Both products were parts that could be used to upgrade the board with relatively little spending. I was also satisfied with these products, so I can recommend them to those who want to experience them. Also, if you are interested in DIY, please visit the Newbee website as there are many other parts. (200x70 tire / Katana footstop discount code: Kami5off) 두제품 모두 상대적으로 적은 지출로 보드를 업그레이드해 볼 수 있는 부품들이였습니다. 저 또한 만족스러웠던 제품들이였기에 경험해보고 싶은분들께는 추천드릴수 있는 제품들이였습니다. 또한 DIY에 관심있으신 분들은 다른 부품들도 많으니 뉴비 홈페이지를 방문해보시길 바랍니다. (200x70 tire / Katana footstop discount code: Kami5off)
Yeah, I think it was the thickest single tire I've ever used. If you have a chance, buy one and mount it alternately in the front and back. You'll see where it helps your riding style. Thank you as always bro :)
@@KAMiJUINs maybe they could work on the Z3? and replacing the stock shoks with the Taiwan EXA 291R 125mm bicycle rear shock absorber might make it even more amazing 👍
I didn't use Newbee Rev1 hubs. I used hubs from the previous generation of Rev1. So the width of the hubs was different. (Rev1 Outer width: 76mm / Mine 65mm) The width of the hub is too narrow to be mounted on a major standard hub, and the diameter of the hub is much larger than the inner diameter of the tire to be mounted on a track & road hub. And even if you purchase the hub together, it will not fit the major gear drive adapter... It seems to me that is impossible.
I love me so thick, wide wheels. I really wish Mboard novas were wider. But they are just slightly unbalanced then the sunmates that came stock with the board.
Oh, is that so? I didn't know because I had not used it. I guess that as the performance of the boards gets better and better, there will be a lot of thick tires and wheels on the market in the future. Let's wait and see Thank you for watching :)
Were you riding in Songdo on Friday (24th) around Noon this past week? I was on my Flow and passed someone also riding an esk8 who looked like you… well, the helmet anyways! 😂
Now with those tyres the Acedeck reminds me of a Losi DBXL 😅😅👍🏾 Finally the board looks like it’s got the correct proportions. Just to clarify, could I put these hubs & tyres on a Z3?
Thanks :) Hubs are perfect for adapter compatibility on gear drives with this. Check it out acedeckboards.com/products/acedeck%C2%AEx-linnpower%C2%AE-next-racing-wheel
@@KAMiJUINs Do the stock NYX wheels have adapters that you can swap onto those Next wheels? Or should I buy a set of adapters from Acedeck? I'm planning to purchase the Z3, so would have to get Z3 adapters.
I knew that too, but there was no Trampa's hub that was compatible with that tire, and a special adapter was needed to use the hub for that tire. So I couldn't mount that tire on the Trampa. Thanks :)
I don't think the front wheels will matter, but I'm not sure if the rear wheels and the gear drive adapter will fit... I don't have that hub(rev1) either. Can you check with Newbee? Thank you for watching :)
Both products were parts that could be used to upgrade the board with relatively little spending. I was also satisfied with these products, so I can recommend them to those who want to experience them. Also, if you are interested in DIY, please visit the Newbee website as there are many other parts. (200x70 tire / Katana footstop discount code: Kami5off)
두제품 모두 상대적으로 적은 지출로 보드를 업그레이드해 볼 수 있는 부품들이였습니다. 저 또한 만족스러웠던 제품들이였기에 경험해보고 싶은분들께는 추천드릴수 있는 제품들이였습니다. 또한 DIY에 관심있으신 분들은 다른 부품들도 많으니 뉴비 홈페이지를 방문해보시길 바랍니다. (200x70 tire / Katana footstop discount code: Kami5off)
*Those are wiiide!* 😲
With no bindings 🤩
I love the oil slick/rainbow foot stopper! I'd prob use one for back foot only.
Yeah, I think it was the thickest single tire I've ever used.
If you have a chance, buy one and mount it alternately in the front and back. You'll see where it helps your riding style.
Thank you as always bro :)
These tires look crazy..
I bet they would do well on a suspension board like the propel endeavor
I think so too, but the hub will have to change :)
Thank you for watching!
@@KAMiJUINs maybe they could work on the Z3? and replacing the stock shoks with the Taiwan EXA 291R 125mm bicycle rear shock absorber might make it even more amazing 👍
@@KAMiJUINswill they work on the nomad n1 2in1 geardrive
Your reviews are always great but the 200X70 test ride was hugely valuable. Thank you!
Thank you for watching too :)
looks like both great upgrades!!
Thank you for watching :)
Yeah, these are products that allow you to upgrade your existing board at a relatively low cost.
Excelent...kami...top...
Thank you for watching :)
I think you're using newbee Rev1 hubs, with the moutain boards tires. Could they be mounted on the Lorentz Major Gear drive systems ?
I didn't use Newbee Rev1 hubs. I used hubs from the previous generation of Rev1. So the width of the hubs was different. (Rev1 Outer width: 76mm / Mine 65mm)
The width of the hub is too narrow to be mounted on a major standard hub, and the diameter of the hub is much larger than the inner diameter of the tire to be mounted on a track & road hub. And even if you purchase the hub together, it will not fit the major gear drive adapter... It seems to me that is impossible.
I need these footstop for my esk8 slide sessions!!
Yes they will definitely help you
Thank you for watching bro :)
I love me so thick, wide wheels. I really wish Mboard novas were wider. But they are just slightly unbalanced then the sunmates that came stock with the board.
Oh, is that so? I didn't know because I had not used it.
I guess that as the performance of the boards gets better and better, there will be a lot of thick tires and wheels on the market in the future. Let's wait and see
Thank you for watching :)
Were you riding in Songdo on Friday (24th) around Noon this past week? I was on my Flow and passed someone also riding an esk8 who looked like you… well, the helmet anyways! 😂
That wasn't me. Because it's far from my house...
Thank you for watching :)
Now with those tyres the Acedeck reminds me of a Losi DBXL 😅😅👍🏾
Finally the board looks like it’s got the correct proportions.
Just to clarify, could I put these hubs & tyres on a Z3?
Thanks :)
Hubs are perfect for adapter compatibility on gear drives with this. Check it out
acedeckboards.com/products/acedeck%C2%AEx-linnpower%C2%AE-next-racing-wheel
@@KAMiJUINs Do the stock NYX wheels have adapters that you can swap onto those Next wheels? Or should I buy a set of adapters from Acedeck? I'm planning to purchase the Z3, so would have to get Z3 adapters.
Kami No need to double up on those tyres…😉
I knew that too, but there was no Trampa's hub that was compatible with that tire, and a special adapter was needed to use the hub for that tire. So I couldn't mount that tire on the Trampa.
Thanks :)
Torque block for rear. No footstep
I've a Lorentz Major, would the rev 1 rims and those tyres fit on the Lorentz setup?
I don't think the front wheels will matter, but I'm not sure if the rear wheels and the gear drive adapter will fit... I don't have that hub(rev1) either. Can you check with Newbee?
Thank you for watching :)
Good review bro😊👍
Thank you as always, bro :)
Don't you think at this points it's a bit unnecessary to have an skate? Instead you could upgrade to EUC or emoto like surron?
If I have a chance this year, I'm going to try various things besides skating :)
어우 타이어 좋아 보입니다 ㅎㅎ
네. 보드동력성능만 받쳐준다면 토크발도 잘받고 괜찮은 타이어였습니다.
와 타이어가 진짜 터프하게생겻네요 ㅋㅋㅋ;;;
네 좀 생긴게 강력해보여요, 지름도 적당해서 토크빨이 잘받네요~
Next gen tyres will use car tyres then it will be called a mountain suv board 😁
HaHa Maybe? :)
Thank you as always broooo.