ANGEL EYES UPGRADE! /// Install DIY - BMW 135i E82 LUX LED
HTML-код
- Опубликовано: 24 июл 2020
- 'How to' instructional video on installing the brand new LUX Angel Eye LED bulbs. These are the H8 189 variety and I HIGHLY recommend them! The old halogen bulbs dated the car quite a bit, these make the car feel much more modern.
Install is on my RHD BMW E82 135i N54. It will be a similar install for E88 and possibly the other 1 series E81 & E82. 3 Series (E92) may need to look at a specialised video.
BUY YOUR ANGEL EYES HERE:
LUX Angel Eye LED H8 189 Bulbs - ebay.to/2WVxP9S
RGB Angel Eye LED Bulbs - ebay.us/f1knrK
SUBSCRIBE HERE: bit.ly/2V1wvkU
Business enquiries: elliottbrooksyt@gmail.com
Other visual mods:
Black leather wheel w/ Red stripe - ebay.to/2ZJPYJo
Black leather wheel w/ M colouring - ebay.to/2CCWjOb
Red leather and alcantara wheel w/ M colouring - ebay.us/EAPi7p
Black alcantara wheel w/ Red stripe - ebay.us/lCsV1o
Camera gear:
GoPro Hero 9 Black - ebay.us/jwb0rw
Rode SmartLav+ Lapel Mic - ebay.to/32XKtc6
Rode Videomic Pro+ Shotgun Mic - ebay.us/Lwz6pC
#BMW #135i #E82
Please note: That the above links in this post are affiliate links and if you go through them to make a purchase I will earn a commission. Keep in mind that I link these companies and their products because of their quality and not because of the commission I receive from your purchases. The decision is yours, and whether or not you decide to buy something is completely up to you. 
Авто/Мото
![Cordae - Saturday Mornings (feat. Lil Wayne) [Official Music Video]](http://i.ytimg.com/vi/z2GYJua09F0/mqdefault.jpg)
Let me know what you want me to do to my car next!
Made that look easy ......looks really nice
I’ve had to since replace my regular headlight bulbs (unrelated) and would now say I’m a pro at removing and reattaching the back of the headlights. It’s a b*tch but if you guide the “teeth” into the holes by cupping the housing and using your fingertips to feel where they need to go - that’s the easiest way. That’s probably super hard to understand but if you give it a go, keep that in mind 🤣
FYI, for anyone wondering why the high beam "inner ring" is brighter than the driving beam "outer ring"...
The inner ring is illuminated directly by the H8, while the outer ring is fed light indirectly through a fibre optic (effectively, the ends of the ring act as a light conduit).
There's no real way, without some kind of shielding, to even them out.
It's just a product of the design.
You’re 100% correct. When I took these lights apart I was interested the see the setup. You can check this out in my “custom LED” vid on my channel
Installing mine next week. Thx:)
You’re welcome! Glad the video helped
@@ElliottBrooks , I have to admit: only germans can make a simple light bulb replacement such a royal pain. I think replacing suspension was easier on this thing.
Hahaha agreed. They also must have children’s hands to fit between the tiny gaps!
@@ElliottBrooks , I was cussing in two languages at once:) but I do like the result.
I have a manual N55 LCI, blue with brown leather, no sunroof, no iDrive. Got abot two dozen videos in my watchlist to get through for making the lights white on these cars. Will be doing this after deciding on what to order. That ballast thing looks huge. I'm fine with the round angel eyes, not trying to mimmick the aggressive looking new style, these will become very desirable just like the E92 M3s because they dont make em like this anymore. My E82 N55 sounds worlds better than any of the new BMWs. Driver focused machines with minimum restrictions, tech gimmicks, opf filters etc.
Nice one. The LCI headlights are super nice. I would upgrade if I could. Changing the angel eye bulbs has a big impact in my opinion! I’ll get aftermarket add ons later down the track, as it’s my preference - but I agree with all of you’re statements - lots of package in these cars! Enjoy and hopefully my videos are a help :)
Hi bro! Nice videos u got there!
I am actually planning to install an oem xenon headlight from my halogen headlight and just wanted to ask if you maybe have any idea how i need to do my wirings from the original adapter? Thanks in advance
I didn’t need to do this myself, but have seen instructions in forums. Give google a search and there might be some pictures
Does your car already have xeons? Did you replace the low beams with LED and you didn’t need anything else?
I reckon invest in a good torch so we can see what you do better.
Are you going to do a manual swap?
Adding a android is a pretty great idea.
Yeah I’ve improved my lighting in the later videos and will be moving towards better lit areas for the future. My car came with xenons. I didn’t replace anything to do with the headlights themselves. Just the LED that powers the angel eye. No manual swap. Android will happen. I’m going to be editing my lights again for more of an M2 style look in the next month or so - subscribe and keep track if you haven’t already!
Did you notice any difference in brightness in the evening, cause that’s my main concern with halogen bulbs. Also did you have to code the car at all or is it plug and play?
The angel eyes don't impact your brightness of your lights. These lux angel eye bulbs were plug and play
Hi Elliot. John from Brisbane here. Do you know of anyone who has installed the lux bulbs in a E87 130i? I emailed lux and they said no, but my headllight/angel light looks very similar??
Thanks John
Hi mate, I would trust what lux says as they’re the makers. You could always try with cheap eBay versions first to test? The lux ones aren’t cheap
How have these held up? Iv seen some videos and the outer halos are significantly dimmer
I ended up upgrading into custom LEDs if you check my channel videos. The issue is the design as these are bouncing light through glass compared to real LEDs.
I’m getting an adaptive headlight warning light immediately after installing these. Do these cause that? Or is the ballast somehow interfering with the adaptive headlight functionality
Potentially if you installed incorrectly and blocked the movement. I have adaptive and had no issues
Just really isn’t anywhere good to tuck all the wires. Guess I’m gonna have to take the cover off again and redo it
@@sswany_ yeah just have Play around with positioning. Use zip ties if you need. Keep it at the back, not the front. Mine used to almost fall out when I opened the back
Hoping someone can help regarding LUX angel eyes, purchased LUX H8 189 angel eyes for my BMW 2010 E82 135i.
I installed one of the lights and tested to verify it is working, however I noticed flickering problems.
When the lights automatically shut off they flicker off, it is not a smooth transition, is this normal?
More worrying, while the lights are fully turned on there is a subtle but noticeable flicker.
Could this be that at time of testing I only had one light swapped over to the LUX? Or defective unit?
Thanks
Can’t say I noticed any flickering. Is this with your eyes or on a camera? They’re independent of each other so shouldn’t have any codependency. I would reach out to where you purchased them and discuss your options
Hi @@ElliottBrooks- Thanks for your fast reply! Yea the flickering is noticeable just from looking at it, I do understand that on camera it will flicker due to the nature of LEDs. Thanks for confirming the units are independent - that rules that one out. I have messaged the seller so hopefully can be resolved. By the way, I managed to get the headlight housing unit off without removing the brake? canisters, it can be done with smallish hands and a bit of patience lol.
@@richardd-nz yes agreed - I’ve since had to get in there for other mods and managed to squeeze my hands in there without removing the boost canisters. Good luck with your mods!
Does this provide a fault code?
No fault codes! They’ve got the extra resistors or what not as part of the setup :)
@@ElliottBrooks thanks for the reply and keep up the good work 👍🏻💪🏻
This work only for xénon version ..
Yes, I believe you are correct
@@ElliottBrooks How do you know if you have the Xenon version? Was it an option or standard on the E82 135i?
@@richardd-nz hey mate, yeah pretty sure all 135i are xenon. Basically there’s Angel eyes headlights and non Angel eye headlights. If you have projectors at the front, they’re xenon - otherwise the reflector type are halogen. For whatever reason, this lines up with your rear light types
@@ElliottBrooks thanks, looks like mine are Xenon. Did you mention in another comment you have since replaced the entire headlight unit? Did you make a video on this?
@@richardd-nz nah didn’t replace the headlight unit but modified the internals. Check out my channel it’s one of my popular videos
hey bro how much you buying?
Sorry - what do you mean?
@@ElliottBrooks i mean this lamp for angel eyes how much you buying it?
Link is in the description. I mention the price in the video
I’ve had trouble with LED angle eyes. The way the halo rings distribute light, the inner rings get ok light, i.e. bright enough to see in the day but not as bright as halogen. The problem is that the outer rings get no light and appear out. I have a hard times trusting pics because all the LED options I’ve tried showed up fine on camera but were completely different in real-life. These lights are super expensive and I’d hate to end up with a great representation on video but terrible in reality like every other option. I could really use the opinion of someone who has compared these LEDs to the stock bulbs insofar as how bright they compare and especially how well the outer ring lights up. Like everything else I’ve seen, these look great on videos but how accurate is that to real-life? Thank you.
This is a very fair comment. The first thing to note is that it’s not the bulbs that cause this problem. It’s the design. If you look at my recent custom angel eye video, I’ve upgraded my lights again - mostly because of the design flaw of the stock lights. Besides completely upgrading them, the LUX bulbs and the brightest you can get. I was thrilled compared to stock, but they’re still not 100% perfect.
@@ElliottBrooks Thanks for your reply. Yes, it’s the distribution of the light into those little slots that will best distribute the light into that outer ring. Some orient the LEDs better and may therefore have a better result which is what I think you’re talking about with respect to the design. It is a design flaw and not a problem with the bulb.
Yes, exactly! Due to the design, it doesn’t matter what bulb you have or what orientation you fix, it will always have limited results. But for an upgrade over stock, it’s well worth it
@@ElliottBrooks yes, and as long as it’s at least as bright in both rings I’d use them.
you need a bulb that is short, if you use regular H8 bulb that will happen, inner ring will light up but the outer will not