Regarding this short video, it was just recorded for a previous user, who used a less-powerful AC/DC power adapter to power this pump, so it cannot run normally. Just for this purpose.
As to its real spraying performance, currently I temporarily don't have demo video to share, at this moment. Yet, some descriptions on the notes of video may show some info that is useful. For sure, I also suppose that it's a bit pity that video does't show the performance of pump. I agree with this point.
In our pump product, we don't have the 3rd cable. By the way, it's my sincere recommendation that you'd better directly contact the seller who provided you the pump; after all, it's the pump of his/hers and he/she must know more in detail on the pump in your hands.
I think that laptop adapter is not suitable to power this pump. As far as I know, it should be with output capacity of appr. 19VDC. Instead, matching power adapter for this pump is recommended to be with output capacity of 12VDC, 9A (more or less)
@@lilyyan5645 Hello, i want to ask this propump can used with 80watt adaptor? Because i have this product and i use 80watt adaptor. When i use continuesly that's make the cable going very hot and burning the switch controller, but i use with spare time thats not make hot. Sorry bad english.
Yes, you are correct, noisy is deemed as one typical working characteristics of a diaphragm pump product. Instead, brushless DC pump products will work with low noise, yet, they cannot be self-priming. Different types, different performances. For example,. ruclips.net/video/ZxmVLLxj2tE/видео.html or, ruclips.net/video/mh_RXF8sKsI/видео.html
How loud is this type of a pump?
The noise of this type of pump is deemed as loud, since it runs on brushed motor. I didn't measure the exact dB.
How did the video show the working? It would have been clear if an inlet supply of water is given and then the output checked.
Yes there is a positive and negative cable, but there is a third cable at the top if you have Watts or Emails
has anyone tested the actual psi and amp draw of this unit using a 12volt battery source?
How much ampere from the power supply unit supplied to the water pump?
Probably about 8A
Lily Yan: Who in the whole-hell uploads a video *WITHOUT A DEMONSTRATION* of functionality??!
My friend, with all due respect, please do not use word like 'hell'. This is my recommendation.
Regarding this short video, it was just recorded for a previous user, who used a less-powerful AC/DC power adapter to power this pump, so it cannot run normally. Just for this purpose.
As to its real spraying performance, currently I temporarily don't have demo video to share, at this moment. Yet, some descriptions on the notes of video may show some info that is useful. For sure, I also suppose that it's a bit pity that video does't show the performance of pump. I agree with this point.
I have the same pump. There are two wires for the battery and one wire that I did not know
If your pump is the same, there only exist two cables: Positive and Negative. No 3rd cable exists.
Yes there is a positive and negative cable, but there is a third cable at the top if you have Watts or Emails
In our pump product, we don't have the 3rd cable.
By the way, it's my sincere recommendation that you'd better directly contact the seller who provided you the pump; after all, it's the pump of his/hers and he/she must know more in detail on the pump in your hands.
what's the output of adapter should have? 12volt output & how much Amp is need for this pump.
12VDC, 9A or 10A should be OK.
Lily Yan are those for laptops adapter?
I think that laptop adapter is not suitable to power this pump. As far as I know, it should be with output capacity of appr. 19VDC.
Instead, matching power adapter for this pump is recommended to be with output capacity of 12VDC, 9A (more or less)
@@lilyyan5645 p
@@lilyyan5645 Hello, i want to ask this propump can used with 80watt adaptor? Because i have this product and i use 80watt adaptor. When i use continuesly that's make the cable going very hot and burning the switch controller, but i use with spare time thats not make hot. Sorry bad english.
Can you give me an email
OK. alexanderwu110@gmail.com
محلات النسر الذهبي 0097450112213
Very noisy
Yes, you are correct, noisy is deemed as one typical working characteristics of a diaphragm pump product.
Instead, brushless DC pump products will work with low noise, yet, they cannot be self-priming.
Different types, different performances.
For example,. ruclips.net/video/ZxmVLLxj2tE/видео.html
or,
ruclips.net/video/mh_RXF8sKsI/видео.html