BMW E36 Door panel pocket repair

I repair my 98 BMW E36 door panel drive side it been come off.
-Remove all pocket ,side brackets and top bracket bar
-Cleaning using wire brush or 320 sand paper(remove original glue or grease)
-I using Barge all purpose cement apply both side door and pocket or side bracket
Using Binder Clips and clamp(USING MASKING TAPE ON CLAMP TO PROTECT DOOR LEATHER). to hold over 24h or overnight with Temp higher than 45Degree
-next day remove paper & clamp and check all pocket and bracket side make sure all nice and strong 💪 (if not repeat first step again )
-Now time to put back door together and plug all wire
Barge All Purpose Cement
www.amazon.com...
Binder Clips Paper Clamps
www.amazon.com...

[@fxzn]

the pockets on my door all broke instantly, shattered into many pieces. do you know where i can get new pockets?

[@MrHengDoItAll]

Try eBay .

[@luenyoni6603]

Hey, nice video, how well did it hold up?

[@MrHengDoItAll]

This the best stuff so far. Make sure all old debris gone before apply new glue. It will hold much better . Thank

[@luenyoni6603]

@@MrHengDoItAll nice, thank you

[@sebastiandisaz148]

What glue did you use?

[@MrHengDoItAll]

Barge All Purpose Cement . check link bring you to Amazon site

[@biminjo6999]

Can i use window adhesive from 3m as glue?

[@MrHengDoItAll]

@@biminjo6999 you can try with those methods. Whatever my knowledge. You find something stick with small debris and dust and vibration a lot. And long term last . good luck all E36 fans