Nice vid, just about to tackle the front oil return pipes, handy to find out where the timing marks and tensioner are. Informative without blabbering on about non-important stuff, just how YT vids should be .
Quick question bud head gasket base does it sit between the bottom end and the head gasket i need to replace my head gasket but not sure if in need the base gasket aswell cheer
Hello budy, how are you? Out of curiosity, what engine oil do you use and how often do you replace it? I noticed that the camshaft is very clean. Sign that perhaps uses a good oil.
I run rotella to 15w40 in it now changing every other weekend but that cam has 175000 miles on it using amsoil metric bike oil changing every 8000 miles
I don't measure stack height honestly. I'm still on a hand clutch so no real need to be that accurate. I have a stock basket with OEM steels and fibers I swapped 1 thin steel for an additional a thick one. I have 2 heavy diaphragm springs and a mtc single stage lockup. My busa has the toruqe modifier welded and 3 brocks xhd springs with 3 stock springs.
Thx for your advice, my dad is helping me but it's nice to know how to actually do it😊
Nice vid, just about to tackle the front oil return pipes, handy to find out where the timing marks and tensioner are.
Informative without blabbering on about non-important stuff, just how YT vids should be .
Hey do you live near Michigan I need new rings on my bike but I don’t trust myself to do it
I run a shop called 57 Motorsports in Tuscumbia Alabama
Hey , I’ve skimmed the head I’m put on . Did you use higher torque setting ?
What torque did you use?
Thanks
Quick question bud head gasket base does it sit between the bottom end and the head gasket i need to replace my head gasket but not sure if in need the base gasket aswell cheer
If you don't remove the block you don't need a base gasket
Thank you
Hello budy, how are you? Out of curiosity, what engine oil do you use and how often do you replace it? I noticed that the camshaft is very clean. Sign that perhaps uses a good oil.
I run rotella to 15w40 in it now changing every other weekend but that cam has 175000 miles on it using amsoil metric bike oil changing every 8000 miles
@@RingTuned thanks for your answer. 👍
I changed my oil and filter on a 600 mk1 1997 bandit now the oil light is on permanently. Any ideas on what it could be?
Somehow you have the wire running to the oil pressure switch shorted to ground
@@RingTuned cheers buddy I'll have a look at it.👍 I had oil pan off twice looking for a blockage 😆.
Will you do one on clutch set ups amd stack height 🤔
I don't measure stack height honestly. I'm still on a hand clutch so no real need to be that accurate. I have a stock basket with OEM steels and fibers I swapped 1 thin steel for an additional a thick one. I have 2 heavy diaphragm springs and a mtc single stage lockup. My busa has the toruqe modifier welded and 3 brocks xhd springs with 3 stock springs.
same technique on a bandit 600?
Yes sir very similar
@@RingTuned cheers bud
What cams are you running?
Gsxr1100
@@RingTuned what year?