Are you able to use run your Chute bloeker AND and then use a side grass catcher (like the Accelerator grass catcher) without having hardware interferences?
Thank you for this video! More helpful then calling Bad Boy or SCAG! Another guy I know said he left 1/4” gap between the chute and the frame of his mower, so grass is shooting up into his face. I’m assuming he means that when the chute is down, it’s not flush against the frame. How did you make sure it was flush? Thank you.
Brian Mieczkowski You’re welcome and thank you, it’s all in when you’re marking your holes to drill out on the bracket and deck, Some of the holes on the bracket give you some wiggle room to adjust the bolts, , when you look at your bracket you’ll see what I mean and I drilled those holes out just in case I had to slide the plate back or forth a little bit before tightening to get the chute to close flush
I can get it flush but when I do the plate gets stuck on the stupid bracket. I've put it in every possible position on this scag and nothing works. Just gotta deal with it I guess.
I’ve put 4 of these on but I’m forgetful as hell and this is the best video I’ve seen so far, very straightforward. Thank you sir.
Very well articulated from start to finish. You’re a good man! Thank you and God bless.
Hey thanks for this video. I just bought one of these this week and installed it this morning. Your video was extremely helpful!
The Yard Boy thank you! glad I could help 😎
Very good video. Thanks for showing the way!!
Great video, the company I work for just bought 42 of these so this helps me a lot.
Very helpful video..Installing mine tomorrow. Thanks. Hope 2021 is profitable and trouble free..🤞
What about the back part of the deck? How do you keep grass from blowing out of that curved part that the chute doesnt cover?
Nice install thanks for the video!
Like the new content man. Saw your comment on another channel and thought I'd check it out. Keep it up
Josh Ciani thank you!
I am on the fence between Quick Chute and Advance Chute, but quick question - what is the trimmer mount you have on your ROPs? that is the bomb!!!
Are you able to use run your Chute bloeker AND and then use a side grass catcher (like the Accelerator grass catcher) without having hardware interferences?
Thank you for this video! More helpful then calling Bad Boy or SCAG! Another guy I know said he left 1/4” gap between the chute and the frame of his mower, so grass is shooting up into his face. I’m assuming he means that when the chute is down, it’s not flush against the frame. How did you make sure it was flush? Thank you.
Brian Mieczkowski You’re welcome and thank you, it’s all in when you’re marking your holes to drill out on the bracket and deck, Some of the holes on the bracket give you some wiggle room to adjust the bolts, , when you look at your bracket you’ll see what I mean and I drilled those holes out just in case I had to slide the plate back or forth a little bit before tightening to get the chute to close flush
Just make sure you have your mounting plate exactly in the spot you need it fior the chute plate to close correctly before you drill those holes out
I need one for my Scag 30 Walk behind
Does it stay open to mow
Mine won't sit flush. It's annoying
Yeah that sucks, maybe you can make some adjustments to your bolt holes to allow just a little bit more play in its movement?
I can get it flush but when I do the plate gets stuck on the stupid bracket. I've put it in every possible position on this scag and nothing works. Just gotta deal with it I guess.