Mastering Metal Engraving With The Glowforge: A Step-by-step Guide
HTML-код
- Опубликовано: 11 фев 2025
- Metal Engraving Spray: amzn.to/3h9LEva
Buy Glowforge: glowforge.pxf....
Bet you didn't know you could engrave metal! With a special spray, you are now able to engrave metal! Mind Blown! This tutorial shows you how to engrave metal and use the trace feature on the Glowforge.
Shop Cardstock: celebrationwar...
Make 6-Figures selling on Etsy: go.ashleefalco...
Shop Amazon Storefront: www.amazon.com...
Shop Cricut: cricut.pxf.io/...
Shop Laser Cutter: www.xtool.com/...
Shop Cheap Bulk Drinkware: Generic - www.saveacup.c...
Shop Best Vinyl & HTV: teckwrapcrafta...
📧 Let's Chat! hi@ashleefalco.com
📱 Follow me on instagram to see me daily in stories: bit.ly/3tMsxhM
🎵 Follow me on TikTok: bit.ly/3tMngXu
📌 Pinterest for all things crafting & recipes I love: bit.ly/3Dm5OMC
** Disclosure: This post may contain affiliate links, meaning I get a commission if you decide to make a purchase through my links, at no cost to you
#enravingmetal #glowforgetutorial #glowforge
Great video. If you do a lot of metal engraving, there's a spray called Dry Moly Lube that can be used when marking metal and it's so much more affordable, I bought a can off of Amazon for $10.
I have heard about Dry Moly, but I also heard that it's don't good to laser (because the chemicals it releases). not sure how true that is, just have heard that.
I am attempting to cover up previous engraved writing on a tablet. I've tried several attempt without success. Any advice?
I don't know if you're going to be able to unless you are doing a new engraving that is larger than the original (like a tattoo cover up)
Can you make a video showing how to engrave on the bracelet you made with your husband and son name?
i could but it would be for an xtool laser. I no longer have a glowforge.
Any suggestions on why once I rinse off the metal marking. My entire design wipes off, so I'm stuck with a blank again 🥺
2 things: did you peel off the plastic protector piece? I’ve done that before, it’s thin & clear and easy to miss.
Second: if you have taken the plastic off, try more power/less speed
does this only work with the Plus?
Nope - will work on all models ❤️
Would this work for belt buckles too?
I don't see why it wouldn't. I would always test the material in a small area before committing to a full design.
Would just covering the metal with vinyl work?
You totally could put vinyl on metal - but it won’t be permanent
@@ashleefalco I mean to cover it for cutting... instead of spraying it.
ah no. The spray has some sort of reaction to the metal vinyl wouldn't do it. Also - lasering any vinyl is very very bad for you and your machine.
@@ashleefalcoFinally laser safe vinyl!