For the chrome screw, i myself is unaware about it,if you got some info on it, do share with me too. For the other issue, mine also does not stop, for that i guess u need to add a pressure switch.
Salaam brother I can’t lie I wanted to see a review on one of these tiny pumps but what makes me subscribe and like share this video is the ALLAH HAFIZ AT THE END , I have to say the brotherhood Islam creates can not be matched no where no matter what, be safe ALLSH HAFIZ BRO MY SUPPORT UOU HAVE
Hi, if I undertood your question correctly, you are asking wether it will automatically turn off when we put off the equipment attached to it like a tap or a hose. The answer is No, this is just a pump. If you want to make it work like that you need to install an automatic pressure switch with it. You can buy these switches from the market. They are readily avaliable on different online platforms as well.
It has a filter inside it, so as u know milk contains little particles. So there will be a blockage. According to me, the answer is no, but you should consult someone other.
Hei Brother, I bought one pump DC 12 V , but does not want to work , I plug the cable with electricity 110v . Do I have to use transferred machine to get to work ? Thank you
@@UbaidKhan-cy5zb They are built to maintain constant pressure when flowing through nozzles, on the other hand, a centrifugal pump can have a huge flow rate but cannot force liquid through thin nozzles for mist making, hope u got the answer
يمكن أن يكون لأسباب عديدة. الأول هو وجود بعض جزيئات القمامة الصغيرة بداخله. السبب الثاني يمكن أن يكون محمل المحرك أو جزء مكسور داخل جسم المحرك. إذا كانت لديك بعض المهارات الفنية، أقترح عليك فتح المضخة باستخدام مفك البراغي والتحقق بنفسك من مكان المشكلة. وسوف تضيف إلى معرفتك كذلك. إذا كنت بحاجة إلى أي مساعدة إضافية فأنا هنا.
@@SIMPLEHOMEMADEPROJECTS شكرا على الرد لقد فتحت المضخة ولكن لايوجد كسر ، كل شيء جديد ، ولايوجد كسر ولا أوساخ ، لايوجد إنسداد ، المحرك يعمل ويدور ولكن لايسحب الماء ، لقد وضعت الماء في اتجاه الصحيح( السحب ) ؟؟؟
@@mohamedahmed-th2xr أستطيع أن أفهم اللغة الإنجليزية، واستخدمت مترجم جوجل لفهم ما تقوله. لا أستطيع أن أفهم تعليقك الثاني. لكنني فهمت إلى حد ما أنك فتحته وكان هناك شيء مكسور بداخله. الآن ما هي المشكلة، هل يمكنك التوضيح؟
@@mohamedahmed-th2xr Diaphragm dries and stucks its seat when pump not is use for a long time. I use to experience this every year. (I use this pump once a year for adding water to my heating system.) First time I opened the housing and relieved stuck diaphragm. Next year and on I just powered the motor and tapped housing couple of times (gently) with a rubber mallet until it started sucking water.
@@SIMPLEHOMEMADEPROJECTS I've been considering one of these pumps. No video online seems to show these with a PSI gauge connected. For good reason I'm sure. I suppose it may have its uses, but high pressure is not one of them.
@@WyattsVlog sorry I have no video either. I bought one from Temu 3 weeks ago, and then another five. It does reach 9Bar. When you throttle the output, like running through a 4-6mm irrigation system, it does reach 9Bar. It's a pressure pump, not a flow pump. It irrigates my greenhouse comprising of 18 "spraying droppers which are adjustable" and 6 misters also adjustable. I'm very happy. Regards Graham from South Africa..... But...... It doesn't seem to operate with its "own" pressure switch
Just did a quick test. The pressure switch works on the output of the pump. It works on a differential principle. If I connect the pump with no water in or out it runs. That is a concern for me. However, when all water lines are connected it also runs. When I close the supply off after this little pump with a shut-off valve, it senses the input is there, and senses that there is no output. It then shuts off. So I'm happy with that. So if the water is not moving, it shuts off. I would've like if there was better protection if there was no water coming in. Mine works in tandem with a water irrigation timer.
Really appreciate that there is no annoying music, JazakAllahu Ta'ala.
I actually dry ran this pump today without knowing but not for longer time...will this effects pump ? Pls tell I m panic
diaphragm pump can dry run for a long time, no any problem. don't worry!
Thank you - all I need before buy :)
What diameter hose is used? Thanks
Mine won't stop pumping when the tap is turned off.. (Outlet side) Any clues? What is the chrome screw for at the top? Thank you.
For the chrome screw, i myself is unaware about it,if you got some info on it, do share with me too.
For the other issue, mine also does not stop, for that i guess u need to add a pressure switch.
@@SIMPLEHOMEMADEPROJECTS My apologies, the pump in your picture was different from the one I have here..
Thanks for tuturials
Salaam brother I can’t lie I wanted to see a review on one of these tiny pumps but what makes me subscribe and like share this video is the ALLAH HAFIZ AT THE END , I have to say the brotherhood Islam creates can not be matched no where no matter what, be safe ALLSH HAFIZ BRO MY SUPPORT UOU HAVE
i don't get why it got so many dislikes.. it was a good video
How many Amperes are you using to run it? looks like my power supply is not working, it has 1.25 A and we fail that may be the issue.
Mine is 3 Amps
will it turn off when not in use?
Hi, if I undertood your question correctly, you are asking wether it will automatically turn off when we put off the equipment attached to it like a tap or a hose. The answer is No, this is just a pump. If you want to make it work like that you need to install an automatic pressure switch with it. You can buy these switches from the market. They are readily avaliable on different online platforms as well.
@@SIMPLEHOMEMADEPROJECTS tnx, saw another video, it has a pressure switch inside.
Can we supply power from home switch board directly by using two wires.
No, it operates on 24 volts DC. Your home supply is of 220 volts AC.
@@SIMPLEHOMEMADEPROJECTS then how can I run this motor
@@dhruvakumarchapala5197 using a 24 volts dc power supply
Hey there ;) Nice review of this product. Take care mate.
Are the filters bought separately?
No, they are already included in the package.
Are you running it on 24v?
Yes
Short and simple explanation
We can use 12v 2amp please reply 😢
Yes
can we transfer milk ?
It has a filter inside it, so as u know milk contains little particles. So there will be a blockage. According to me, the answer is no, but you should consult someone other.
What is weight of this pump?
Around 2kg's i guess
Polluted water pump karne se kharap ho jaega?
Iske inlet pr 1 filter hota hai, wo block hojye ga. Polluted water k lye centrifugal pump use kro, jitna zyada polluted hoga, pump k impeller blades utne kam.
Suggest me konsa centrifugal pump sasta, sundar, mazbut rahega?
@@user-ls_xoxo you can purchase the ones used in room air cooler
Hei Brother,
I bought one pump DC 12 V , but does not want to work , I plug the cable with electricity 110v .
Do I have to use transferred machine to get to work ?
Thank you
Yes you need a step down transformer 110 to 12 volt And then a bridge rectifier in order to operate it.
Hi great video where did you get the filter from?
Its already inside there
Show how much meter it can lift water
10 to 12 feet easily
Can this pump work on car 12 v ciggerate charger port ?
Yes
@@SIMPLEHOMEMADEPROJECTS 👍🏻
Why pressure is too low?
@@UbaidKhan-cy5zb They are built to maintain constant pressure when flowing through nozzles, on the other hand, a centrifugal pump can have a huge flow rate but cannot force liquid through thin nozzles for mist making, hope u got the answer
Super make a portable car washer with this
Ask bro need to set meter for this pump.can u plz help me out.
Thanks for your review.
What is the diameter of your hose pipe?
8.5mm
Super 👍
I don’t know friend - it looks like a leaky water pump thanks for the review
what is the size of tube?
0.8Mpa=how many psi please tell
145 psi
@@SIMPLEHOMEMADEPROJECTS Try ~116psi
أنا أملك مثل هذه المضخة انها جديدة و لكن لاتسحب الماء لا أعرف لماذا 😢 ، تصدر صوت وهي جديدة ولكن لاتسحب الماء ، شاعدوني
يمكن أن يكون لأسباب عديدة. الأول هو وجود بعض جزيئات القمامة الصغيرة بداخله. السبب الثاني يمكن أن يكون محمل المحرك أو جزء مكسور داخل جسم المحرك. إذا كانت لديك بعض المهارات الفنية، أقترح عليك فتح المضخة باستخدام مفك البراغي والتحقق بنفسك من مكان المشكلة. وسوف تضيف إلى معرفتك كذلك. إذا كنت بحاجة إلى أي مساعدة إضافية فأنا هنا.
@@SIMPLEHOMEMADEPROJECTS شكرا على الرد
لقد فتحت المضخة ولكن لايوجد كسر ، كل شيء جديد ، ولايوجد كسر ولا أوساخ ، لايوجد إنسداد ، المحرك يعمل ويدور ولكن لايسحب الماء ، لقد وضعت الماء في اتجاه الصحيح( السحب ) ؟؟؟
@@mohamedahmed-th2xr أستطيع أن أفهم اللغة الإنجليزية، واستخدمت مترجم جوجل لفهم ما تقوله. لا أستطيع أن أفهم تعليقك الثاني. لكنني فهمت إلى حد ما أنك فتحته وكان هناك شيء مكسور بداخله. الآن ما هي المشكلة، هل يمكنك التوضيح؟
@@mohamedahmed-th2xr Diaphragm dries and stucks its seat when pump not is use for a long time. I use to experience this every year. (I use this pump once a year for adding water to my heating system.) First time I opened the housing and relieved stuck diaphragm. Next year and on I just powered the motor and tapped housing couple of times (gently) with a rubber mallet until it started sucking water.
Can i use for 30 feet deep
It is not a submersible pump, means it can not work under water, hope you got the answer.
@@SIMPLEHOMEMADEPROJECTS ok thanks
Bhai koi channel forsale hai to batana
How do you adjust the flow rate?thanks
Actually its a 24 volt pump and I operated it first on 12 volts and then on 24 volts.
Nice video
Isme naya kya hai
Sir paturo sa saksakan
Can you write in English
Low presar motar
Waalaikumussalam,
thank U so much sir
Why didnt you connect the pump to a PSI gauge to prove this can reach .8Mpa? I dont think it can. Thumbs down! Bad review
You are right, but i dont have a gauge, sorry for that
@@SIMPLEHOMEMADEPROJECTS I've been considering one of these pumps. No video online seems to show these with a PSI gauge connected. For good reason I'm sure. I suppose it may have its uses, but high pressure is not one of them.
@@WyattsVlog sorry I have no video either. I bought one from Temu 3 weeks ago, and then another five. It does reach 9Bar. When you throttle the output, like running through a 4-6mm irrigation system, it does reach 9Bar. It's a pressure pump, not a flow pump. It irrigates my greenhouse comprising of 18 "spraying droppers which are adjustable" and 6 misters also adjustable. I'm very happy. Regards Graham from South Africa..... But...... It doesn't seem to operate with its "own" pressure switch
Just did a quick test. The pressure switch works on the output of the pump. It works on a differential principle. If I connect the pump with no water in or out it runs. That is a concern for me. However, when all water lines are connected it also runs. When I close the supply off after this little pump with a shut-off valve, it senses the input is there, and senses that there is no output. It then shuts off. So I'm happy with that. So if the water is not moving, it shuts off. I would've like if there was better protection if there was no water coming in. Mine works in tandem with a water irrigation timer.
Angrej bhag yaha se
Scammer