Sure, here are the instructions extracted from the video: 1. **Remove Front Bumper**: - If unsure how to do this, check the bumper removal video on the channel. 2. **Locate Replacement Part**: - Take photos and videos for reference to ensure proper reassembly. 3. **Remove Bolts**: - Remove four 7mm bolts on top of the radiator bar. - Remove one 10mm bolt from each side up top. - Remove two 10mm bolts from the vertical bar in the middle. - Remove two 7mm bolts from each side of the active grille shutter. - Remove a push pin on the passenger side. - Remove one last 7mm bolt at the bottom of the active grille shutter. 4. **Disconnect Wiring Harness**: - Disconnect the one and only wiring harness to lift and remove the active grille shutter. 5. **Install New Grille Shutter**: - Reverse the removal steps to install the new active grille shutter. - Ensure the correct wiring harness is used. These steps should guide you through the process of replacing the active grille shutter on a 2018-2023 Chevy Equinox.
Thanks for this , would this work for a 2020 Chevy Malibu? It’s funny because Firestone and the dealership want me to get a whole new replacement grill shutter because I took it in for because my engine light is coming on and off and the diagnostic says it’s the grill shutter. The Malibu car I got it in 2020 brand new and now in 2024 it has less then 95,000 miles on it. And I never got the grill cleaned before. So I’m skeptical if I should just try the cleaning and see if that helps preventing the engine light coming on
Yes, the video will be similar for your Malibu. Yes!!! Try cleaning it out yourself before paying someone. Heck, you can do all the work yourself. More than likely, it just needs a good cleaning. The active air grille shutters really don’t do anything to begin with. They contribute to a vehicles’s aerodynamics and fuel economy less than 1%. Even, I would rock the car with the engine light on. Good luck keep us all posted - Garrett
I like the video alot.If you don`t mind, can you post the part number of the connector or connectors , that go on the Shutter , my harness was ripped off in an accident. There is a purple , black, and green wires going to it.
Thank you for watching my video. Unfortunately I do not know the part number you’re asking for. I did this job over a year ago on a customer vehicle. I’ll do a little research and get back to you -Garrett
Good explanation. This shutter is something GM adds on to fix a cold weather problem. along with a shield over the charge air cooler (intercooler) Then they add insulation over the turbo control valve. Cold weather still causes problems. You should be driving one of these when it's -40 and half way into your 45 minute commute at 5 in the morning on a deserted road, and the engine goes into "limp" mode. about 7 times the dealer has remedied this by cleaning out (or replacing) the CAC and turbo control valve. Last time wasn't warranty but they snuck it through somehow. Anyone know of a real fix for this? I'm tempted to change the air filter housing so it draws air from under the hood instead of outside. If it makes this winter it's gone, somebody else will be driving this crap next winter.
Good night. I have this exact jeep but the part that the shutter assembly is bolted on is damaged. Can u assist me in locating the name of the part, please? I'm having trouble finding the exact name for it 😩
My active grille shitter is stuck open every time I go to the car wash. (Only been twice since my car has been out of the shop) do automatic car washes negatively affect the operation of the active grille shutters? Can I fix this myself?
Hi Ryan, thank you for your comment. Sounds like a defective part that may need to be replaced. This shouldn't be happening with this new of a car. I'm wondering if there could be something in the way like a rock or pebble that is preventing them from shutting or if there is a split in one of the wires. You'd have to do a little investigating. Pull off the front bumper and check it out. I have a video up on my channel how to remove Equinox bumper if you need some tips to remove it. Thank you for watching and good luck! - Garrett
That’s very odd. I’ve done this several times with no codes popping up afterwards. Hopefully someone can chime in. Do you have a scanner to see what the code is reading?
I’ll create a video in the next couple months. It’s essentially the same process and parts as the Equinox in this video. Thanks for watching and commenting!
Yes. An active grille shutter only provides just a smidge of improved gas mileage. It’s unnoticeable. But when the car does have that active grille shutter working plus all the other tech and design elements working in unison to improve gas mileage that’s when it’s noticeable. So having one thing, your active grille shutter not working or present, won’t be a noticeable gain or increase in MPG. Hope this helps, thanks for watching and commenting!
@@wagonworks803 thanks for the response that makes perfect sense.. I ended up being able to pry the shutters out one by one without removing the front bumper. This saved me $1400 that was quoted by the dealer to replace the system which had malfunctioned and got stuck in the closed position..the car is running much better now.
yo can someone please please please PLEASE give me the part number for this so i can search it online? i need 100% to make sure im buying the right thing bc i'm broke as shit right now, i just NEED this check engine light to disappear lol
Wow… seriously… junk. Well, here is a video to DIY! Good luck, thanks for watching and commenting. Let me know if you have any questions - Garrett / SLA’S GARAGE
Excellent video! I came for a ford active grill guide but this was so well done I watched it all the way through. Nice job!
That’s awesome to hear, thanks a lot! Glad it helped. No matter the car brand, they all should be somewhat similar
Great video
Sure, here are the instructions extracted from the video:
1. **Remove Front Bumper**:
- If unsure how to do this, check the bumper removal video on the channel.
2. **Locate Replacement Part**:
- Take photos and videos for reference to ensure proper reassembly.
3. **Remove Bolts**:
- Remove four 7mm bolts on top of the radiator bar.
- Remove one 10mm bolt from each side up top.
- Remove two 10mm bolts from the vertical bar in the middle.
- Remove two 7mm bolts from each side of the active grille shutter.
- Remove a push pin on the passenger side.
- Remove one last 7mm bolt at the bottom of the active grille shutter.
4. **Disconnect Wiring Harness**:
- Disconnect the one and only wiring harness to lift and remove the active grille shutter.
5. **Install New Grille Shutter**:
- Reverse the removal steps to install the new active grille shutter.
- Ensure the correct wiring harness is used.
These steps should guide you through the process of replacing the active grille shutter on a 2018-2023 Chevy Equinox.
Can you make a video on how to replace windshield wiper reservoir?
I’ll try my best! Thank you for watching and commenting
Thank you! How long would this take a mechanic to perform from start to finish?
You’re welcome. You’d save hundreds if not thoughts doing it yourself. It’d take less than a day to do at a shop
Really well explained thanks for sharing 👍
Thank you! I really appreciate the feedback, hope it helps
Thanks for this , would this work for a 2020 Chevy Malibu? It’s funny because Firestone and the dealership want me to get a whole new replacement grill shutter because I took it in for because my engine light is coming on and off and the diagnostic says it’s the grill shutter. The Malibu car I got it in 2020 brand new and now in 2024 it has less then 95,000 miles on it. And I never got the grill cleaned before. So I’m skeptical if I should just try the cleaning and see if that helps preventing the engine light coming on
Yes, the video will be similar for your Malibu. Yes!!! Try cleaning it out yourself before paying someone. Heck, you can do all the work yourself. More than likely, it just needs a good cleaning. The active air grille shutters really don’t do anything to begin with. They contribute to a vehicles’s aerodynamics and fuel economy less than 1%. Even, I would rock the car with the engine light on. Good luck keep us all posted
- Garrett
very detailed. awesome
thank you
Hey thanks a lot! I appreciate the feedback. Hope it helped you out. Thanks for watching DNA DRIVES 😎
-Garrett
I like the video alot.If you don`t mind, can you post the part number of the connector or connectors , that go on the Shutter , my harness was ripped off in an accident. There is a purple , black, and green wires going to it.
Thank you for watching my video. Unfortunately I do not know the part number you’re asking for. I did this job over a year ago on a customer vehicle. I’ll do a little research and get back to you
-Garrett
Thank you my friend.
Thank you for watching our channel! -Garrett
Good explanation. This shutter is something GM adds on to fix a cold weather problem. along with a shield over the charge air cooler (intercooler) Then they add insulation over the turbo control valve. Cold weather still causes problems. You should be driving one of these when it's -40 and half way into your 45 minute commute at 5 in the morning on a deserted road, and the engine goes into "limp" mode. about 7 times the dealer has remedied this by cleaning out (or replacing) the CAC and turbo control valve. Last time wasn't warranty but they snuck it through somehow. Anyone know of a real fix for this? I'm tempted to change the air filter housing so it draws air from under the hood instead of outside. If it makes this winter it's gone, somebody else will be driving this crap next winter.
hello i need a part number for motor this bumper! please
Can you do one for a GMC Acadia
I’ll keep my eye out for the opportunity to do one. They’re going to be very similar, this Equinox and a an Acadia as they’re both GM products
Good job
Thank you for watching! I hope you gained some value from watching this video, let me know if you have any questions
-Garrett / SLA'S GARAGE
Tank you brother for you video
Thank you for watching 😎
What are those rubber flap things on top the grill shutter called?
I’d call it an upper air baffle or upper rad cover, upper radiator baffle cover. Something along those lines. Let me know if that helps!
www.quirkparts.com/oem-parts/gm-oem-new-2018-20-gm-chevrolet-equinox-upper-baffle-assembly-rad-air-gm-84618-992-84618992?origin=pla&gclid=EAIaIQobChMI2piwlaLV_wIVzQlMCh2HOQmBEAQYAyABEgLzl_D_BwE
Good night. I have this exact jeep but the part that the shutter assembly is bolted on is damaged. Can u assist me in locating the name of the part, please? I'm having trouble finding the exact name for it 😩
This may be what you’re looking for: part number 84460245
Good luck, hope this helps!
@slaautomotiveart can you assist with telling me the name of the motor the activate the shutters? Or where I can find it please?
My active grille shitter is stuck open every time I go to the car wash. (Only been twice since my car has been out of the shop) do automatic car washes negatively affect the operation of the active grille shutters? Can I fix this myself?
Hi Ryan, thank you for your comment. Sounds like a defective part that may need to be replaced. This shouldn't be happening with this new of a car. I'm wondering if there could be something in the way like a rock or pebble that is preventing them from shutting or if there is a split in one of the wires. You'd have to do a little investigating. Pull off the front bumper and check it out. I have a video up on my channel how to remove Equinox bumper if you need some tips to remove it. Thank you for watching and good luck!
- Garrett
I’m still getting the code after replacing the active grill any help , does it need any special programming?
That’s very odd. I’ve done this several times with no codes popping up afterwards. Hopefully someone can chime in. Do you have a scanner to see what the code is reading?
Is any programing required after inatallation?
Plug and play! No programming
How do you remove the electronic part
There may be clips or screws holding it in place. Thanks for watching!
Can you show me how to replace a shutter on a 2014 Chevy Malibu
I’ll create a video in the next couple months. It’s essentially the same process and parts as the Equinox in this video. Thanks for watching and commenting!
In your opinion could i just remove the active grille if mine is broken and not replace it?
Yes. An active grille shutter only provides just a smidge of improved gas mileage. It’s unnoticeable. But when the car does have that active grille shutter working plus all the other tech and design elements working in unison to improve gas mileage that’s when it’s noticeable. So having one thing, your active grille shutter not working or present, won’t be a noticeable gain or increase in MPG. Hope this helps, thanks for watching and commenting!
@@wagonworks803 thanks for the response that makes perfect sense.. I ended up being able to pry the shutters out one by one without removing the front bumper. This saved me $1400 that was quoted by the dealer to replace the system which had malfunctioned and got stuck in the closed position..the car is running much better now.
How can you test if this works or not, before I dish out the $$ and time to replace it.
You’d have to hook up a scan tool to it. A scan tool would be able to tell if this system is working correctly or not.
Can you tell me approx price for the part?
Would i do the same thing for a 2018 chevy traverse?
I would imagine they’re very very similar!
Lower one would have been nice.
Wow
yo can someone please please please PLEASE give me the part number for this so i can search it online? i need 100% to make sure im buying the right thing bc i'm broke as shit right now, i just NEED this check engine light to disappear lol
What year is your equinox?
Part number should be 84766744. Make sure it fits your model year and trim level before looking it up and buying it
I have a 2021 equinox with this part already needing replaced what a nice money grab for the dealers to add such useless bs to these pos vehicles
Wow… seriously… junk. Well, here is a video to DIY! Good luck, thanks for watching and commenting. Let me know if you have any questions
- Garrett / SLA’S GARAGE
Remove and replace? you only remove it!! 😒
Reverse the steps to install!