How to Test Ignition Coils | Ignition Coil, Wiring & ECM Internal Diagnosis
HTML-код
- Опубликовано: 28 авг 2024
- In this video I show you how to test the ignition coil when there is an ignition coil fault code or misfire. I explain the ignition coil wiring diagram & how to find the pins locations and wires. I also explain how to remove the ignition coil and test the primary and secondary winding inside the coil. Then I explain how to test the ignition coil power supply and control line. Then I show you guys how I test the ECM internal circuit if the ignition coil malfunction is caused by ECM internal error.
You might be interested to watch the following videos too:
How to Test Ignition Coils | Coil on Plugs (2-Wire | 3-Wire | 4-Wire) & Ignition Coil Pack
• How to Test Ignition C...
How to Test Ignition Coil Packs (Waste Spark)
• How to Test Ignition C...
Ignition Coil Waveform Analysis | Ignition Coil Diagnosis with Oscilloscope
• Ignition Coil Waveform...
Join the channel for more videos and more support:
/ @automotivediagnosis
Please follow us on the following social media too:
/ autodiag001
/ automotivediagnosis
#ignitioncoil #engine #ecm #sparkplug #misfire
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video. Авто/Мото
You might be interested in watching the following video too:
How to Test Ignition Coils | Coil on Plugs (2-Wire | 3-Wire | 4-Wire) & Ignition Coil Pack
ruclips.net/video/CKnbw3z4YUY/видео.html
Great video your explanation is obviously good. thank you very much for this lesson.
Hi my friend. Thanks for watching the video. I’m glad you liked it.
Po302 on my 2006 Subaru sti. Have done everything I can think of. Swaps, compression and leakdown test, vacuum leak test, crankshaft and camshaft position sensor test and cleaning. Replaced both denso o2 sensors. Tested cylinder 2 connector cam pulsing signal with a noid test kit.
Hi my friend. I assume that you have already swapped the ignition coil with another cylinder. Considering what you have done so far, the next step could be checking the injector #2 and ignition coil #2 wiring. Have you checked the spark on the ignition coil?
excellent presentation. Thank you
Glad you enjoyed it!
you are the best thanks
Thanks my friend
Здравствуйте! Мне нравится ваш труд , очень познавательно. Привет из Кыргызстана!
Hi my friend. Thanks a lot. It’s great to have you here on the channel 😊
Great job Sir
🙏
Many many thanks.
👍👍
i am interested in both mechanical end electronic (pic program) those info about ecu is perfect for me thanks
Glad you like it
Good Work!
Thanks my friend
thank you for your time nice job
Thanks for watching
Swapping coils was the go to . But there are times a bad coil can short driver in computer so swapping will short next driver for that cylinder. But ether way you will meed a computer. DSO wins the day 👊🏻
Thank you sir
👍👍👍
Good job mate
👍👍👍
Thanks
👍👍👍
Thank you sir for this informative video
I’m glad you liked it my friend
Wonderful video thanks for sharing
@@amarabdelli487 Thanks my friend.
Love your channel
😊👍👍
This is beautiful. And how do you get access to the repair manuals (manufacturers).
Hi my friend. For this car I had a software called GDS which provides all diagrams and manuals for Kia and Hyundai. We are also trying to make all our diagrams available for you guys for free. Very soon hopefully.
@@AutomotiveDiagnosis oooh soon. That will be great. Thank you
👍👍
👍👍👍
Gud job sir
Thanks my friend
Will you check transıstors or other electronic materials
Yes, that’s necessary if wiring and ignition coil are good and we still have a code.
🙏
👍👍
Dude, I got a question from you if you don't mind, Wanted to know if you're Iranian originally?