's no Tarawa to select.
“Welcome, to Jurassic Park.”
I think I missing something... when I set up a carrier to do the TACAN/ICLS setup you describe... the carrier quits following the waypoints and plows straight ahead.
how do i add ground crew?
Thanks for the gouge. The one thing I've really struggled with is trying to sort the proper headings in the game. I've had a hard time dialing in the proper BRC and wind over the deck. I'm not sure but I think that the headings the Hornet uses are true and the editor is using magnetic. All I know for sure is this; if I set the heading for the carrier to 000 deg, the real heading I need to fly in the game is about 357 degrees on the Caucasus map. I think that's just about correct MagVar. I know that if feels like there is a crosswind in close, but I don't know if they model the burble in game and that's what I'm feeling. Any additional gouge on the headings?
Its because of the MagVar, it is modelled in the game so you have to take that in to account.... or .... you can just cheat like I do and change the HSI to display TRUE headings instead of MAG headings.
On the HSI page select DATA, then Aircraft and on the right hand side in the middle you'll see the option to switch Heading modes from Mag to True. I normally set this up for the CASE 1 and just use the BRC i have from the mission editor, its a bit cheeky, but it works :)
Excellent thanks!
Wow. I learned more than how to set TACAN and ILS.
Very complicate with lot of steps I will need to re-visited your interesting video with pleasure
Question: How to set the course if the carrier change direction ?
Thanks from CYUL
How do I make one of the planes a player does it do it automatically
Did you figure that out? Hope so it's been 8 months.
Yes I did but I ran into a new problem how do I make the f22 raptor mod work e every time I try lunching as a player it puts a ai instead of moi
I'm now exclusively streaming on TWITCH folks and will no longer be streaming on RUclips! Head over to the Twitch channel to keep up with all the live action! - www.twitch.tv/104th_Maverick
Dear Mav. let me ask you some questions since I am totally new in that kind of staff (DGS)
First of all, this tutorial is in DCS 2.5?
Second, Is the aircraft carrier including in the theater that I have to buy or I have to buy it separately?
Third, the aircrafts in the carrier (except mine) are they accompany my mission or they are static?
Thanx a lot in advance, and sorry for a lot of questions
Hello friend,
Yes the turorial is for 2.5 but it will work in any version.
Yes the aircraft carrier is included with the DCS version.
The aircraft on the carrier are static objects just for show sir.
Thanx a lot for your details but let me ask you. The aircrafts on the carrier are static in general or just for your tutorial?
Hi so when I zoom in it doesn't show me the carrier how do u it after the settings?
On the bottom row you will see an icon that looks like a tank, click on that and it will show you all the units on the editor map
@@104thMaverick Awesome thank u sir!! Like your video 👍😉
Mav does this still apply 2021 on the latest beta on the super carrier?
Yes mate
oh shit you doing editor tutorial? nice one mate, cheers!
Great video thanks
Hi Maverick. I've followed you tutorial ok but I'm failing on the next step! How do you set client spawning slots on the carrier that don't snap back to the centre of the flight deck?
Set them as 'Takeoff from Parking'
@@104thMaverick I only have the option "Take off from parking hot" but that still snaps back to the middle of the flight deck. Confused! (PS. AKA Specter in DCS)
@@Jim610 That's normal
Thanks!
is it just me or is the range on the carriers tacan like less than 10 Nm?
200nm+ sir
@@104thMaverick ahh yes i set up the triggered action incorrectly and it didnt turn on until i was 7 nm from the boat....Thanks for the help I subbed
Ship simulator and DCS what would happen with that merger?
SweeTtaterpie 3.14 ED did talk years ago about making ships work with the Combined Arms module, users would be able to control ships and fire weapons etc, I’d certainly love to try something like that!
Back in 80s, had the first Microsoft flight simulator on an IBM clone with floppy disks, also a friend up in Canada designed a carrier land game called Jet, it was set up sort of wire frame graphics, I think it's possible for ship simulators to finally merge with aircraft lol.
They really should have made it a little more simple to have the carrier conduct such a simple task. Why would you have a carrier and it not outputting TCN ICLS.
One month on. Still sliding around the deck. XD
Hi there guys!
I'm fairly new to the dcs world life and i'm having troubles setting up spawns on the carrier.
Can someone point me in the right direction on how to do this please?
I tried generating a scenario and adding the carriers, then using my own methods to get a potential spawn point but i was greeted with a never ending "wait" message :(
Hi Andy,
I know this isn't ideal but until the new carrier DLC is available the best way to have people spawn on the boat is spawning them directly on to the catapults by selecting 'Takeoff from Runway' in the starting option. Once the new DLC is out we should have a lot more options for where people spawn.
Cool vid.
Seriously? No way to just loop the way point?
Seems messy to just play way points on-top of each other.
Eh, maybe I'm just too OCD about that stuff.
you can now set the last waypoint to switch to w/p 1 in the advanced list it will just keep going. Hope this helps.
@@Sfxduo awesome news, I know this works for aircraft but didn't know it worked for ships.
@@DaSnowFangs sorry told you wrong you were right dont work for ships just tried it
@@Sfxduo Damn, got excited there X)
@@DaSnowFangs does seem rarther crazy you cant do it with the boats
Lol, hey bud its pronounced TERRORWAH. friendly correction ship is named after a WW2 battle in the pacific islands...
DCS👎ARMA3👍