How do you feel the cost effectiveness, increased range, and versatility of FPV teams compare to traditional Anti-tank teams? like a squad armed with Javalins? Is there still a place for those very expensive, realitively heavy anti-armor weapons? Or does FPV and bomber drones shift things a fair bit?
You're doing an Outstanding job in your mission over there. How does one get money to you for Ukraine without purchasing something? Tell everyone one over there that there are Americans pulling for and supporting Ukraine. Give'em Hell........!
He will be fine, none of the info he shared about FPV is inherently war specific. If you look on RUclips you'll find thousands of videos for learning how to build and fly FPV drones. It's unfortunate that hobby FPV drones are being used for war, but I understand it's making a huge difference for them in defending Ukraine.
@@IamWartinder Hey, no worries. For me, It's sometimes difficult to detect humor in text only 😁. I commented in case to preempt YT mods / reviewers from flagging the video.
A little word of advice, make sure no one is blowing on the solder joints to cool them down faster. It causes micro fractures which will lead to failures of the joints. let them cool down and harden on their own.
@@The_Conspiracy_Analyst well your instructors failed you cuz I learned this in J-STD-001. It's basic info. Don't blow on wet solder joints.. It causes embrittlement.
@@C-V-Zhe was talking about the drones getting damaged during transport. Solder joint failures could be a small part of what he's talking about so it could save them some time. And like Oaks348 said, vibrations are a killer as well.👍
@@JustKeepLivingFPVDetails about fpv have been rare on English speaking channels, so people haven't gotten used to it yet. Brandon Mitchell recently released videos of his visit to a drone team. Those are also good introduction to the subject.
@@CivDiv he would be so mad lmao. fuck Bardwell for real though. never watched so many videos step by step just to get shit fucked up. "you're gonna spend some money today".
@@CivDivas someone that flies fpv I thought this would be the typical cheesy fpv vid done by a non fpv guy but you did good and congrats on getting into the world of fpv. Semper rah
It's a strange feeling seeing my hobby (building, flying, and racing drones) used for war. I hope some day you can join us, the FPV hobbyists flying in peace time for fun instead of war. Good luck, save lives, and stay alive!
@@FriendxA Not these specific FPV drones. These are literally hobbyist grade FPV drones with technology that has only been available for about 10 years.
@CivDiv you show a linearly polarized Yagi-Uda antenna (more in a moment). Most drone (expecially FPV) antennas are circularly polarized and even if linearly polarized will shift between vertical and horizontal as the drone maneuvers (hence the circular polarization) which will mismatch with your base station antenna. This can be cutting your performance in half as well as making you susceptible to EW and generally annoying you in the field. I am a USAF vet turned Research and Development Engineer in the relevant space. I believe I can assist in making your job easier while increasing effectiveness if we can connect privately. Let me know if I can assist you. I can not go beyond the obvious (like polarization mismatch above) in public. Back to the antenna: Yagi-Uda antenna (the xmas tree) have physical dimensions dependent on the frequency they are tuned to. Showing it in video or just someone there snapping a picture shows the enemy what frequency you are going to be on. This is why all USAF antenna for systems like this have radomes. Take an old pair of bdu trousers, cut off all the metal, and stick the antenna in the leg. This will both hide your frequency and break the straight lines computer vision systems are so good at finding. EVERYONE in the AO should be doing something like this as SOP. Also that is something you should really cut from public imaging. To everyone else please upvote this for visibility.
Commenting mostly for visibility of your comment, but also would be interesting to know your opinion - do you think the patch antenna would work better with the circularly polarized mushroom antenna on the drone? Also its so weird that in Ukraine different teams seem to be doing their own things in terms of drone warfare. Why not create some kind of structure within the army that would gather all the data from all the units using drones and manufacturing drones and process it, find best solutions and distribute them among all units, standardize the equipment and methods of operation at least a little bit. Because it seems like some drone units are using very sophisticated technology and tactics such as mothership drones which repeat the signals and drop off FPV drones in target areas, while other units use very basic and simple FPV warfare like how hobbyists operate.
@@georgewashington1621 2 questions that are fairly straightforward to understand IF you have enough background knowledge. I will fill that knowledge in for you but it will take a little bit. Let me go in reverse order. Sorry there are no TLDR answers the will make sense without some knowledge. The US model has had almost 250 years of refinement to land on the single command and control (C&C) structure for combined arms. This maximizes unit effectiveness by always getting best practices standardized, keeping units coordinated, etc (see the difference in performance between Italy and Germany in WWII). That said, it is not the most efficient model and it is VERY hard to do. To have this much control you, by definition, take away autonomy and that means you ALWAYS have to exert that control. IF you can conquer that mountain then you have to keep people from acting autonomously which means you have to meet their every logistical need. If you don't get soldiers every bullet, scrap of chow, pair of socks and underwear, drop of water, liter of fuel, etc then they will not respect that you have things in hand. Let this play out in your mind on how hard it is to supply every single need every second of every day to 500,000 people in a war and how morale, effectiveness, and discipline would break down when you fail if you are claiming that much control. Now because that is so hard most armies in history and often today do not run that model. They run one more similar to kings, dukes, barons, etc in the past. The king has some power to control troops through his subordinates but they also have some autonomy (and some responsibility for failure I might add). you push down the level at which logistics are done making things much cheaper and easier to command in exchange for some loss in c&c. You may WANT to give every unit the best drones and associated equipment, but the reality of the situation is you can't fulfill that all the time so you give each unit some responsibility to fill the gaps and the autonomy to do it how they can. When you can't provide socks to your troops and they have to get their own it doesn't help morale if you then yell at them about the brand they got them from... The units are using whatever skills, knowledge, connections, and resources they have to do their job the best they can. Some have better levels of those things than others. I am offering to bring one of them up for @civdiv unit. ------------ To understand a contested battlespace think of it like a lot of people in a field trying to talk in pairs or groups while moving around and others trying to disrupt them (this is exactly what it is on a scale that is as big as the battlespace actually; they are just talking in RF waves not compression waves). For someone to interrupt you talking to your partner they have to be in the cone one of you are listening to and louder than your partner. The more your pair knows about each other's location and the better technology you have to listen to and focus your own voice in a cone that only includes each other the better chance you have to not be disrupted. If you had infinitely good tracking gimbals and aiming and some technology that let you speak in a straight line like a laser then you would be very hard to disrupt because someone would have to get exactly in the way. As your tracking or aiming technology get worse it becomes more and more likely that someone else will get into one of your 2 cones and have their cone aimed at one of you and have their volume be louder than yours. Hopefully you can see that what you want is whatever antennae will give you the narrowest beam possible that you can keep aimed at your radio pair. The technology of the antennae is only important in this manner (generally). Patch antennae are not really that directional (typically 120+degrees ... this is really unit specific), and if they are using a yagi-uda with that many elements they obviously have better aiming that would allow them to use a better solution for the second channel (they have separate video and control feeds most likely). This is the kind of stuff that defines a unit's effectiveness which is relevant to the other question. (EDIT) let me just add you can polarize different antennae technologies differently. You can make a circularly polarized yagi-uda. In fact you can make a yagi-uda with a switch to polarize it however you want including handedness. There are even better technologies out there that will give even more directionality to the base station if you are willing to give up some universality.
AFAIK there are teams in the background helping them build drones, also there are channels to exchange best practices. Diversity can be a plus here: if there are many different types of equipments they are harder to jam or evade, because each of them has different characteristics. Also like he mentioned: the mission and the environment can make one type of device superior to the other one.
Oh god how did I just see this 😂 BRO seriously thank you. Been writing some names on bombs, yours is gonna be on another, I’ll try and capture a photo of it, and hopefully video soon. This is going straight to our FPV mission. I appreciate you, I hope you know that
Tip: Connect the FC to the receiver with a quick connect (these black plastic things that a pin can be inserted into on one side and just a pin on the other side, look for USB to UART and you will see what I mean) and bring extra sets of receivers + the respective transmitters to your position. If the frequency of your attached receiver is jammed there, you can switch the receiver out in the field, without having to solder.
I'm not an rc guy, so forgive a stupid question, but for my FM radio stuff, the equipment is easily tunable to any frequency, our only restriction is LICENSING. Are drone signals not easily adjustable? Cos on my 200W FM transmitter, I punch the frequency into the front panel....
@@ThatSockmonkey You can't. RC is mostly packet based these days and set at a specific narrow frequency. But there are different protocols operating at different frequencies. ELRS for example has kit for both 2.4ghz and 900mhz.
@@richard3051 no, you're totally right 🤣 didn't occur to me until you mentioned it and then I remembered the massive tunable coils inside the 2U rackmount cases... Sorry, I had a little derp moment.
UART means Universal Asynchronous Receiver/Transmitter, it's a standard protocol for devices or components to communicate and also known as serial (as in "serial ports" you might find on old PCs or printers). You only need two wires, one to transmit (TX) and one to receive (RX), although there are usually two more for power and ground. The TX port of one device is connected to the RX of the other and vice-versa. It's extremely common.
In the hobby, the video systems go like this - analog, "digital" (The original digital - the DJI ecosystem), Walksnail(digital), and HDzero(also digital) each with their pros and cons. Also for goggles, you really only need the DJI goggles (unless you're using other digital fpv systems) because you can get an analog adapter for it. There are various video receiver modules to attach to goggles as well which boost reception, and there are a variety of video transmitters on the market with differing output power - select the higher output ones for better signal penetration. Yes I'm planning on building my own drone lol just not a kamikaze one.
Been in the FPV circle for over 10yrs building my own etc . I liked team black sheep stuff for long range . TBS discovery Pro long range with UHF got couple miles range with a antenna tracker 👌🏻👍🏻
I recommend extending video and power cables NOT the coaxial antenna cables. its been tested in this lovely community, having coax between your receiver and yagi or cloverleaf can have weird effects on signal strenghth.
@@pianojacq yes, I am mainly talking about antenna extensions. They lower effectiveness with any kind of antenna, circulars patch even the standard antennas
@@svenvanwier7196 I see a lot of myth in these threads and it is great to see more people that have something grounded in real knowledge and experience on these topics. This video is interesting for what it shows but also for where it gets confused.
Remember, the longer the blades used as propellers, the more weight you can carry (via payload). Pretty sure most know that, yet it should still be being improved upon. Better performance equals deadlier capabilities. You can even mount the propellers higher on each side from one another to accommodate long blades on a small chassis.
Great, this will enhance my knowledge for FPV drone usage in Minecraft. Random thing but you've got pretty good skin for being out there and probably not washing on a regular daily basis. Low key kinda jealous. Stay safe out there as always.
It may not be a major concern for a soldier firing rounds off all the time, but if you spend any significant time soldering, definitely use a respirator. If you can. Organic vapour with activated charcoal.
@@silviodanteog Yes, But the difference is in World War 1, 2 and even today. You cant sit down at a table and assemble 5 airplanes from hobby parts in 2 hours and then fly them remotely to kill someone an hour after being built. Did you even think out your comment? Likely not, typical internet troll. SO , Yes the government will take the ability for us to build our drones because of this.
It technically isn't self sufficient if you need to be delivered the parts. Unless you a secret method to make plastic and wires from raw material. Thus, the logistics behind delivering the equipment is critical.
I only clicked the video to read the comments. I just wanted to point out that I also immediately paused the video before it even hit 1 second. Hope my FBI agent is doing well, didn't mean to trigger any alarms 😂
Ive been building FPV quads for over 5 years... always knew it was a matter of time before they were being used as weapons... a civilian can hit a target at 10 miles away for a few hundred $$. I just hope this doesnt cause a ban. These weren't designed to be used as weapons
I didn't realize you were Canadian until I heard you pronounce "solder". Makes me flinch every time haha. Keep up the good work and the good videos Brother!
I remember someone making a scale B-17 bomber FPV plane, which they flew through a FPV flight chair to simulate actual controls. Doubt it would be feasible in the battlefield, but would be cool to imagine none the less imo lol.
Been building and flying for a few years now, freestyle drones for fun. There is a big learning curve building, programming and flying them. Fun as hell though.
Awesome, I've always been into networking and programming but ever since the Russia-Ukraine war drones have been the most interesting topic I've studied in a bit! Thanks for giving more information on this topic!
The engineering is magnificent and these things are what scares me more than anything else on the battlefield. Knowing that your movements could be monitored at ANY TIME without your knowledge.
Wonder if you could start using alternative frequencies, like 433MHz, Lora modules, for control. Maybe 900-something for video. If they are jamming 2.4 and 5Ghz, should be good on different frequencies. Less attenuation on lower frequencies may help during the terminal attack phase of flight. If you try it, I'd like to know how it goes.
Я сьогодні дещо навчився.
BARDWELL ❤️❤️❤️❤️ you are amazing, we all love you here
josh you really happy they weaponized our hobby?
this is your life legit. what if our government decides to ban all drones cuz they been weaponized?
iykyk (Hi josh, met at like 2 events years ago)
@@508fpv Every single technology has been weaponized. Every. Single. One.
How do you feel the cost effectiveness, increased range, and versatility of FPV teams compare to traditional Anti-tank teams? like a squad armed with Javalins? Is there still a place for those very expensive, realitively heavy anti-armor weapons? Or does FPV and bomber drones shift things a fair bit?
These comments are funny af, love you guys
Agree
You're doing an Outstanding job in your mission over there. How does one get money to you for Ukraine without purchasing something? Tell everyone one over there that there are Americans pulling for and supporting Ukraine. Give'em Hell........!
@@friendofcoalHis Bunkerbranding page has a possibility to buy a gift card. Just don't use it when you get it in your email.
@@friendofcoalHis shirt page has a possibility to get a gift card. Just don't use it.
@@friendofcoalThere is a possibility to get a gift card.
LEARNING HOW TO MAKE IEDs WERE GETTIN ON A LIST WWOOOOOOOOOOOOO
You didn’t watch the video 😅 nothing illegal was shown.
He will be fine, none of the info he shared about FPV is inherently war specific. If you look on RUclips you'll find thousands of videos for learning how to build and fly FPV drones. It's unfortunate that hobby FPV drones are being used for war, but I understand it's making a huge difference for them in defending Ukraine.
@@oneeyefpv One imagines Ukraine war vets will flinch any time they hear a drone for the rest of their lives.
@@oneeyefpv I was making a joke I know how FPV drones are supposed to be used
@@IamWartinder Hey, no worries. For me, It's sometimes difficult to detect humor in text only 😁. I commented in case to preempt YT mods / reviewers from flagging the video.
A little word of advice, make sure no one is blowing on the solder joints to cool them down faster. It causes micro fractures which will lead to failures of the joints. let them cool down and harden on their own.
good tip, but Tbh i don't think any of these drones ever last long enough to have a subpar joint fail lol
You don't have a CLUE what you're talking about. J STD 002 Tech here
Vibrations can be a quick killer of solder joints :) @@C-V-Z
@@The_Conspiracy_Analyst well your instructors failed you cuz I learned this in J-STD-001. It's basic info. Don't blow on wet solder joints.. It causes embrittlement.
@@C-V-Zhe was talking about the drones getting damaged during transport. Solder joint failures could be a small part of what he's talking about so it could save them some time. And like Oaks348 said, vibrations are a killer as well.👍
This is a definite watchlist entry ticket 🤣
I didn't see anything here that I haven't seen anywheres else
@@JustKeepLivingFPVDetails about fpv have been rare on English speaking channels, so people haven't gotten used to it yet. Brandon Mitchell recently released videos of his visit to a drone team. Those are also good introduction to the subject.
@@pacifist9805 yeah I've watched him already
Thanks for the recommendation@@pacifist9805
hi, your NSA agent here. you haven't gotten off of our list in the past 13 years.
ah yes I’m getting my name on the watchlist again
No your not it’s a RUclips video bud
@@PnwPryo is a joke comment
Watchlist of Russia certainly not, bc YT is American. If you're Russian you will get on the American one for sure!
Again? You mean you’ve been on it already?
@@merr3453 shhh
CivDiv starting his Joshua Bardwell arc. I think we're going to learn something today
We’re laughing at this comment, Bardwell is our god out here lol
@@CivDiv hell yeah man. keep up the good work. thanks for reporting from the ground so us turds living easy can be aware of how shit is going down.
Bardwell knows all
@@CivDiv he would be so mad lmao. fuck Bardwell for real though. never watched so many videos step by step just to get shit fucked up. "you're gonna spend some money today".
@@CivDivas someone that flies fpv I thought this would be the typical cheesy fpv vid done by a non fpv guy but you did good and congrats on getting into the world of fpv. Semper rah
RUclips tutorials in 2024 feel different 💀
Fr brooo
Free Palestine 🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸🇵🇸
WW3 is here. Better brush up
@@aljazeelchannelAm yisrael chai 🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱
@@aljazeelchannel🇮🇱🇮🇱🕎🕎✡️✡️✝️☦️
It's a strange feeling seeing my hobby (building, flying, and racing drones) used for war. I hope some day you can join us, the FPV hobbyists flying in peace time for fun instead of war. Good luck, save lives, and stay alive!
Drones have been used for war longer than it’s been your “hobby”.
Drones as a concept are a military invention.
@@FriendxA Not these specific FPV drones. These are literally hobbyist grade FPV drones with technology that has only been available for about 10 years.
The military is willing to recruit people like you. I think you can make even a decent amount of money there
@@tyshchenkoyevhen People willing to work for corruption is how Russia has so many troops ;)
My FBI Agent: “Not sure if insurrection or academic curiosity…”
Bud it’s a video your fine
Bud it was a joke, you're fine@@PnwPryo
@@FLAGMACHINE11family guy put a catoon pistol on a drone to get a bat in their upstairs floor of their house. The bat took the gun .
Just ukrainian solidarity but yes, it's a good cover isn't it. Just make your videos look like you're in ukraine but it's really mexico lol
@@AckzaTVВ Мексике фпв дроны активно используют картели. Для войны с полицией и армией.
@CivDiv you show a linearly polarized Yagi-Uda antenna (more in a moment). Most drone (expecially FPV) antennas are circularly polarized and even if linearly polarized will shift between vertical and horizontal as the drone maneuvers (hence the circular polarization) which will mismatch with your base station antenna. This can be cutting your performance in half as well as making you susceptible to EW and generally annoying you in the field.
I am a USAF vet turned Research and Development Engineer in the relevant space. I believe I can assist in making your job easier while increasing effectiveness if we can connect privately. Let me know if I can assist you. I can not go beyond the obvious (like polarization mismatch above) in public.
Back to the antenna: Yagi-Uda antenna (the xmas tree) have physical dimensions dependent on the frequency they are tuned to. Showing it in video or just someone there snapping a picture shows the enemy what frequency you are going to be on. This is why all USAF antenna for systems like this have radomes. Take an old pair of bdu trousers, cut off all the metal, and stick the antenna in the leg. This will both hide your frequency and break the straight lines computer vision systems are so good at finding. EVERYONE in the AO should be doing something like this as SOP. Also that is something you should really cut from public imaging.
To everyone else please upvote this for visibility.
Commenting mostly for visibility of your comment, but also would be interesting to know your opinion - do you think the patch antenna would work better with the circularly polarized mushroom antenna on the drone?
Also its so weird that in Ukraine different teams seem to be doing their own things in terms of drone warfare. Why not create some kind of structure within the army that would gather all the data from all the units using drones and manufacturing drones and process it, find best solutions and distribute them among all units, standardize the equipment and methods of operation at least a little bit. Because it seems like some drone units are using very sophisticated technology and tactics such as mothership drones which repeat the signals and drop off FPV drones in target areas, while other units use very basic and simple FPV warfare like how hobbyists operate.
@@georgewashington1621 2 questions that are fairly straightforward to understand IF you have enough background knowledge. I will fill that knowledge in for you but it will take a little bit. Let me go in reverse order. Sorry there are no TLDR answers the will make sense without some knowledge.
The US model has had almost 250 years of refinement to land on the single command and control (C&C) structure for combined arms. This maximizes unit effectiveness by always getting best practices standardized, keeping units coordinated, etc (see the difference in performance between Italy and Germany in WWII). That said, it is not the most efficient model and it is VERY hard to do. To have this much control you, by definition, take away autonomy and that means you ALWAYS have to exert that control. IF you can conquer that mountain then you have to keep people from acting autonomously which means you have to meet their every logistical need. If you don't get soldiers every bullet, scrap of chow, pair of socks and underwear, drop of water, liter of fuel, etc then they will not respect that you have things in hand. Let this play out in your mind on how hard it is to supply every single need every second of every day to 500,000 people in a war and how morale, effectiveness, and discipline would break down when you fail if you are claiming that much control.
Now because that is so hard most armies in history and often today do not run that model. They run one more similar to kings, dukes, barons, etc in the past. The king has some power to control troops through his subordinates but they also have some autonomy (and some responsibility for failure I might add). you push down the level at which logistics are done making things much cheaper and easier to command in exchange for some loss in c&c. You may WANT to give every unit the best drones and associated equipment, but the reality of the situation is you can't fulfill that all the time so you give each unit some responsibility to fill the gaps and the autonomy to do it how they can. When you can't provide socks to your troops and they have to get their own it doesn't help morale if you then yell at them about the brand they got them from... The units are using whatever skills, knowledge, connections, and resources they have to do their job the best they can. Some have better levels of those things than others.
I am offering to bring one of them up for @civdiv unit.
------------
To understand a contested battlespace think of it like a lot of people in a field trying to talk in pairs or groups while moving around and others trying to disrupt them (this is exactly what it is on a scale that is as big as the battlespace actually; they are just talking in RF waves not compression waves). For someone to interrupt you talking to your partner they have to be in the cone one of you are listening to and louder than your partner. The more your pair knows about each other's location and the better technology you have to listen to and focus your own voice in a cone that only includes each other the better chance you have to not be disrupted. If you had infinitely good tracking gimbals and aiming and some technology that let you speak in a straight line like a laser then you would be very hard to disrupt because someone would have to get exactly in the way. As your tracking or aiming technology get worse it becomes more and more likely that someone else will get into one of your 2 cones and have their cone aimed at one of you and have their volume be louder than yours.
Hopefully you can see that what you want is whatever antennae will give you the narrowest beam possible that you can keep aimed at your radio pair. The technology of the antennae is only important in this manner (generally). Patch antennae are not really that directional (typically 120+degrees ... this is really unit specific), and if they are using a yagi-uda with that many elements they obviously have better aiming that would allow them to use a better solution for the second channel (they have separate video and control feeds most likely). This is the kind of stuff that defines a unit's effectiveness which is relevant to the other question.
(EDIT) let me just add you can polarize different antennae technologies differently. You can make a circularly polarized yagi-uda. In fact you can make a yagi-uda with a switch to polarize it however you want including handedness. There are even better technologies out there that will give even more directionality to the base station if you are willing to give up some universality.
@@ninjakittens5255 interesting, thanks for answering! Hope you can get in touch with Civ or anyone and be helpful.
AFAIK there are teams in the background helping them build drones, also there are channels to exchange best practices.
Diversity can be a plus here: if there are many different types of equipments they are harder to jam or evade, because each of them has different characteristics. Also like he mentioned: the mission and the environment can make one type of device superior to the other one.
*Glows
I'm impressed how you have been in so many different roles in all these wars over the years
Also living in his van like a bum. Can't forget that part
Dude isn't even 30 and has lived the three lifetimes
yeah makes you think huh ski
Kinda like how terrorists do in the middle east..
@@ThomasScott-ie5nwbud hé is far from a bum
Thanks for the tutorial, grandma is standing no chance! 👍
ur done bruh straight to the watchlist
You are Eugenecs
skull emoji
Thanks!
noice
Oh god how did I just see this 😂 BRO seriously thank you. Been writing some names on bombs, yours is gonna be on another, I’ll try and capture a photo of it, and hopefully video soon. This is going straight to our FPV mission. I appreciate you, I hope you know that
@@CivDiv youtube blocks hides a lot of comments. Maybe his short"thanks"triggered a bot protection filter
Дякую друже!
Tip: Connect the FC to the receiver with a quick connect (these black plastic things that a pin can be inserted into on one side and just a pin on the other side, look for USB to UART and you will see what I mean) and bring extra sets of receivers + the respective transmitters to your position. If the frequency of your attached receiver is jammed there, you can switch the receiver out in the field, without having to solder.
I'm not an rc guy, so forgive a stupid question, but for my FM radio stuff, the equipment is easily tunable to any frequency, our only restriction is LICENSING. Are drone signals not easily adjustable?
Cos on my 200W FM transmitter, I punch the frequency into the front panel....
@@ThatSockmonkey You can't. RC is mostly packet based these days and set at a specific narrow frequency. But there are different protocols operating at different frequencies. ELRS for example has kit for both 2.4ghz and 900mhz.
@@Stubbino ok, that makes sense. Like cell phones.
@@ThatSockmonkey Jeah, I think radios with adjustable frequencies are a lot heavier than RC radio equipment, but correct me if I'm wrong.
@@richard3051 no, you're totally right 🤣 didn't occur to me until you mentioned it and then I remembered the massive tunable coils inside the 2U rackmount cases...
Sorry, I had a little derp moment.
My Canadian son is on his second tour there. He was inspired by you.
You heroes are my heroes too.
Last tour.
@@arthurwhite1195 take the chill suppository, comrade. the pill isn't working
@@vaizdas-ir-garsas1978 civ div going his 2nd terrorist organization ..... Shame
@@arthurwhite1195alright arthur
@@ThomasScott-ie5nwRussia is the terrorist organization. They are by definition committing genocide.
I am so FUCKING glad you posted again, after your last video.
Thank you for this tutorial, i surely will make use of it.
UART means Universal Asynchronous Receiver/Transmitter, it's a standard protocol for devices or components to communicate and also known as serial (as in "serial ports" you might find on old PCs or printers). You only need two wires, one to transmit (TX) and one to receive (RX), although there are usually two more for power and ground. The TX port of one device is connected to the RX of the other and vice-versa. It's extremely common.
Please add "in Minecraft" to the title, I don't want to get a SWAT visit 🙏
In the hobby, the video systems go like this - analog, "digital" (The original digital - the DJI ecosystem), Walksnail(digital), and HDzero(also digital) each with their pros and cons. Also for goggles, you really only need the DJI goggles (unless you're using other digital fpv systems) because you can get an analog adapter for it. There are various video receiver modules to attach to goggles as well which boost reception, and there are a variety of video transmitters on the market with differing output power - select the higher output ones for better signal penetration. Yes I'm planning on building my own drone lol just not a kamikaze one.
I have a digital hdmi to analog converter to use analog goggles with digital reciever of video . Walksnail or hdzero . It cost $9
Я летаю на 4g. Это тоже цифровая. Но она анлимитед. Формально, я могу быть в другой стране вообще. Пинг очень маленький, это не проблема для полёта.
WE GETTING ON A LIST WITH THIS ONE 🗣🗣🗣🗯🗯❗️❗️❗️❗️
You were likely on a list to begin with, no harm here.
xD
Been on the list
Bud it’s a RUclips video your fine
Thanks! I worry the video might show too much. Take care.
Been in the FPV circle for over 10yrs building my own etc . I liked team black sheep stuff for long range . TBS discovery Pro long range with UHF got couple miles range with a antenna tracker 👌🏻👍🏻
I've been making FPV drones for army on weekends, finally got the goggles to learn with a whoop last week. It feels incredible
Love the usage of the BF3 soundtrack! Brings back some memories. Stay safe and stay cool!
Here before this gate taken down , keep up the good work
haha I thought the same :D
Same
Bud it’s a RUclips video it’s fine
This guy really showed us how to make kamikaze drones...I love this channel
Love these videos man it’s insanely interesting to see how drones are being used now. Stay safe out there💪🇺🇦🇺🇸
I recommend extending video and power cables NOT the coaxial antenna cables. its been tested in this lovely community, having coax between your receiver and yagi or cloverleaf can have weird effects on signal strenghth.
That's because you need to match the antenna to the transmitter and receiver. Impedance mismatch = signal loss.
@@pianojacq yes, I am mainly talking about antenna extensions.
They lower effectiveness with any kind of antenna, circulars patch even the standard antennas
@@svenvanwier7196 I see a lot of myth in these threads and it is great to see more people that have something grounded in real knowledge and experience on these topics. This video is interesting for what it shows but also for where it gets confused.
Fpv is the best hobby
You’re killing me Marine !!
Keep the vids coming and watch your six !!
Semper Fidelis
Remember, the longer the blades used as propellers, the more weight you can carry (via payload). Pretty sure most know that, yet it should still be being improved upon. Better performance equals deadlier capabilities.
You can even mount the propellers higher on each side from one another to accommodate long blades on a small chassis.
Не совсем так. Есть шаг винта. И kv мотора. От них тоже зависит многое.
@@kotnapromke what?
@@MelordJenkins Зависит подъемная сила дрона.
@@kotnapromke huh?
this guy went from fortnite videos to actually going to war. respect ❤️
Great, this will enhance my knowledge for FPV drone usage in Minecraft. Random thing but you've got pretty good skin for being out there and probably not washing on a regular daily basis. Low key kinda jealous. Stay safe out there as always.
I'm an fpv drone hobbyist and have been watching this particular scenario play out. It's both heartbreaking and necessary for the world today.
Lmfao we getting into lists with this one
It my completely uneducated opinion it’s fine as long as u don’t search for it
Bud it’s a RUclips video your fine
@@PnwPryo bud it’s a joke
From frontline fighter to a tech bro building killer machines 😂, keep it up man!
Woooooooo time to be on a alphabet watch list let’s goooooooooooo🎉🎉🎉🎉🎉🎉🎉🎉🎉
thank you for everything youre doing for blackrock, mr fink will be very happy
We need a part 2 of this
THIS was very interesting.
Didn't realize how much time/skill/knowledge is needed to produce and use these..
Literal insane monster
shut up z boy
Thanks for helping my home land 🇺🇸 🇺🇦
Yo, Civ div! Keep up the good fight brother. Stay safe.
I got back into this hobby EXACTLY for this your awesome
It is surreal listening to detailed instructions for the manufacture of "flying IEDs". One can only hope the wrong types are not taking notes here.
It may not be a major concern for a soldier firing rounds off all the time, but if you spend any significant time soldering, definitely use a respirator. If you can. Organic vapour with activated charcoal.
Ive built many fpv drones.
My hearts breaking.
This video is the beginning of the end of recreational fpv.
No it isn't.
I've been hearing fpv is ending since I got into it 10 years ago. Fly on and fuck Russia
Planes have been used for war since WW1 they’re still very popular for non combat don’t worry lol
@@silviodanteog Yes, But the difference is in World War 1, 2 and even today. You cant sit down at a table and assemble 5 airplanes from hobby parts in 2 hours and then fly them remotely to kill someone an hour after being built. Did you even think out your comment? Likely not, typical internet troll. SO , Yes the government will take the ability for us to build our drones because of this.
@@nielsB_FPV Your the problem with FPV. You haven't been at it very long either. You'll learn.
It technically isn't self sufficient if you need to be delivered the parts. Unless you a secret method to make plastic and wires from raw material. Thus, the logistics behind delivering the equipment is critical.
I only clicked the video to read the comments. I just wanted to point out that I also immediately paused the video before it even hit 1 second. Hope my FBI agent is doing well, didn't mean to trigger any alarms 😂
"Totally didn't watch neither download the video"
You have been financially assisted my g, Heal fast jah bless and stay safe
Ive been building FPV quads for over 5 years... always knew it was a matter of time before they were being used as weapons... a civilian can hit a target at 10 miles away for a few hundred $$. I just hope this doesnt cause a ban. These weren't designed to be used as weapons
dude anything these days could be used as a weapon i dont think they even gonna ban this
Such a clear eyed and primary account most savage warfar in Europe in a long time. Keep up the great work, love your insights.
Who knew my bf3 skills would become the real world meta
its a tv missile with throttle control
@@runforestrunfpv4354 control my throttle
Salesman: (slaps top of drone) “this bad boy can commit so many war crimes”
Here before this gets taken down
I love the state and the freedoms she’s blessed me with !
@dogdog2000 H.R.8070 section 1722. DJI was just banned in the United States. Showing shit like this is not helping us in the states.
Thanks for the tip. My nan didn't stand a chance
Battlefield 3 Soundtrack FTW 🗣🗣🗣
Feel like I had to watch this first, have a feeling it’s not going to be around to long 😂
Please teach this to the Kurds 🙏🏼
i better watch this before it gets taken down XD
Def on the watchlist now
Civ Div drunk telling us about bombing drones
It’s a red bull omg 😂
@@CivDivso drunk on redbull you showed us your boobs, man.
@@CivDivsure is fitting to drink something that gives you wings, while going on about drones n stuff lmao
Hellooooooo sponsorship? Lol
I didn't realize you were Canadian until I heard you pronounce "solder". Makes me flinch every time haha. Keep up the good work and the good videos Brother!
Thank you for the work you do for Ukraine!
Fascinating view. I've been missing this type of coverage
The IRS is getting concerned day by day cause of what type of videos i watch
A 3d printed might be packable, or some fiberglass and 2 part epoxy you can manufacture the airframe anywhere.
They def suppressed this from recommended and search xD. If you got recommended this you have a very specific algo lool
I remember someone making a scale B-17 bomber FPV plane, which they flew through a FPV flight chair to simulate actual controls. Doubt it would be feasible in the battlefield, but would be cool to imagine none the less imo lol.
thx for the tutorial🙏🏽🙏🏽
Been building and flying for a few years now, freestyle drones for fun. There is a big learning curve building, programming and flying them. Fun as hell though.
Why not get a drone force job?
@masonmishcon I'm old and have a decent job. Maybe if I was in my 20s..lol
Gonna watch that real quick before it’s gets taken down lol
Would like to see the use of shape charges /paint can claymores on them very easy to make and blasting caps shouldnt be to hard to find
There are many videos where an FPV kamikazi drone is literally carrying an RPG warhead, thats a shape charge effect warhead
Awesome, I've always been into networking and programming but ever since the Russia-Ukraine war drones have been the most interesting topic I've studied in a bit! Thanks for giving more information on this topic!
Been a minute. Good to see you are safe.
BTW: the "L" is silent 😅
The engineering is magnificent and these things are what scares me more than anything else on the battlefield. Knowing that your movements could be monitored at ANY TIME without your knowledge.
Thank you, now time to download
We getting put on a watchlist with this one 🔥🔥
Now i make these with my 5th grade friends!
Intuitive Aerial (made drones for Hollywood shots like Avengers and Bond) used lacrosse sticks as rods for their drones.
Dear FBI I accidentally clicked on the video. But since it already happened i can watch it till the end huh?
honestly its so dope to get such a cool insight to the conflict and your activities
hooray! your still alive! a +1 for all of the lovely ladies out there
... was getting a bit concerned for a while
Using logperiodic antennas you can use the same antenna for all freqencies.
"Ferb I know what we will do today"
Geez, bringing one of those puppies up into the sky is a real artform! You, sir, are an artist!
Not the kamikaze drone shirts 😂😂😂
This video inspired me to make my own kamikazi drone.
Fun school project
Wonder if you could start using alternative frequencies, like 433MHz, Lora modules, for control. Maybe 900-something for video. If they are jamming 2.4 and 5Ghz, should be good on different frequencies. Less attenuation on lower frequencies may help during the terminal attack phase of flight. If you try it, I'd like to know how it goes.
Hi CIA, FSB,MI6, DGSE, MOSSAD, i watch this video only to support Civ Div and for my divertisment
UART is an asynchronous universal receiver/transmitter.
💛🔱💙 Slava Ukraina! Heroyam Slava! ❤️☠️🖤
the fact these are mostly the same parts I use is wild
You should use a fan to take away those soldering fumse. They're terrible for your health. Or at least do it outside
Doesn't it depend on the flux you use?
Being in a war is also bad for health
It's a pleasure being on the flight list with you brothers!
Go to YPG and help them with their FPV program! I will donate!