I forgot to mention in the video that you need to slice off the bottom of some of the wooden decks from the bridge set (or use 3D Builder to extend down). Some of them have sections that are off the build plate and won't print correctly. Hopefully, Printable Scenery will fix these files.
I've been looking forward to you putting out more Shadow Fey videos. I backed the Shadowfey Wilds Set and so far all of the things I've printed have been great. (Rock Piles, Corpse Giant, Traveler's Camp, Arcanist's Bridge) I also picked up the Arcanists Tower and the Winterdale Gatehouse. I've just been afraid to starting printing those because they take so long and I haven't done anything over 9 hours yet.
Currently printing the bell tower and dragon bones from that kickstarter! They do such a great job! Their kickstarters are a great value! Thanks for the paint guide! As always very helpful!
Oh! And I really like the idea of using that slate gray for the primer. I've need using black. But that gray looks better, less stark. I'll have to pick some up. Thanks!
Yeah, I started off using black but found dark grey to be better. If you can't find Slate, you can also use Krylon Chalky Finish Anvil Gray. It's more expensive than Slate tho.
Hey dude... great videos. I've been following you since the table build video. I'd love to see a quick video on what paints you "generally" use for your terrain. (i.e. Ruins: Americana Slate Gray) and so on. Keep it up!
Awesome video as usual. I would love to see a video of the grotto floors from the Gloomhaven KS from Printable scenery. I struggle a bit with the top texture of the floors from that set. With so many print lines when I have tried to dry brush the tops of the stone it seems like the print lines really stick out much worse than say buildings from PS. I would love to see or hear how you've done this.
I don't have a video of the grotto floors but here is a video of the ruins and I haven't had issues with print lines that much: ruclips.net/video/-B9yzY7cgIs/видео.html In fact, the grotto floors have a little bit more texture to them so drybrushing hasn't emphasized the print lines. I print at .2mm height.
I forgot to mention in the video that you need to slice off the bottom of some of the wooden decks from the bridge set (or use 3D Builder to extend down). Some of them have sections that are off the build plate and won't print correctly. Hopefully, Printable Scenery will fix these files.
I've been looking forward to you putting out more Shadow Fey videos.
I backed the Shadowfey Wilds Set and so far all of the things I've printed have been great.
(Rock Piles, Corpse Giant, Traveler's Camp, Arcanist's Bridge)
I also picked up the Arcanists Tower and the Winterdale Gatehouse.
I've just been afraid to starting printing those because they take so long and I haven't done anything over 9 hours yet.
I really like the information your channel has to offer for me as a 3d prinitng person.Appreciate!
Great content as always. But the unsung hero of this video is that shirt! Laughed out loud when I saw it, and now I have to get one just like it.
Currently printing the bell tower and dragon bones from that kickstarter! They do such a great job! Their kickstarters are a great value! Thanks for the paint guide! As always very helpful!
Oh! And I really like the idea of using that slate gray for the primer. I've need using black. But that gray looks better, less stark. I'll have to pick some up. Thanks!
Yeah, I started off using black but found dark grey to be better. If you can't find Slate, you can also use Krylon Chalky Finish Anvil Gray. It's more expensive than Slate tho.
Nice set.
Great vid, love the wood effect and that shirt is so much awesome 😂
Haha! You and Jeff mentioned the Tshirt! I would definitely play if they came out with a Thundarr miniatures game!
Did you print the support pieces @11:24 with supports enabled, or were you able to get away with printing them without?
Hey dude... great videos. I've been following you since the table build video. I'd love to see a quick video on what paints you "generally" use for your terrain. (i.e. Ruins: Americana Slate Gray) and so on. Keep it up!
One word:
Relicblade
Awesome video as usual. I would love to see a video of the grotto floors from the Gloomhaven KS from Printable scenery. I struggle a bit with the top texture of the floors from that set. With so many print lines when I have tried to dry brush the tops of the stone it seems like the print lines really stick out much worse than say buildings from PS.
I would love to see or hear how you've done this.
I don't have a video of the grotto floors but here is a video of the ruins and I haven't had issues with print lines that much: ruclips.net/video/-B9yzY7cgIs/видео.html In fact, the grotto floors have a little bit more texture to them so drybrushing hasn't emphasized the print lines. I print at .2mm height.
The terrain looks great. Who makes the mat that you are using with this terrain?
Thanks for the Video, these look great. Do these need supports or can they be printed as they come? I use an Ender 5 Pro
No supports needed!
Where did you get the gaming mat that everything is set up on? Great setup!
Tablewar: ruclips.net/video/31c9M0RQ2dM/видео.html
@@gaminggeek241, thank you kindly!
So are these resin prints or FDM?
FDM printed at .2mm height and 10% infill.
@@gaminggeek241 thank you!
BUMMM!!!!!! :( why you tempz me like diz !!!!!! My son loves to play with the Scaffoldings and stairs lol.
I do too! 😁