Thank you for the kind review @Gaminggeek, I'll make the adjustements you told to me ASAP! Anyway, your prints looks amazing and the tutorial was perfect. You're a real pro!
Wow! Thanks for sharing Pasquale's work with us!! After watching your video, I went and checked out his store. Just looking at the freebies he offers and the quality of the work on those, I am amazed. Definitely going to be spending some money there. Thanks again for sharing this. For my gaming purposes, to make these match with my other terrain, I'll have to scale these to 125 or 126% of original size. That or maybe a bit smaller, might work for you too. Cheers mate! Have a great one.
Hey gaming geek great video I was just wondering what speed u use and slicer because I don't get that good prints at .2 later height and i have a ender 3
I use PrusaSlicer default settings at .2. On my Ender 5, I print at .2 as well on Cura after downloading the profile for the Ender 5. I get pretty good results with my Ender 5 as you can see with the Alchemist Workshop that was printed on there, but my Prusa MK3S still gives me the slightly better prints.
Hello, i know its a little old video: But are you printing them in 1:1 as the model comes? I was thinking about scaling up 5-10% but is that even worth it? Hope you can answer :)
hello gaminggeek thanks for the video really nice paint works. i have one question , in this video the army you used is 3d printed if yes then is any link of stl files. thanks again.
I have a mix of miniatures--the skeletons and human army are from Runewars, and there are a few from Reaper. The ones I 3D printed are from Artisan Guild. You can find all the links in the descriptions in this video: ruclips.net/video/iomaxu3cAgU/видео.html
I have printed lots of Printable Scenery buildings and would like the Drennheim buildings to be the same scale. Do you happen to know if there are any scale adjustments needed for the Drennheim buildings to match Printable Scenery?
I didn't scale them but they look good next to each other and you can't tell any noticeable difference. I actually noticed that Printable Scenery itself is not scaled consistently--for example, the Navigator's Guild and Port Tavern seem to be a smaller scale than the Governor's Mansion or Wizard's Tower. So I think Wonder Worlds fits in pretty well with Printable Scenery.
@@gaminggeek241 Thank you! Yes, I have found the same inconsistency with the Printable Scenery scale. Sometimes they release adjusted versions of their models to fix that, but not always.
@@stephenkane304 if you have a CR-10, you can scale them up to 115% to get a better fit also for 32mm minis. Also I'm happy that you guys like my buildings as the Printable Scenery, because those are the best in world to me! Thanks again!
![Megan Thee Stallion - Mamushi (Remix) [feat. TWICE] [Official Audio]](http://i.ytimg.com/vi/5c0_u9PsrsQ/mqdefault.jpg)
I keep saying "June" when I mean "July of 2020." Also, I goofed and said Wonder "Works" instead of "World."
Very nice set, love the painting tutorials.
Thank you for the kind review @Gaminggeek,
I'll make the adjustements you told to me ASAP!
Anyway, your prints looks amazing and the tutorial was perfect.
You're a real pro!
Check the 20% Discount on Wonder Worlds Shop for all the viewers! rebrand.ly/ww4gaminggeek
NOTE: I've update the files! The STL for the Prison's Bridges are now larger!
Thanks, Pasquale! That's awesome.
@@gaminggeek241 I'll send you the updated models!
Wow! Thanks for sharing Pasquale's work with us!! After watching your video, I went and checked out his store. Just looking at the freebies he offers and the quality of the work on those, I am amazed. Definitely going to be spending some money there. Thanks again for sharing this. For my gaming purposes, to make these match with my other terrain, I'll have to scale these to 125 or 126% of original size. That or maybe a bit smaller, might work for you too. Cheers mate! Have a great one.
scale the building up to like 110% to make minis fit better. these STLs do look great. Hope you get more to review.
You did a fantastic job painting this by the way!
Thanks!
Thanks for the heads up! Definitely going to check out his site right now!
Hey gaming geek great video I was just wondering what speed u use and slicer because I don't get that good prints at .2 later height and i have a ender 3
I use PrusaSlicer default settings at .2. On my Ender 5, I print at .2 as well on Cura after downloading the profile for the Ender 5. I get pretty good results with my Ender 5 as you can see with the Alchemist Workshop that was printed on there, but my Prusa MK3S still gives me the slightly better prints.
Hey
Very nice!
Hello, i know its a little old video: But are you printing them in 1:1 as the model comes? I was thinking about scaling up 5-10% but is that even worth it?
Hope you can answer :)
hello gaminggeek thanks for the video really nice paint works. i have one question , in this video the army you used is 3d printed if yes then is any link of stl files. thanks again.
I have a mix of miniatures--the skeletons and human army are from Runewars, and there are a few from Reaper. The ones I 3D printed are from Artisan Guild. You can find all the links in the descriptions in this video: ruclips.net/video/iomaxu3cAgU/видео.html
@@gaminggeek241 thanks👍
I have printed lots of Printable Scenery buildings and would like the Drennheim buildings to be the same scale. Do you happen to know if there are any scale adjustments needed for the Drennheim buildings to match Printable Scenery?
I didn't scale them but they look good next to each other and you can't tell any noticeable difference. I actually noticed that Printable Scenery itself is not scaled consistently--for example, the Navigator's Guild and Port Tavern seem to be a smaller scale than the Governor's Mansion or Wizard's Tower. So I think Wonder Worlds fits in pretty well with Printable Scenery.
@@gaminggeek241 Thank you! Yes, I have found the same inconsistency with the Printable Scenery scale. Sometimes they release adjusted versions of their models to fix that, but not always.
@@stephenkane304 if you have a CR-10, you can scale them up to 115% to get a better fit also for 32mm minis.
Also I'm happy that you guys like my buildings as the Printable Scenery, because those are the best in world to me!
Thanks again!
Did you print these without supports? Or did you add them in?
No supports needed!
@@gaminggeek241 awesome. My friend doesn't believe me
What printer do you use?