My favorite aesthetic mod for my 94 EG Hatch would be the TOP 1 rear diffuser, side skirt splitters and front splitter. BUT, it took forever to get everything... I was given a set of race canards for all of the trouble... Which was nice.
you arent supposed to unbolt the gas tank strap. you put the support for the diffuser on top of the existing bolt and use the supplied bolt to tighten it down, like so he doesnt install wrong
I wasn't a big fan of the integra before i started following the build of this one, now it's right next to the honda civic for me. Please do a detail to the integra!!!
I'm trying to find those exact Seibon carbon rear lip pieces. I can only find them for the 94-98 integra rear bumper but I need them for a 2001 rear bumper.
Wheel Gap is insane. I would say it would look better lowered but I heard your exhaust scrape pulling out the garage. The lip kit and diffuser look amazing. I love that Baltic blue with that spoiler. Just need some bigger wheels. Other than that it's beautiful. Super jealous on the type r k swap.
3M is great. But somehow I can't bring myself to get the MMD louvers for my mustang because they are held on by 3M. I swear it would come off during an impromptu high speed run.
The Bakery Garage actually there’s a lot to unpack once it’s done. It’s absolute chaos right now. The Bluejz got its motor back but then other problems decided to show up.
Looks good man! They're called rear valances by the way the optional side skirts for the integra would look better than the carbon ones in my opinion! 👀
Love this car, I have a dc2 Integra....but it needs different spec wheels. I have had rpf1s in the past on my RSX, but they just dont fit that car well. Look into a x8 wheel with a +35 offset
can you direct me to where you purchased the seibon carbon fiber rear lip/valance/spat (whatever you want to call it)? I checked with them and their website only says for the 94-97 bumper. I would like to know where you got yours from and any kind of SKU if possible to make sure i get the right ones. I'd appreciate it if you could help! thank you!
DAVID I NEED YOUR HELP there’s this 99 integra that just popped up and I’m looking for my first car it has 114k miles and it’s a manual but it does need a bit of work! Should I pull the trigger on it? Or could I perhaps lower the price a bit, it cost 3k
Nice looking rear side pieces, but IMHO they look better when body colored. They're replicas of the OEM Acura body kit for the 98-01 cars, which are next to impossible to find these days, and if you do they're super expensive. Just wish the side skirts were OEM style also, where they flared upwards after the door.
Anyone know of something like this for S550s. For some reason the PP1 doesn’t have a diffuser and looks naked. even tho its supposed to be more “performance” oriented.
This was the most headache in an hour i ever experienced. And i still have the stock exhaust so the diffuser was resting against the muffler and burned off some it the diffuser but it’s fine now lol
@@MidwestDankAlumni Yes it is. It's much better to have the holes in the right place rather than putting stress on the part by trying to make holes that are in the incorrect place work.
@@MidwestDankAlumni Keep your bent parts that will crack overtime away from me as well. Jokes aside, it's obviously not the right thing to do for everything, I wouldn't do things such as drilling new holes or enlarging holes for structural and important parts (anyways if it's something important/structural/part of the suspension and it doesn't fit, just return it and buy a better one, you should only mess around to make stuff fit with things that won't put you in danger.) but for cosmetic stuff that you might need to remove again I definitely would do it. I've done shit like flexing something so it would fit, or put a screw sideways and other shit like that, and in 10 years the plastic around the screw you forced to fit will crack and the thing will pop out like a spring because it's been stressed like that, or it will just bow and not be straight anymore, depends of the type of plastic.
same experience with top one motors, took 4 months to ship, talked to numerous people from customer service who had no idea what they were doing. finally was promised free license plate anglers as a token of patience, okay all I wanted was my diffuser but ight. package showed up with just the diffuser, will not be buying from them again and I would not recommend them to anyone
Good ol Peggy the Teggy.
What’s your favorite aesthetic/aero mod on a car?
Spoiler! Period
A big Wang of course. Canards are nice as well though 👌
Spoiler & Bodykits 🇯🇵🔰
Hey put some itbs on the k20
Looks great! Did you ever get the emissions passed on it?
My favorite aesthetic mod for my 94 EG Hatch would be the TOP 1 rear diffuser, side skirt splitters and front splitter. BUT, it took forever to get everything... I was given a set of race canards for all of the trouble... Which was nice.
Josh Finan yeah dude their customer service is terrible but the products are worth the wait
Their only saving Grace.
Very cool! Gonna need some front aero soon to balance it out!
Cars Simplified it has a seibon lip
Two down, one to go. Now, move on to get BlueJZ back riding.
Two actual.
Drift coupe....
Man is wearing a Fallout 76 shirt.......yikes.
Kang thus why I mentioned it lol
This is sad I can feel the video glitching already
that game has the quality control of a group project that was done by all the lazy kids in class
@@youtubeisgarbage900 if you like it whatever I ain't gonna judge
I was about to say that lol
The brake cleaner stuff works amazing and it doesn’t mess up the chrome on my new rims 10/10 recommend
This Integra just looks so clean and well done. I almost want to say that... this is what a complete project car looks like. Great work David!
It's pronounced say-bon
Mickey from throtl was just at seibon the other day
We love your builds!! 🛠 If you’re in California, sometime, please review our LS3 350z 😁
Beyond A Build would love too! Shoot me an email 👍🏼
I think it will look better if your tires are wider, I don't know if that's really possible tho without rolling the fenders
Raven Music yeah that’s why I mention that at the end. Just gotta get a different set since spacers don’t work with my willwood brake kit
@@ThatDudeinBlue ahhh okay great. it'll look amazing
ThatDudeinBlue good! Spacers are for ricers David!
Whats the song name at: 9:40 ?
And wow. It's the most understated teggy. Just enough meaning business. Just enough.
dude i love the subtle jazz in the background!
One of the best looking Integra’s I’ve seen. Excellent job.
Did Ijust hear “soon to be turbo’d k20a” oh geez can’t wait
Hope there a bigger wheel set up and some suspension mods coming next✌🏽🔰😌
Car looking fantastic! Always been a fan of the Integra...yours is best looking one I have seen in years.
David, your Integra proves that the Honda/Acura DC2 Integra is one of the most beautiful tuner cars out there. It's absolutely gorgeous
The wing finally fits the look with those spats and diffuser on now, good stuff!
you arent supposed to unbolt the gas tank strap. you put the support for the diffuser on top of the existing bolt and use the supplied bolt to tighten it down, like so he doesnt install wrong
I wasn't a big fan of the integra before i started following the build of this one, now it's right next to the honda civic for me.
Please do a detail to the integra!!!
I'm trying to find those exact Seibon carbon rear lip pieces. I can only find them for the 94-98 integra rear bumper but I need them for a 2001 rear bumper.
I love how it’s coming out man it looks sick it’s come along way
Literally the nicest Integra I think I've ever seen.
Wheel Gap is insane. I would say it would look better lowered but I heard your exhaust scrape pulling out the garage. The lip kit and diffuser look amazing. I love that Baltic blue with that spoiler. Just need some bigger wheels. Other than that it's beautiful. Super jealous on the type r k swap.
I love this car, reliable with looks and fun. Good job on this one David
Integra is looking clean! Wish you would put wider wheels so it sits flush with the fenders and put meatier tires like a 215/50/16 would sit nice
am I the only who subscribed for the Integra?
Raven Music probably not, but you’re in the minority
I did too!
i dont really dish these out but i gotta say cleanest build on youtube
3M is great. But somehow I can't bring myself to get the MMD louvers for my mustang because they are held on by 3M. I swear it would come off during an impromptu high speed run.
Absolutely love this car! Can't wait to see it in person.
I used a bunch of 3m tape for my ducktail
Such a nice clean Teggy👌🏽 Would go with different wheels personally but still looks great!
Any update of the 2jz 240sx or the coupe 240sx drift build????
Still nothing
The Bakery Garage actually there’s a lot to unpack once it’s done. It’s absolute chaos right now. The Bluejz got its motor back but then other problems decided to show up.
ThatDudeinBlue appreciate the response man, keep up the great video.
J-front next!
Hope thw 240 makes a comeback soon that's why i subscribe to your RUclips channel in the first place
David, you have litterally done almost everything I thought of doing to an Integra
He needs turbo.
@@Turshin if I get an Integra I'd put a Garrett T32 on it with a greddy intercooler
They’re called rear valences 👍🏽
The stang is looking good David. Loving the Integra so far 😍
Why are you literally EVERYWHERE!? Even on my boy Eight Thoughts’ channel 😂
@@terrabnadia1793 haven't been on his channel in a bit. Stopped watching his content as I haven't found much enjoyment with it anymore
Looks good man! They're called rear valances by the way the optional side skirts for the integra would look better than the carbon ones in my opinion! 👀
9:33 david scraped
My integra got stolen last Sunday. I can’t even watch these videos without feeling sad:(
I hope you get it back dude!
Love this car, I have a dc2 Integra....but it needs different spec wheels. I have had rpf1s in the past on my RSX, but they just dont fit that car well. Look into a x8 wheel with a +35 offset
can you direct me to where you purchased the seibon carbon fiber rear lip/valance/spat (whatever you want to call it)? I checked with them and their website only says for the 94-97 bumper. I would like to know where you got yours from and any kind of SKU if possible to make sure i get the right ones. I'd appreciate it if you could help! thank you!
DAVID I NEED YOUR HELP there’s this 99 integra that just popped up and I’m looking for my first car it has 114k miles and it’s a manual but it does need a bit of work! Should I pull the trigger on it? Or could I perhaps lower the price a bit, it cost 3k
what muffler did you use? i want to change mine on my integra
Surprised you had so many issues with the diffusers. My Rsx center diffuser took me 15 min to install.
Why did zosh sell his rpf1s you guys could have been twinning but yet different
Are you going to warp the Acura Integra
Nice looking rear side pieces, but IMHO they look better when body colored. They're replicas of the OEM Acura body kit for the 98-01 cars, which are next to impossible to find these days, and if you do they're super expensive. Just wish the side skirts were OEM style also, where they flared upwards after the door.
Anyone know of something like this for S550s. For some reason the PP1 doesn’t have a diffuser and looks naked. even tho its supposed to be more “performance” oriented.
looks so good, wheel spacers needed tho.
He can't get spacers with wildwood's but he said he's gonna find some that fit.
rear bumper valance is the term lol. Tegs looking nice.
That car turned out GREAT.
Iv always wandered. Since youtube is your main source of income, can you write off parts as a business expense?
itastain if he has his chanel registered as a business then yes, a lot of youtubers do that i think
Where's the drift coupe?
So which one have you 8nvested more money in? The integra or smurff?
Do you still have the 240?
A rear wiper delete would look good. 😎
Jeff looks like he could be Eddie's brother. Still Loving the Integra content
Where did you get your front lip and side skirts? Dope muffler what brand?
Great Build man! u can use oem acura center caps on those rpf1's they fit, may have to dermal the back of them a bit though.
where did you buy those rear bumper side skirts ?
Compilation of VTEC pulls?
That difusser is so EPIC . Now your car won't leave the ground at 170 mph.
how long did it take to get lmao. mine took 8 months
I'm a collision repair tech and there are alot of mouldings that are held on solely by 3m double sided tape
i would think that wider wheels and tyres would look a bit better
Anyone have a rear subframe brace on their Integra and try to put on a rear diffuser? Does it clear or will you have to chose
either or?
This was the most headache in an hour i ever experienced. And i still have the stock exhaust so the diffuser was resting against the muffler and burned off some it the diffuser but it’s fine now lol
For wheels 15x8/16x8 or x7s
Hope to see ya at gridlife tomorrow
Damn, I wish they made diffusers like this for Corvettes. Im stuck with all Grandpa Mods on my channel.
Wow that's surprising. I thought they made everything for the Corvette.
turshin not any good ones. Or they are 1500 and up
Here for the k20
That is one great looking Integra.
Looks amazing!!🔥🔥
It needs a blue paint job to match the other 2 smurfs
Anyone have try this diffuser on a eg coupe? Thanks
Tint the car?
Why would you struggle trying to flex the whole diffuser to line up the holes with the mounting points when you can just drill new holes ???
Because that's not how you properly work on a car.
@@MidwestDankAlumni Yes it is. It's much better to have the holes in the right place rather than putting stress on the part by trying to make holes that are in the incorrect place work.
Keep your janky cars away from mine then.
@@MidwestDankAlumni Keep your bent parts that will crack overtime away from me as well. Jokes aside, it's obviously not the right thing to do for everything, I wouldn't do things such as drilling new holes or enlarging holes for structural and important parts (anyways if it's something important/structural/part of the suspension and it doesn't fit, just return it and buy a better one, you should only mess around to make stuff fit with things that won't put you in danger.) but for cosmetic stuff that you might need to remove again I definitely would do it. I've done shit like flexing something so it would fit, or put a screw sideways and other shit like that, and in 10 years the plastic around the screw you forced to fit will crack and the thing will pop out like a spring because it's been stressed like that, or it will just bow and not be straight anymore, depends of the type of plastic.
Next time i see you attaching that big wing
The Fallout 76 disses are the cherry on top.
"i caught that!" he says xDD as if he was expecting to drop it lol
The half diffuser is more for the strip lol I always liked the full diffuser better
Track day?
The Integra looks great!
Bro the coffee shop music is fire 🔥 😂
It looks amazing!!!
The front lip just does not click with me. Doesnt flow. But thats just me
need to call them boys at Winning Window Tints!
same experience with top one motors, took 4 months to ship, talked to numerous people from customer service who had no idea what they were doing. finally was promised free license plate anglers as a token of patience, okay all I wanted was my diffuser but ight. package showed up with just the diffuser, will not be buying from them again and I would not recommend them to anyone
Looks dope brother but I think your integra will look even better if your tires were thicker!
What does the diffuser actually do?
Oh so it’s basically like a spoiler for underneath the car helping the air escape faster ?
Try on some mud flap on the teggy
You should get a Red Paint Job on the integra, this way you got one blue car and a hot red one with carbon fiber
he already got it painted, the color he wanted... take it u dont watch all the videos.
Was hoping to find more integra stuff looks like my timing was great
You should put mudguards on it...
To complete the back of your car your missing the spoiler gurney
I was thinking “He’s wearing a Fallout 76 shirt... no bueno” and sure enough he said something about it 😂 car and gamer boys unite!
I wish my integra was running right now.