MIKE DIAGNOSES HUGE 1901 GENERATOR for MUSEUM (Roadtrip)
HTML-код
- Опубликовано: 8 июл 2024
- Today Me and Mike take a Roadtrip to see a guy that is in the process of building a Museum. Mike will be working on a Steam Driven Generator. The Museum also houses Engines, Generators and Machine Shop Equipment from the early 1800's
Paid Associate Links:
Some tools and products used on our projects
Surface Conditioning Disc: amzn.to/3USlJuY
Strip Disc 4½": amzn.to/2OzBaHy
Black Hawk 36 Grit Grinding Disc: amzn.to/3XgjTVn
Walter Grinding Disc: amzn.to/3TTTEkO
LED Light pack: amzn.to/364VL2p
Markal Silver Streak Pen: amzn.to/3IIYZq5
Center Punch: amzn.to/3tCLx10
E6000 Glue: amzn.to/3riTI2v
Barge Contact Cement: amzn.to/3ojLODZ
Fisher Space Pen: amzn.to/3r9bFAk
Welding Blanket: amzn.to/3nqY84M
Silicone Paste: amzn.to/3rbLMyC
Surface Conditioning Discs (scrubby pads) amzn.to/3EAvhkL
3M Black Strip Calk: amzn.to/3ERm60p
3M Ribbon Sealer: amzn.to/3kIKvgq
Black Posca Paint Pen: amzn.to/38FsjP8
White Posca Paint Pen: amzn.to/3pAuud9
Alien Tape: amzn.to/35bRmr5
Dyna-Glass Qt: amzn.to/33KDMJr
Dyna-Glass Gal: amzn.to/32Grrq6
Mayhew 37315 Shake n Brake tool: amzn.to/39ff6d1
Chicago Pneumatic Pencil Grinder: amzn.to/377fnxM
Sheet Metal Gauge: amzn.to/2P1Nihy
Sharpie Magnum: amzn.to/2SaEp7u
Carbide Dremel Bits: amzn.to/2QG3K8F
Anti-seize: amzn.to/2OgYta6
www.amazon.com/shop/805roadking 
Авто/Мото
I hope Mike gets back to posting on his channel.
I dont think he will be back. He is in the walhalla of old engines, no stress to post something, probably well paid and having a great time.
Nice to run into Mike on another channel... Been missing his stuff.
Absolutely agree. Was just looking yesterday evening to see if he'd released anything and I'd just missed it.
The proverbial "needle in a haystack". Another "hold my beer" victory for Mr. Wires. You're awesome, Mike!
We miss you, Mike!!🤘👍👌
Mike is the generator king. Love to watch him work and explain how generators work. Mike is number 1 when it comes to generators and all things mechanical. Great video.
Thanks Mike!! Yeah he's the best in the Business!! And he has a natural ability to explain technical stuff in Layman's terms!!☻
This episode is one for the books! So much great stuff. The best part was securing Mike’s Legend status as he located a short and discovered the issue creating it. Also his Growler handle was freaking fantastic! Craig keeps a super tidy shop, everything is placed in order. Excellent episode!!! 😃👍
Thank you Buddy!! I couldn't even see it after he pointed it out it was buried so deep!!☻
He could spend several years in your attic!
The wealth of knowledge that Mike has, consistently blows my mind. I'm thinking he needs to be a big brother to some young Lad on the weekends and teach him as he videos all his ventures.
I was lucky enough to live within about an hour of Mike. he fixed my old military generator when few, including myself, could. And he is a Really nice guy. Thanks Mike!
I really enjoyed this visit and having Mike show us what he was doing. I used to do maintenance of five different powerhouses a good while back and this brought back a lot of memories of years past. Nice seeing all that old machinery In the days when they built machinery and people were proud of what they owned....CHEERS
Thanks Gator!! Mike's the best in the Business!! You two could probably talk for days about all that technical stuff!!☻
The power of visual inspection, what a great catch by Mike. That whole shop is awesome. Especially that tool box. I was imagining the shop smell throughout the video. Thanks for the tour Road King!
Now I see why we haven't seen anything on Miles channel, he's been busy having fun with all this vintage stuff. Would be great to see you back again.
Really enjoy watching and listening to Mike work. His knowledge and patience are extraordinary. That grounded winding would have been the end of the road for that armature if anyone else was working on it. No one would have taken the time to find that wire strand.
Yeah Buddy!! I couldn't even see it after he pointed it out it was buried so deep!!☻
The Mega can be a dangerous device. Some bonehead, tested hot windings, right in the oven, forgetting about the dielectric of hot uncured varnish. Boom! And back to the burnout oven, and of course, it was a rush job...
I liked the 12HP half breed. Made in Bradford PA, whilst I live in the original Bradford in Yorkshire, England. Always enjoy seeing stuff from the namesake city across the pond. I remember when I was young and we all smoked back then like people did, we all had our zippo lighters with the Bradford PA mark.
It's always super interesting to watch Mike in action!
Yeah Buddy!!☻
Good to see you Mike that’s a big amateur hope you stop in Raleigh Nc sometime we can get together cheers
Home made tools always work best I've found! That's a big generator. What a collection! That's back when people were proud of what they make. Lots of detail! Hope you follow-up with it working! I hope there's no more wire brush pieces in it! Good to see Mike. I miss his videos. I've learned a lot from the both of you. Thanks!
Thanks Rod!! Yeah we'll try to keep up with it!! I'm curious to see the whole Museum come together!!☻
It's always a pleasure to watch Mike work. Whether it's on generators new, old, or ancient.
Holy crow. That is a man with expensive tastes. And with many years worth of projects to keep himself occupied. Impressive collection of ironmongery.
Great find by Mike on that huge generator. He is one of the best, lots of knowledge.
Yeah Buddy!! He's the best in the business!!☻
back in the 80's I worked at a rubber plant that had been in operation since the 20's and had a Westinghouse 500hp motor with a mfr date of 1910, running the rubber mixer, started on DC and had to be switched to AC manually, and it had an amazing Rube Goldberg style starting panel.
You started by throwing a knife switch, then turning a rheostat(?) up until a light bulb glowed at a certain brightness, as the motor was spooling up, then there were 2 more knife switches that had to be thrown while simultaneously using a knee to push in a contactor.
If you timed it right the motor would switch to AC and take off, if not, it would slowly wind down and you had to repeat the process.
It was quite the art to starting it!
I thought i knew a lot about old equipment and steam engines until i found your channel, Thank you for the videos proving once again that you are never too old to learn something
Thanks Bud!!☻
I was able to see the light reflecting off the steel wire strand when you first moved across the area where it was lodged. Great camera work.
Thanks Chris!! I couldn't even see it after he pointed it out it was buried so deep!!☻
SmallEngineMechanic wow 👍
how lucky is that....mike is good
Yeah Buddy!!☻
I think Mike must have worked with Tesla himself. He probably can actually see the electrons! Very interesting video as always. Thanks, Everett--- Tom
Thanks Tom!! It's always fun watching Mike Diagnose something, it's like he has a 6th sense!!☻
Simply amazes me the knowledge of Mike when it comes to generators , blows my mind , great vid RK
Thanks Kev!! He's the best in the Business!!☻
thanks for sharing. always love learning from Mike.
Where's the LOVE button? This video needs way more than a like!
Mikes a sharp dude!
Watched Mike work at Coolspring a while back. He's the man!
Amazing piece of equipment. Looking at the letter from 1986, Canadian General Electric was a mainstay in Peterborough, Ontario, Canada (about 1.5 hours from me) for 126 years. Opened in 1892 and closed in 2018.
Another fine video! Thanks. Good to see mike doing his thing as well 🙂
Thanks Terry!!☻
Thanks for the Video with Mike and a bunch of cool old equipment.
Wow, some great Historical pieces, Great find Mike on the Armiture.
Awesome video RK
Thanks for sharing 👍🏻👍🏻
Thanks Bruce!!☻
Very cool watching mike work there, he knows his stuff
What an interesting collection! It's good to see Mike is ok and doing his thing.
THANKS, King! Good for you and looks like Mike is the man again. LOTS of nice old stuff. 'Jonathan W' has a lot of steam stuff too. Blessings!
35:24 - Backus Water Motor Company, built various products. Several instances at Coolspring. Apparently one product was a small turbine that ran off city water pressure, which was then presumably dumped down the drain.
This was awesome to watch! I've really found an interest in old industrial machinery over the last several years. It blows my mind to think of how the Ken of the past were able to manufacture the things they did without the resources we have today. It's very cool to see this stuff being restored for future generations to see, bravo!
Hi Mike!!!!!, awesome to see you.!! Fantastic Job Guys!! Subscriber from New Zealand.
I have seen many videos on RUclips about stationary steam or fossil fuel engines, but, if I understand correctly, it is the first time ever that I have heard of a conversion of a steam engine into an internal combustion engine, this video is a real scoop!!!
Great video that’s an awesome shop would love to see it in person thanks for sharing
Always a pleasure to see Mike at work, the way he knows his stuff and enjoys working on it really gives me an appreciation for early electrical equipment. I never used to have any interest beyond gas engines and now I'm starting to collect smaller generators, this is BS 😂 As always, thank you for taking us along RoadKing! We wouldn't have the opportunity to see this stuff without you!
Thanks Buddy!!☻
13:16 is a safety device for elevators that applies a brake if it starts a free fall.
Thanks Bud!! Never would have guessed that!!☻
Nice one! Great history lesson on the old equipment. Always enjoy!!
Thanks Mac!!☻
I'm amazed at the pin striping on this old equipment ! I worked in a machine shop most of my life and even the oldest equipment in the shop never had this unique !
That was pretty interesting information, Thanks
Its never enough. Especially in a place like this. Mike always amazes with his knowledge. He knows so much not only about generators but so many other things. He's a smart guy for sure. Thank you so much for taking us with you and mike on this trip!
Thanks Bob!! Never a dull moment when ya hangin' with Mike!!☻
I started my generator career fixing DC welders. When I found a grounded winding I would hook up a light bulb in series with the winding and ground and then plug it in to the wall. A hard fault would light the bulb bright and there would be no smoke but a soft fault would light the bulb dim and it would start smoking where the ground was. sometimes just pressure washing the part and then drying it in the oven might clear it other times just let it sit there and burn and try blowing the ash out with air. Sometimes they would burn the fault clear and then dunk it in a tank of varnish. If you couldn't clear a hard fault the winding would have to be rewound. On welders I considered 1 meg good enough to run with but they were all under 100 volts DC. Now this is all on engine driven units the transformer units that hooked up to 208 or 480 shore power were different animals.
From a time when people respected and took care of their equipment !
Great seeing you both together again
Awesome old iron RK!! It’s great that guys like you & Mike can keep these old wheels spinning!!
Thanks Tom!!☻
So nice to see you both working together. Keep on making unique videos guys. Mike and Roadking.
Thanks Vic!!☻
I am wondering if you would tell me your first name Roadking ?? Sorry I forgot fella. Can you find it in your heart to forgive me ?? Thanks you too. vf@@805ROADKING
great video thank you for sharing most of that stuff i know because coming from a farming background i was around a lot of stuff like that but good video thank you for sharing have a great day and God Bless
Using eddy currents to find the winding short is pretty clever. I suppose thermal wouldn't really help much when there is so much mass you can't see anything heat up.
Very interesting stuff. Things that huff and puff and make the world go round.
Thanks George!!☻
What great video and mike knows his stuff thanks for making this great video !
Thanks Richard!!☻
This is incredibly interesting stuff!
Seeing the boiler end plates with Dillon boiler of Massachusetts reminds me of something similar I saw a the Nashua, nh. waste water plant. There is/was the same stuff there as well as a steam power head.
"That's good troubleshooting!" AMEN The steel bristle may have been slung out by centrifugal force but good it was removed by the guy in suspenders.
That armature is a work of art
I always learn a LOT from The Professor! I love seeing him in his element.
It's like going to School hangin' with Mike!! I only wish I could retain what I learn!!☻
Very interesting thank you for the video
Thanks for watching Lil' Joe!!☻
We have/had phenolic and bakelite as insulation in the UK. Used on stuff like breakers and electricity meters.
Man… that’s cool, what a precious armature…, precious gear
22:18 Gerald Scanlan is still alive and well in Venedy Illinois, that was at the Venedy Coal mine in Venedy Illinois
I never heard of this channel, but when I heard Mike I said it can't be the say Mike.. I like your channel, you guys are a good team.
Thanks Bud!!☻
Nice.
Superlative video, gentlemen
Thanks KD!!☻
the old stuff is old , but it is so cool in today's world . Now when some like Mike in today's world makes it work in the American continent and not in ...say Asia or India , it is amazing. Enjoy this so much
Thanks Bud!!☻
When’s Mike gonna make new videos?
The hand cranked insulation tester looks a similar sort of machine to my WM6 Megger tester but it lacks the Wheatstone Bridge of Mike's machine. Wheatstone Bridge takes me right back to school physics classes with wooden and ebonite Wheatstone Bridges for measuring resistance, made by Griffin and Tatlock of London (1888 to 1999).
Awesome video guys. Tell Mike he needs to convert that megger tester so he can run it off a battery powered drill!
Thanks Buddy!!☻
Mike must have X-ray vision to find that little wire wheel wire in the winding.👌😁👍
That is an awesome collection for engine there. Cheers Buddy
Yeah Buddy!! I couldn't even see it after he pointed it out it was buried so deep!!☻
It seems the IDEAL generator for any collector 😅 Jokes apart it's amazing!
These things were made in the days when the companies would ask, If I add 30% will it be more reliable? Unlike today where they ask, If we take 50% out will it still work? Sad😞
Yeah Buddy!!☻
That is for sure!
We miss Mike in Australia!!!
Like your videos but miss you doing videos Mike .
Mike needs to hook a drill motor up to the megger instead of hand crancking it.
great video, need to build a 500V power supply for your megger!
Niiiiiicccceee!!!
That Genset was built to last
Yeah Buddy!!☻
Does Mike own that Megger? Mine is just a simple BM7 model that's good enough for most jobs- it reads up to 100M and has a 500V testing voltage (actually measures 530-540).
That big valve probably came out of a power plant.
Yeah that's Mikes Megger!!☻
Love the old forging hammer.
Wondering if the machine with big governor on it is a tower clock mechanism?
Somebody said those balls were for an Elevator, some sort of fail safe in case of a free fall!!☻
@@805ROADKING yep, elevators used to have governor's on them like that.
On the Alaska Pipeline the pump stations have Cooper/Bessemer PUMPS
(Capitol letters because there bad ass pumps) LOL
Mike needs to get back to videos on his channel..
meggers are dead handy I use a small one to test transformers in vintage radios I am restoring.
Any plans for new generator videos on the main channel?
That’s is from Venedy coal co. Located in Illinois Jerry is my cousin.
I miss Mike and his Small engine channel.
Everything was cast, now we try to print it!
Older fire sprinkler systems have WATER MOTOR GONG Alarms.
When a sprinkler head pops water flows, the Alarm Valve (its a check valve) opens and the clapper swings open and believe it or not there are passages that let water flow to the hinge and out of the valve body into a Retard Chamber (if city presure surges it won't set off the Alarm because it will close)
So with a sprinkler flowing it fills the retard chamber (1-2 minutes) and to a nozzle directed on .. PELTON TURBINE. Turns the shaft and the hammer hits the gong.
I didn't mean to be so long winded, but they are still around. And they are failsafe.
If you ever come across one, you can do alot of fun stuff.
Thanks for the info, we appreciate the detailed explanation!!☻
It is my educated and professional opinion that one should not wire wheel shellac covered armature windings. Seems crazy to me. If the intent is to preserve and conserve what is there, and to make operable again, wire wheel cleaning seems very aggressive. Maybe dry ice blasting would be more appropriate. For a Museum did you say? What does the conservator think of wire wheel cleaning methods? Maybe I am way off base, but I am surprised to hear wire wheel cleaning was used. ----Doozer
You are quite correct! Unfortunately the owner of the machine is not savvy when it comes to electric motors / generators. He saw some of the loose insulation on the windings and went to town removing every bit that was accessible with a wire brush and pick.
At this point I have recommended that the armature be dipped and vacuum impregnated with modern insulating varnish.
@@SmallEngineMechanic Thanks for the reply Mike. It makes for a hard journey through life when someone has a narrow bit of knowledge and a limited scope of operation. But just like one must recognize when they are truly sick enough that it is best to call the doctor, is is beneficial to recognize when someone is dealing with something out of the range of their expertise, that they should also call a person more well versed in that area. I guess the owner of the generator called you, but a dollar short and a day late, it seems to have been. I do find it frustrating to be called into a project after some damage has been done. Like if someone brought me an iron casting to repair, after they tried to weld it themselves, and cracked the whole thing worse than it began. I personally can fix a lot of things. But I will take my wrist watch or dial test indicators in to someone who knows this stuff better than I do. You seem to have more patience with people than maybe I do. It is clear to see that you are also a compassionate person. That is admirable for sure. I keep watching your Small Engine Mechanic channel for more videos. I hope you continue to film them. I loved your work on the big Cat generator. You work carefully, cleanly, and methodically, much the way I approach mechanical things. Keep up the good work, and you are a great example of someone who truly loves machines and cares about preserving the past so it can teach newer generations. ----Doozer
The box is a tool makers chest.
Although it’d be a cryin’ shame to loose sight of all them pretty copper windings but, wouldn’t it be best, since it now passes these tests, to coat it with a good dose of lacquer to help protect from future shorts, once all back together & functioning?
Mike, why did you stop making videos????
Wow.....DC gen, not an alternator? I'm asking based on its appearance.
why did mike stop making vids? i really enjoyed them.
So Mike has a Growler and the Governor has big balls, the internet has ruined my mind, it really has........... :P
So this a pre steam driven turbine power plant generator
Yeah Buddy!!☻
@@805ROADKING cool beans 🫘 there @805ROADKING
i really mis Mikes content just like the channel Elemental maker channel