Brilliant 👏🏾.. I have so much trouble with wiring . I only just getting my head round a wireless stat, I've had one main terminal and it thrown me this has helped so much ...
Good video, i would suggest to use the left hand side for neutrals and right hand side connector strips for earths and spread apart all the lives and switched lives for maintenance and troubleshooting purpposes seeing that you have so much space on the wiring centre, also looks tidier
Very good video. Perfect. I have 3 zones,3 valves, 2 heating zones and 1 hot water immersion. Could i put a nest controller putting the 2zones heating in the parallel in heating zone 2/3 and the hot water in the hot water terminals 5/6? Thank you
Great video mate well explained. I don’t suppose you have a wiring diagram for a combi with an invented cylinder do you? Two rads and kitchen on combi and rest of house heating and dhw from tank. Many thanks Tony
Hi I followed your video and wired and the S plan to a new wiring centre. However, after installing the nest, the internal boiler pump keeps running even when water and heating is satisfied. I have a system boiler with a water tank. I also noticed that with Vaillant programmer the water and heating indicator is not shown on the boiler unless it’s active but is permanently on for both. Any advice?
Good eye. It’s a mistake I realised I made when editing the video. I’m back there tomorrow to set up the app on the landlords phone, I’ll be rectifying it then
This is the best video I have seen of how to wire an S-plan heating system 👍
Ah thanks! Glad you enjoyed it 💪
I totally agree. Top vid
Really good.. 10way wiring centre+ best thing ever 🎉
Clearest video 100% thank you… so easy to understand like this.
Brilliant 👏🏾.. I have so much trouble with wiring . I only just getting my head round a wireless stat, I've had one main terminal and it thrown me this has helped so much ...
Great detail mate good to see you back so quick
Thanks for this video. It has helped me a lot. I will use this as a reference. Once again, many thanks.
Good video, i would suggest to use the left hand side for neutrals and right hand side connector strips for earths and spread apart all the lives and switched lives for maintenance and troubleshooting purpposes seeing that you have so much space on the wiring centre, also looks tidier
Thank you 👍 😊
A most fantastic job sir,well done.
Very clear and concise
Thanks for all your comments and support Stephen! Means a lot 👊
Brilliant video. Best on you tube
Thanks for everything great job . Easy explanation.
Please, if you can make a video how to wire underfloor heating
(Heatmiser)🎉🎉🎉
Thank you mate for the video. Very helpful.
Glad you enjoyed it!💪
Nice one again. Great explanations as usual.
Thank you!
I learned this from school before, so complicated...
Really good video mate and brilliantly explained 👍
Thanks Ryan!💪
Thank you great video!
💪
Well explained!
Very good video. Perfect.
I have 3 zones,3 valves, 2 heating zones and 1 hot water immersion.
Could i put a nest controller putting the 2zones heating in the parallel in heating zone 2/3 and the hot water in the hot water terminals 5/6?
Thank you
Thanks for sharing pal
Really good video!
Very useful thank you 👍🏻
Great video mate well explained. I don’t suppose you have a wiring diagram for a combi with an invented cylinder do you?
Two rads and kitchen on combi and rest of house heating and dhw from tank.
Many thanks
Tony
Good man. Thank you😊
Hey great vid. Have you got the hive system install guide?
Where would you put the pump wiring for the manifold on the Ufh ?
Where would you wire the pump for the underfloor heating?
Hi, what a great video! Where can I find the wiring diagram to print off? Thanks again and keep up the great work
hi there great video. I just have a question what thermostat can we use for the under floor heating a nest one or an analog thermostat?
Can you post wiring UFH manifold with this set up. Thanks
Hey up mate I can't find the wiring diagrams on your website?
Great Job! Is this similar to Hive wiring as well?
Very similar, just need to wire the hive side. I’ll have the cheat sheet uploaded for you on the 1st of Feb👍
Hi
I followed your video and wired and the S plan to a new wiring centre. However, after installing the nest, the internal boiler pump keeps running even when water and heating is satisfied. I have a system boiler with a water tank. I also noticed that with Vaillant programmer the water and heating indicator is not shown on the boiler unless it’s active but is permanently on for both.
Any advice?
I’m guessing you had to take the 24V link out? Confirm if I’m correct thank you.
I work along side a few electricians and if wiring centre to far away. They wire the 2 ports into the boiler
Why have you cut the Earth wire off to the cylinder stat when there is an earth terminal on both individual stats ?
Good eye. It’s a mistake I realised I made when editing the video. I’m back there tomorrow to set up the app on the landlords phone, I’ll be rectifying it then
please help me how to connect the nest power connector to the vaillant turbo tec plus boiler
Is there 3 core with black instead of blue
Good video I always hated the wiring side
Yeah wiring can be a pain!
Good video, but you should of used the grey as neutral not the black.
Don’t the boilers have pump over run
Winner
Can i send you a picture of what i have please?
Great video
Great work! Do you have a contact number?