I share your love of these cars. I too was infected at a young age and had to have one. It took me 33 years, but I got one! Install a relay and get 12V to your Pertronix. That should help. Glad that you got the old girl running again! SWEET!!
I know that feeling... Brought my '73 Mach 1 with a 351C 4V and 4 Speed (Gold Glow with Ginger interior) home after some years a few weeks ago. Have always a smile on my face when it starts, runs and smells like it is ;-)
Now you are talking, man! Thats my favorite car. Actually I've fallen in love with 1973 Mach 1 in highschool, thats a rare car to see in Brazil. Now I have a project. I'm restoring too. Good luck and thanks!!! Mine is green. 351C 2bbl
My Dad was a Mustang man. I think he owned every one since 1965. His last was a 1971 Mach1 351 Cleveland w/Ram Air, and a Hurst 4 speed. Great car and sounded great. Dad would down shift going down a grade and you could hear her back fire.
These mustangs are starting to grow on me a little. I love the cleveland and its my personal opinion that you would be hard pressed to find another engine that wakes up so nicely with bolt on parts. I got 1 in my 67 fairlane. The parts available in the after market is really good now.
Good job getting her started, I have a 73 Mach 1 that I am restoring now, it will have a bunch of 72 stuff on it because I never liked the 73 bumpers, so 72 fenders and chrome bumpers it will be. I picked up a cleveland motor a few months ago and will be rebuilding that after I get the rest of the new floor/trunk/quarters welded back in. Good luck, and will be watching for more videos on this car. Thanks a lot.
I had a 71 notchback. Took the 302/3 spd out and plugged in a 351 Windsor and a Borg Warner T10. It regularly blew the doors off of Cleveland equipped Mustangs.
I'm running a built 351C in my truck. I've had an Edelbrock 650, an Edelbrock 750, and most recently a Demon 1900 625cfm. I tuned all three with my AEM wideband O2 gauge. Out of the three, my pick is the Demon 1900 625cfm. My truck has never accelerated harder than it has with that carb on it! The only changes from stock I made was to go two sizes larger (leaner) on the metering rods because it was set very rich out of the box. If you don't mind swapping carbs, I totally recommend the Demon. It isn't very expensive either.
I say we find a good early 429 or 460 core, and build a NICE 472 stroker for this beautiful MACH. A pair of Edelbrock CJ heads, a mild 268 Lunati cam, RPM intake, QF 750 vacuum carb, re-curved stock Motocraft distributor by Parkland Machine, Crites long tube swap headers. Looking at 500 hp. But.... more important 570- plus lb ft. torque! That kind of power isn't too expensive either with a 460. When do we begin?? P.S. I love Clevelands, but I love 429/460's much more. I built one for my 68 Torino and can't drive it without smiling from ear to ear. Fun Fact: Your MACH weighs more than the 66-69 Fairlane too!
No. LOL. If I do anything it would be a 383 stroked Cleveland. Way to much work and money in the 429 swap. I DO like the idea of a 429 build. Maybe we can do it to the 429 in Jack's Marques...
@@AutoRestoMod Stroking a 4bbl Cleveland is a great idea. They really need the stroke to provide the low end torque lost in the ports. Personally, I like 2bbl heads better for the street with stock crank. I think a 385 series build would be fun for the viewers since they're so ubiquitous, and great power-per-dollar. Yank that Cleveland out of the wagon, and show the kids at home how to do the swap with nothing more than a Crites header and motor mount swap kit. It's easier to change plugs on the 460 than an FE in the same body! I bet Crites would love to offer-up a kit for you guys.
Now that's what I'm talking about.. My mach has a 12 to1 460.ported dove heads.comp solid cam.holley 750.or 850.aluminum Factory experimental copy of a cj intake.big top 4spd. Oh yea I love clevlands.BUT ITS ABOUT CUBES.
The only thing really expensive about a big block swap and your mach 1 is to reinforce the frame so the car doesn't break into when you Unleash the Power of that big motor.
great video..... it's nice too see someones dream car get back on the road!...... somewhat?...... time to get her back to fighting form again.....I'll be waiting for those episodes......especially this one after all.... it's basically me! I was born in 73 and my name is..... so I can put my complaint about a full-sized Ford (61 starliner!) on hold so you can get her running thanks!
My cousin had a red 72 mach 1 when i was a kid. I rode in it and was hooked i was probably 10 or so but wanted a mustang from then on. First car, mustang still have it. Also i bought a corvette that had been sittng along time and it had the green goo in the fuel system also.
Dude! My favorite is the 71' Mach 1, When I was 11 I seen it on the Oglethorpe Ford show room floor in Savannah, Ga. when we were picking up Mom's 71 Galaxie 500 2 door hardtop w/ 351 Windsor and FMX trans... I still have the Galaxie 500 and a donor car plus a 71' LTD Brougham. Also I have a 1972 F-250 from Fordland in Lakewood, Co. :) Can you tell I'm a Ford knut:)
It's running rough and rich because you're not getting a full 12 volts to your coil. I just went through this with my F100 that has the resistance ignition wire. Put a new MSD distributor and coil and she was running pig rich and #7 plug wouldn't fire. Checked the coil voltage and it was around 7 volts. Ran a jumper wire from the battery to coil and within 30 seconds she cleared up and started hitting on all 8.
I followed the Lazerus project in Mustang Monthly when you did the first restoration. I own a June of 72 built Qcode Mach1 and was doing a lot of the same things you were. I'm a little surprised at the poor condition of Lazerus in the time since the completion. My car still looks great but I've continued to work to keep it that way. I'll follow the newest restoration with great interest. Best of luck.
Sadly the car went though some hard times away from me. It spent several months outside at a shop. My fault really. I had no where to put the car. Plus the dipping process kept paying us back in bad, bad ways. Lesson learned.
I use to have a mach1 1972 and sadly I sold it...I just bought a Mercury cougar 1971 with a lovely 351 Cleveland bring back the happiness of the sound of Cleveland
Yo Cuz, It still sounds great, got a tremendously cool "chop", I remember riding from Lakeland to Tampa in the back seat(not the most comfortable place to be) to a show ..Bill something or other Ford dealer in Tampa (Currie I think). Let me know when you get ready to road test, I wanna ride in the front seat this time.
Here is a fun fact that Mustang guys like to forget. The 1971 Boss 351 was faster than any Mustang to that point and for many years to come. It ran high 13 in a magazine writeup, faster than any of the big blocks. There has been a a lot of hate for the "big" mustang as it was 12 inches longer and 6 inches wider than the 65 but the wider part helps handling. Look at the prices today, this car has shot up in value.
@@hotrodray9884 Car companies sent their best car to be tested and they would set it up to run fast. The tires were a limiting factor in the day. With modern tires, weight savings thru headers, aluminum heads and intake the these cars are fast. I have a 1971 Mach 1 set up this way and it is quick.
@@AutoRestoMod There is a huge difference between a 15 second car and a 13 second car. There is a site that lists cars by their quarter mile times, the 13 second cars are rare and expensive. Yes, you can put a 351w in a 65 Mustang and make it fast but then it is a different car that can not handle the torque, corner or brake in a safe manner, major modifications are needed. I love all the classic Mustangs but the 71-73 was set up to handle big power and the 351C can make it with a little tweaking.
if you have an old charger that has the engine start 200 to 300 amp mode you can wake that battery up. just take off the battery caps and run the charger to boil it off for 30 minutes let it rest for 15 then do it again for another 30 then rest for 15. keep doing that all day keeping an eye on the fluid level. by the next day you should be able to empty the electrolyte and put fresh in. use the charger again, by end of the second day you should have a fairly good battery again. ive seen it done and it works.
Are you looking for any other ginger interior parts besides door panels. I'm going to buy some parts 5/11/19 off a guy that has a 72&73 coupe for my 72 mach 1. The 73 has a ginger interior but no door panels. If anything comes to mind I can look.
Im still confused why FORD didn't keep the 69 or 70 style for 5 or 6 years I have a 69 and 70 fastback it's no comparison to them horrible styling by Ford just my unwanted opinion still love these old jewels no matter what year
Wow, "horrible styling" tell me how you really feel. I like both body styles for different reasons. I prefer the '71-'73. And I prefer a '69 SportsRoof to a '70. Especially in a 428CJ Mach 1 dressed in Vintage Burgundy with white interior. Mmmmm.
Totally remember Lazarus from the magazine editor days. This car is reason I fell in love with Ginger interiors. Thanks for bringing it out, JEFF.
I share your love of these cars. I too was infected at a young age and had to have one. It took me 33 years, but I got one! Install a relay and get 12V to your Pertronix. That should help. Glad that you got the old girl running again! SWEET!!
Wow really excited about this I got a 72 Mach 1 I’m working on
Majorreflexes
I’m with you there, I have a 73.
I know that feeling... Brought my '73 Mach 1 with a 351C 4V and 4 Speed (Gold Glow with Ginger interior) home after some years a few weeks ago. Have always a smile on my face when it starts, runs and smells like it is ;-)
Right on!
Now you are talking, man! Thats my favorite car. Actually I've fallen in love with 1973 Mach 1 in highschool, thats a rare car to see in Brazil. Now I have a project. I'm restoring too. Good luck and thanks!!! Mine is green. 351C 2bbl
Awesome!! I shared your grin when the old girl started up!
My1971 Mach 1 has been a ton of fun. Had to re-body the car because of rust and rot so yours is holding-up well. Great video!! Keep them coming!!!
You do know that's against the law right?
My Dad was a Mustang man. I think he owned every one since 1965. His last was a 1971 Mach1 351 Cleveland w/Ram Air, and a Hurst 4 speed. Great car and sounded great. Dad would down shift going down a grade and you could hear her back fire.
These mustangs are starting to grow on me a little. I love the cleveland and its my personal opinion that you would be hard pressed to find another engine that wakes up so nicely with bolt on parts. I got 1 in my 67 fairlane. The parts available in the after market is really good now.
Good job getting her started, I have a 73 Mach 1 that I am restoring now, it will have a bunch of 72 stuff on it because I never liked the 73 bumpers, so 72 fenders and chrome bumpers it will be. I picked up a cleveland motor a few months ago and will be rebuilding that after I get the rest of the new floor/trunk/quarters welded back in. Good luck, and will be watching for more videos on this car. Thanks a lot.
Yeah, the Federally mandated bumpers were pretty crappy. Good luck with yours! We'll keep plugging away and shooting video. 😁
Wooo finally my year gets some love.
Nice Mach1 , I look forward to see this one up on the new lift. We need to get Rick to bring back the all Ford show so I can see this car in person.
I had a 71 notchback. Took the 302/3 spd out and plugged in a 351 Windsor and a Borg Warner T10. It regularly blew the doors off of Cleveland equipped Mustangs.
I'm running a built 351C in my truck. I've had an Edelbrock 650, an Edelbrock 750, and most recently a Demon 1900 625cfm. I tuned all three with my AEM wideband O2 gauge. Out of the three, my pick is the Demon 1900 625cfm. My truck has never accelerated harder than it has with that carb on it! The only changes from stock I made was to go two sizes larger (leaner) on the metering rods because it was set very rich out of the box. If you don't mind swapping carbs, I totally recommend the Demon. It isn't very expensive either.
I know that laugh myself 😏. Nothin like a Cleveland
I say we find a good early 429 or 460 core, and build a NICE 472 stroker for this beautiful MACH. A pair of Edelbrock CJ heads, a mild 268 Lunati cam, RPM intake, QF 750 vacuum carb, re-curved stock Motocraft distributor by Parkland Machine, Crites long tube swap headers. Looking at 500 hp. But.... more important 570- plus lb ft. torque! That kind of power isn't too expensive either with a 460. When do we begin?? P.S. I love Clevelands, but I love 429/460's much more. I built one for my 68 Torino and can't drive it without smiling from ear to ear. Fun Fact: Your MACH weighs more than the 66-69 Fairlane too!
No. LOL. If I do anything it would be a 383 stroked Cleveland. Way to much work and money in the 429 swap. I DO like the idea of a 429 build. Maybe we can do it to the 429 in Jack's Marques...
@@AutoRestoMod Stroking a 4bbl Cleveland is a great idea. They really need the stroke to provide the low end torque lost in the ports. Personally, I like 2bbl heads better for the street with stock crank. I think a 385 series build would be fun for the viewers since they're so ubiquitous, and great power-per-dollar. Yank that Cleveland out of the wagon, and show the kids at home how to do the swap with nothing more than a Crites header and motor mount swap kit. It's easier to change plugs on the 460 than an FE in the same body! I bet Crites would love to offer-up a kit for you guys.
Now that's what I'm talking about..
My mach has a 12 to1 460.ported dove heads.comp solid cam.holley 750.or 850.aluminum Factory experimental copy of a cj intake.big top 4spd. Oh yea I love clevlands.BUT ITS ABOUT CUBES.
The only thing really expensive about a big block swap and your mach 1 is to reinforce the frame so the car doesn't break into when you Unleash the Power of that big motor.
Jeff, I can't wait to see this come along, especially since I own a 72 Mach 1 myself (July 12 build date) waiting in my garage.
Hey Joe! Yours is way later than mine. We'll be bumping along on it here in the near.
great video.....
it's nice too see someones dream car get back on the road!......
somewhat?......
time to get her back to fighting form again.....I'll be waiting for those episodes......especially this one
after all.... it's basically me!
I was born in 73
and my name is.....
so I can put my complaint about a full-sized Ford (61 starliner!) on hold so you can get her running
thanks!
Pop bought a72 mach1 in spring at Norris Ford.. Dundalk ..took vacations in it for awhile. My graduation present was that car.
My cousin had a red 72 mach 1 when i was a kid. I rode in it and was hooked i was probably 10 or so but wanted a mustang from then on. First car, mustang still have it. Also i bought a corvette that had been sittng along time and it had the green goo in the fuel system also.
Dude! My favorite is the 71' Mach 1, When I was 11 I seen it on the Oglethorpe Ford show room floor in Savannah, Ga. when we were picking up Mom's 71 Galaxie 500 2 door hardtop w/ 351 Windsor and FMX trans... I still have the Galaxie 500 and a donor car plus a 71' LTD Brougham. Also I have a 1972 F-250 from Fordland in Lakewood, Co. :) Can you tell I'm a Ford knut:)
This car came from Lakewood too. This car and your F250 might have been lot mates.
I remember Lazarus from Mustang Monthly. You and Mark did some cool stuff in that Magazine. Hey I'm Lysdexic also. Mean what I see. :-)
It's running rough and rich because you're not getting a full 12 volts to your coil. I just went through this with my F100 that has the resistance ignition wire. Put a new MSD distributor and coil and she was running pig rich and #7 plug wouldn't fire. Checked the coil voltage and it was around 7 volts. Ran a jumper wire from the battery to coil and within 30 seconds she cleared up and started hitting on all 8.
Yeah, we will be doing a video on how to get the 12 volt signal and keep the original tach.
I followed the Lazerus project in Mustang Monthly when you did the first restoration. I own a June of 72 built Qcode Mach1 and was doing a lot of the same things you were. I'm a little surprised at the poor condition of Lazerus in the time since the completion. My car still looks great but I've continued to work to keep it that way. I'll follow the newest restoration with great interest. Best of luck.
Sadly the car went though some hard times away from me. It spent several months outside at a shop. My fault really. I had no where to put the car. Plus the dipping process kept paying us back in bad, bad ways. Lesson learned.
I use to have a mach1 1972 and sadly I sold it...I just bought a Mercury cougar 1971 with a lovely 351 Cleveland bring back the happiness of the sound of Cleveland
We love our Clevelands around here
Yo Cuz, It still sounds great, got a tremendously cool "chop", I remember riding from Lakeland to Tampa in the back seat(not the most comfortable place to be) to a show ..Bill something or other Ford dealer in Tampa (Currie I think). Let me know when you get ready to road test, I wanna ride in the front seat this time.
I so wish I could have picked up that 73 years ago. The guy that was selling it had started painting it the Ford racing orange color. May one day
Here is a fun fact that Mustang guys like to forget. The 1971 Boss 351 was faster than any Mustang to that point and for many years to come. It ran high 13 in a magazine writeup, faster than any of the big blocks. There has been a a lot of hate for the "big" mustang as it was 12 inches longer and 6 inches wider than the 65 but the wider part helps handling. Look at the prices today, this car has shot up in value.
Arguably the best small block ever made.
Most people fall for that "ringer car" myth.
It was geared and prepped.
They are quick though.
GTO pulled the same trick.
Grandson has a red '71 351C.
@@hotrodray9884 Car companies sent their best car to be tested and they would set it up to run fast. The tires were a limiting factor in the day. With modern tires, weight savings thru headers, aluminum heads and intake the these cars are fast. I have a 1971 Mach 1 set up this way and it is quick.
I've seen Boss 351s pull 13 second times at the Pure Stock drags...It is a stunningly fast car.
@@AutoRestoMod There is a huge difference between a 15 second car and a 13 second car. There is a site that lists cars by their quarter mile times, the 13 second cars are rare and expensive. Yes, you can put a 351w in a 65 Mustang and make it fast but then it is a different car that can not handle the torque, corner or brake in a safe manner, major modifications are needed. I love all the classic Mustangs but the 71-73 was set up to handle big power and the 351C can make it with a little tweaking.
Next time put your meter on DC voltage. 😁 Love the car!
LOL
if you have an old charger that has the engine start 200 to 300 amp mode you can wake that battery up. just take off the battery caps and run the charger to boil it off for 30 minutes let it rest for 15 then do it again for another 30 then rest for 15. keep doing that all day keeping an eye on the fluid level. by the next day you should be able to empty the electrolyte and put fresh in. use the charger again, by end of the second day you should have a fairly good battery again. ive seen it done and it works.
Yes!!!
Hi Jeff try Daytona carburetor parts, they make ethanol resistant carburetor kits.
I'll give them a call! Thanks for the heads up!
Are you looking for any other ginger interior parts besides door panels. I'm going to buy some parts 5/11/19 off a guy that has a 72&73 coupe for my 72 mach 1. The 73 has a ginger interior but no door panels. If anything comes to mind I can look.
Man THANKS! Everything else is fine. Just that dang door panel.
Does it have headers? Flowmaster?
Factory manifolds and turbo mufflers. I can't wait to catch the real sound of it at idle.
Autorestomod Manic Mechanic Gasoline Media thanks.
Check the guys out at West Coast Classic Cougar for the Ginger door replacement pad.
Yeah, I don't think Don has one. But that is a great idea.
Still sounds purdy good, prolly still a little loud riding in the back seat.
Nah, over 100 the wind noise gets you.
Electronic efi would be a good show on how to instal in a car like that.......
Honestly I want to stay carburated. I like the action. 😃😀😃
Saaaaweeeeeeet!
No sweater sound than a Cleveland with a cam
Agreed!
You have to move this car? How much are you thinking of selling her for?
Move it into the garage...not sell it. 😀
@@AutoRestoMod Drat! curses! Oh well. :)
Well you are certainly a PUTZZ.
But you have great taste in mustangs. I have 1 just like it.Mines modified a little tho.
Well, since we're slinging Yiddish slurs...you are a schmuck. At leas you have good taste in cars.
Im still confused why FORD didn't keep the 69 or 70 style for 5 or 6 years I have a 69 and 70 fastback it's no comparison to them horrible styling by Ford just my unwanted opinion still love these old jewels no matter what year
Wow, "horrible styling" tell me how you really feel. I like both body styles for different reasons. I prefer the '71-'73. And I prefer a '69 SportsRoof to a '70. Especially in a 428CJ Mach 1 dressed in Vintage Burgundy with white interior. Mmmmm.
Disconnect that buzzer.
But, but I like my annoying buzzer...😄😆
hahahah