Singer Featherweight Tutorial - Remove needle bar and presser bar
HTML-код
- Опубликовано: 22 ноя 2022
- Learn how to remove the needle bar, presser bar and tension pin releasing lever on your Singer Featherweight 221. This is part 2 of the video series, if you missed part one, check it out here: • Singer Featherweight T...
Here is the video that shows you how to reinstall the needle bar:
• How to install the thr...
Here is the video that shows you how to reinstall the presser bar:
• How to install feed do...
Learn more about Sewing Machine Rehab at: www.sewingmachinerehab.com
Look below for links to most of the products you will need:
Shop the Singer Featherweight Shop for some supplies you need: singer-featherweight.com/?aff=57
I sell grease wicks for your Featherweight on my site! Here is where you can find them: sewingmachinerehab.com/shop/o...
List of supplies and links:
Various sized flat head screw drivers such as...
Chapman screwdrivers Kit No. 9600: amzn.to/47R4n7N
Craftsman Ratcheting Offset Screwdriver: amzn.to/3Ehii9o
Penetrating oil, I love Aerokroil by Kano: amzn.to/3R1a25h
Lily White Sewing Machine Oil: amzn.to/3Ej1O0F
Sew-Retro Sewing Machine Grease: singer-featherweight.com/prod...
91% Isopropyl Alcohol: amzn.to/45tO7rv
Zymol Cleaner Wax: amzn.to/3P05c5o
Krud Kutter: amzn.to/3Ek2inh
Krud Kutter - The Must for Rust: amzn.to/3R2lKfR
Regular Cotton Swabs: amzn.to/3YW22nS
Pointy Cotton Swabs: amzn.to/3ECINXn
Old cotton t-shirts cut into pieces or other rags
Blue shop towels: amzn.to/45yO2D6
Sandwich bags (to keep parts together)
New Bed cushions for your Featherweight:singer-featherweight.com/prod...
New Featherweight Drip Pad: singer-featherweight.com/prod...
New LED lightbulb for your Featherweight: singer-featherweight.com/prod...
New belt for your Featherweight: singer-featherweight.com/prod...
New electronic style foot control: amzn.to/45tsNCH Feeler gauge: amzn.to/3YZJbbq
Thread tension meter: singer-featherweight.com/prod...
Tweezers: amzn.to/45Os7r7
Several small artist paint brushes and a 1" chip brush (you can buy on Amazon but they are cheaper at stores like Walmart and Harbor Freight)
*As an Amazon Associate I earn from qualifying purchases
**As an Featherweight Shop Associate I earn from qualifying purchases
![*SUPER RARE* THE PARADIGM IS BACK?!?!? Fortnite Item Shop [August 6th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/ru6xSH1RaPw/mqdefault.jpg)
Your videos are excellent. I love the detail and in-depth exploration. Not an easy task to take these apart, bravo! So nice of you to teach us all. We needed this. Subscribed!
Thank you! I really enjoy what I do, it never feels like work. Thanks again!
Thank you for the time and effort you put into this series. You have tremendous talent to make the complex seem simple.
Thank you! I’m happy to share what I know!
New Sub Here - Best Vidyas. Patient, slow, easy to follow and extremely thorough.
Thank you!
Fantastic video Jen. Thank you for doing this series. I will be watching the vids quite a few times lol. I can't start doing mine until I get caught up on the holiday projects that I already started. I want to take my time with them and not have to be hurried. My 70 year old eyes really appreciate the time you take in doing these and all the close ups in the vids. Hope you and your family have a blessed Thanksgiving and holiday season.
Thank you! Hope your Thanksgiving was lovely as well. I actually have two Featherweights that I am working on at once, my poor sewing room is a disaster right now! Hopefully I can get it organized enough to make the kids their Christmas pajamas. Blessings!
Lovely explanation and demonstration - thank you! (I especially love seeing the difficult bits and things that don't just happen "like in the textbook" - in real life that's the kind of thing we have to deal with so I like all the tips I can get on how to get past those sticking points.) :-)
Megan, I just shot the video for removing the light and wiring yesterday, such a messy job! Praying I captured the idea well enough on film because that is one lesson that I don't want to have to film again, haha. I am scared to watch it right now but I will have it posted soon, real life moments and all. :)
I'm so excited! My boyfriend got me a featherweight for Christmas and I'm so excited to restore it and make something with it. Thank you for the videos. I would be so lost at where to begin
What a great Christmas present! You will love sewing with it. Glad you are following along :)
@@SewingMachineRehab he didn't even know how good he did. A friend sold it to him at a good price (probably didn't know what they had) and he got it because he knows I like old sewing machines. When I flipped out he asked "is it a good one?" I might have cried. He's a keeper for sure.
Loving your videos. I am currently working on one as well. I appreciate your sharing of knowledge. Thanks.
Good luck with your restoration!
Great job Jen!
Thank you Bob! Happy Thanksgiving!
Hello Jen, thank you for all of your videos. My presser bar just wouldn't budge. Hubby and I used a lot of lubrication and the paint brush (with the clipped bristles) up against the end of the bar, he then positioned a screwdriver against the wooden handle and tapped with another screwdriver to get the bar to move.
Hi again! Yes, sometimes a stuck presser bar needs a few taps break it free. Sounds like you took the right approach, good job! Hopefully you were able to get it completely out and continue with your restoration. :)
The 'line' on the needle bar is commonly referred to as a "witness mark". Great video!
That is something I haven't heard yet, but makes total sense! Thanks for sharing!
Thank you !!! I love my featherweights
Me tooooo! You are welcome!
Hello, how can I repair the metal base/front of my FW221? Bought it from friend and didn't realize there is a "gash" in the metal base; have tried to reach local FW "exert" (he's really busy and good) but figure there must be some bondo or other material I can use to repair this. Love these tutorials, learning so much; bought update/refurb kit from authorized dealer and will tackle serious internal cleaning, replacing motor/foot control, so to find you is a blessed surprise. Thank you for sharing.
Hi! I haven’t had to make a repair like that yet so I can’t recommend anything. I would suggest taking it to a local body shop, they may have some good advice. It may need paint to cover up the repair depending on where it is and how bad it is….
Can you point me to the video where you adjust and put the presser bar/foot back together and adjust the setting foot height? Thank you!
Hi! That video is coming, this series is still in the making. It won’t be long though!
Boa tarde. Você vende estas máquinas? Eu gostaria muito de ter uma belezura destas😢Eu sou do Brasil, Amazonas, Manaus. Parabéns pelo velo e delicado trabalho.💖👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Hi! Yes, I do sell them. I do not ship internationally often though. Are they hard to find there?
how to change the belt
How to set needle geam
Hi, I don't understand your question, did you mean how to set needle height? I show that on the video that shows how to reinstall it later in this series. Hope you found what you were looking for!
Where do you buy the rubber tipped pliers?
Hi! They have different sized on Amazon, here is a link to one I use all the time: amzn.to/44wRkqB I hope that helps!
Will these tutorials work for the 222as well?
Hi! The differences between the 221 and the 222 are pretty extensive in my opinion. There may be a few videos that would apply but overall the inner workings of the two machines are very different. I would love to have a 222 to film some videos with but have yet to get my hands on one!
how far out should the needle be from the hook mine seems 2 far away to form a stitch
Usually when that happens the needle is not installed correctly. Make sure the flat side is pointing toward the bed extension. Let me know if that wasn't the problem!
Would WD-40 be an acceptable penetrating lubricant?
Hi! You can try it but it’s admittedly not my favorite. If you are able to get Kroil, it is the best and breaking down old dry oil and gunk and it doesn’t hurt the finish of the black machines. I know there are some others out there but once I found something that worked like Kroil does I stopped trying others.
Help! I cannot remove my needle bar clamp screw. I’ve sprayed in many, many times. Put the machine on the wheel for more pressure and a slight tap and nothing wants to budge. Any other ideas are greatly appreciated.
Hello! I may be a little late answering this and hopefully you have gotten the screw loose by now...I would keep the machine on its hand wheel end and keep spraying the screw. The kind of oil you use really does make a difference, WD-40 may not get the job done. I'd love to know if you were able to get it out, you never know which screw is going to give you a headache.
@@SewingMachineRehab love the last sentence as so far it’s only still this screw. Aerokroil is coming tomorrow and will follow your suggestion with it. I also ordered a Chapman set and it’s coming Friday. Fingers crossed. Will keep you posted.