Finally you are the first to show how to put that bracket connected to the aluminum floor out of Al the video s on your you are the only one to show exactly by lifting up the aluminum floor amd showing best video yet
Great video. its worth mentioning that the difference between 0.9mm and 1.2mm is alot of extra weight over the whole boat, but the extra wear patches are a great idea.
Good point. We'll be taking it out on the Arkansas river this weekend near Salida, Colorado, and since the river is low, we'll see how irritated we get if we have to drag the raft over a lot of rocks. To bad part of the weight in the boat will be me. It's time to lose more weight.
I have the 3.8 and have a Mercury 25HP 2 Stroke. Also have installed an under deck bilge and also use a Simrad GO 9 XSE - Live in Sydney, Australia. Also added a Bimini, and also have a lithium battery box, and Victron MPPT, and a RENOGY 170W solar panel on top of Bimini.....Great boat so far.....
I have the 16ft. I put a 20hp 4 stroke Merc on it. Can do 33mph solo. Very important to inflate the boat and keel properly to achieve smooth ride and planing. Also it's worth mentioning those side panel supports are a huge pain putting on.
Thanks for the comment. I agree, that installing the side panels are a major pain, but we have gotten better at putting them on now, plus it's easier with two people. Thanks for leaving a comment, including the speed you're able to get. Rick
Mike has really taken care of it and other then a few scratches on the bottom, due to our Arkansas River float trip in Colorado last year, it's held up great. We're taking it back out to SW Colorado at the end of July and expect no problems. We'll have an updated video of that fishing trip so everyone can see the shape it's in. Rick
Mike and I have been out twice here in Colorado during the summer on warm sunny days and the surface does not get hot, at least not that I have realized. Rick
I apologize for the late reply. I have helped set up the boat many times but I don't remember how many attachment points there are. I have sent an email to Mike and will let you know shortly. Rick
We do still use the boat but we split the time now between it and our kayaks. The boat is holding up extremely well. Mike has been really happy with it. Let us know if you have any other questions. Rick
Glad we could help. The floor is a little challenging but Mike and I have gotten a lot better at installing the floor. The more you put it together and take it apart, the easier it gets. Rick
Looks like a great boat, especially for the money. My only problem with any of these inflatables is the fact that you assemble and disassemble. This gets to be a PITA, especially the deflating after your done. Now you have a wet boat attracting sand and dirt and you're trying to deflate it enough to go back in the bag. I'm sure the process quickens with familiarity, but for me, this old adage will prevail. "The easier something is to do or use, the more often you will do it or use it". I would build this boat once and leave it that way on a trailer. I would take the motor off, but that is about it. I would take the floor out a couple of times a year to clean and/or let dry, but the constant set up and tear down would turn me off pretty quickly. I'm thinking about going this route, but an electric pump is a must. Thanks for the video. Hope you are enjoying it.
I agree with you about inflating the raft and leaving it that way, at least for the summer, and transporting it on a trailer. I have given my opinion to Mike several times but it's more convenient for him to not pull a trailer and break it down after each use. I will say that the setup and breakdown is a lot easier then I expected it to be, especially if you have two people. We appreciate your comments and opinions. Thanks, Rick
Yes good points but these are a great options for people who do not have storage or don't own a house on a land. Myself I'm a Condo owner so this is the closest thing I can get to a boat. Easy to pack. 20-30 mins max which is ok. For me I go fishing so I don't mind putting it together it as long as I don't fish from the shore anymore :) Cheers
Is the transom 1 peice welded aluminum like a stryker inflatable boat? And what is the height of the transom? Been looking over a few brands, the stryker pro has full coverage on the bottom for abrasion protection, a 20 inch transom as compared to a 15 inch, these are things that i am willing to pay for when making the investment. The only thing i noticed was that to make 1st assembly easier, they recommend to inflate the boat and leave it sit for 24 hrs, then deflate partially and put everything else into it, but not absolutely essential.
I apologize for the late reply. I'll send your questions on to Mike, but I do know the Transom is not welded aluminum. I'll respond back here when Mike sends his comments. Rick
Mike is the one who bought the boat and he has had no trouble with customer service. One piece had a small crack on the front floor piece but they replaced it and he had a new one with two or three days. We have had the boat out on several lakes and the Arkansas River here in Colorado and have been beating it up but it's still holding up strong. We cracked an oar on the river but BRIS replaced it free of charge. We're taking the boat back out this coming week near Telluride, Colorado for our last trout fishing trip of the year and we know some ice is forming around the edges of the lake so this will be a good cold weather test. I'll let you know after the trip how it did in the cold weather and lake. We may have to break some ice to get away from the shore line but most of the lake is still ice free. Rick
I am thinking to purchase the exact same boat. Can you tell me how is it holding within the last three or four years you have had it? Any issues or regrets
We have had the boat out on rivers with a lot of rocks and hitting bottom a lot, and on a lot of lakes. It is holding up really well. We cracked an oar once, but BRIS sent a replacement within a week. There are some things we want to add to the boat, such as better seats, but we have been extremely happy with the boat and BRIS has been really responsive when we needed something replaced. Let us know if you have any other questions. Rick
@MikenRickOutdoors Thanks, I was trying to purchase and read some reviews that the seams and handles are falling apart within 2 years and that it was a piece of crap. So that scared us off. I guess will put the pin and purchase the Bris 470
I got mine like two weeks ago, it's a real pain on the neck to set up this boat. Fabric is really tight and heavy ( one of the reasons that influence my decision of buying one). I didn't put it on the water yet but I hope to be able to do it this week. I hope it lasts!
Hey Carlos. You're right, the first time you set it up it takes a lot longer, especially when separating the seams between the side tubes and the flooring, and then getting the floor put in is also a pain. However, after the first time, the following setups have been easier for Mike and I. The boat is holding up extremely well for us, even when we hit a lot of rocks on the bottom of the boat when we floated the Arkansas River north of Salina, Colorado last year. The water was really low and we were the only guys on the river that were stupid enough to try it, but the boat handled it well, even with a few nice scrapes on the bottom, it's still holding up well. Rick
@@mikenrickoutdoors Hi Mike , I have to Tell you something, toughness is the main reason because I bought this one. I know that at the moment, this boat is the only one that is using that pvc fabric thickness on inflatables ,so, my only hope is that the quality of the fabric is high. On the other side one of the big cons on this one is that is heavy an not easy to be handled by one person. Thanks for your video is really informative and let me tell you, after seeing your video , I feel better knowing that I made the right decision. I am hoping to put it on the water probably tomorrow with a 9.9hp four stroke tohatsu (another pain on the neck to carry.... Omg, I really like suffering!)
Mike bought transom wheels and attached to the back of the boat so it's easier to move around. You can see what he bought and how he attached them in this link. ruclips.net/video/G0by9dWjC0s/видео.html. Let us know how you like using it and if you have any questions. I'll let Mike know you've bought one and have him respond to you if you have questions. Rick
Glad it was helpful! We just finished floating part of the Arkansas river north of Salida, Colorado. The river was extremely low, the rafting was technical and we ran over a lot of rocks and bumped into many more. The BRIS boat held up great and we'll be posting that review later this week.
I have the same boat (in 10.8ft). To get the floor in easily only very little air should be in the tubes. If the beams are in you can always reposition the floor al little. Finally the floor will adjust itself if the tubes are filled up. 1.2 mm ads at least 8 kg of extra weight to the boat. The next time i go for a 0.9 mm. Just as strong and good.
Great video guys. Question; now that it's been a year + How is this boat holding up. I'm thinking of buying one, but, I would like to know how you feel. Would you buy another or get something else. I'm a new subscriber here from Northern Ontario Canada. Cheers.
Thanks for subscribing. We're taking the boat out again this coming week in Colorado for a week long fishing trip and Mike just bought an 18 h.p. motor to get us around the lake faster. The boat has held up extremely well and Mike is really happy with it. We'll have some more reviews of it soon after we get back from this fishing trip. Rick
@@mikenrickoutdoors I would like to get some thing of equal or higher quality for fishing with my son. I am hesitant to buy an inflate-able cause kids are kinda famous for hooking random stuff. Have you had any hook vs tube incidents? Thanks for the video!
You are correct. It can be a challenge loading and unloading it into your vehicle if you set it up and break it down often. Mike bought some transom wheels he attached to the back of the boat that makes it a lot easier to maneuver around when it's inflated.
Mike may take you up on that after our last fishing trip to SW Colorado using the fishing kayaks. We both enjoyed the kayaks much more than the rubber raft. There's always a time and place for each of these but I'll pass your request along. Rick
Poor quayity fabric.. postage stamp glue... weetbix ply transom.. definate use by date not specified but i've binned plenty of 'em less than 2 years old... buyer beware... !!
We understand that BRIS Boat is not the highest quality rubber raft on the market. It's Mike's first inflatable boat. The size and price, plus the thickness of the material on the bottom was what influenced him to buy this one. The BRIS boat has held up well so far, but we'll keep watching for problems and let our readers know if and when they do show up so people can make an informed decision if they decide to buy an inflatable boat. Thanks for leaving a comment with your opinion and experience with BRIS Boat. Thanks, Rick
Bris boats look good. However in my experience, gained by wat of a lot of grief, I am of the opinion that they do not stand behind their product if there is a problem..... and that they use deceptive practices to avoid warranty work. From day one the boat I bought had a leak.... they strung me along and avoided me until the warranty period was over. Then then offered to sell be new again. I am of the impression one should stay far away from Bris. All aforementioned is my sole opinion of course.
It's good to hear about other people's experiences, but Mike has not had the same experience. Every issues he has had, and there have only been two that I recall, has been dealt with quickly by BRIS and they have sent him new parts within the week. Thanks for sharing your experience. Rick
We back truck close to where we want to put it in the water and then carry it a short distance. Of course it's better with two people, but even then we don't carry it very far. Dragging the bag also works, but it's only for a short distance. Sometimes we'll leave the bag on the trailer and pull everything out individually. Tell us what your experience has been. Rick
We live in bigger world then the USA, and when a product is made oversees and their specs list things in metric then we'll talk about in those measurements, rather then pulling out my calculator and converting it for you. Rick
Personally, after using metric in college, I am a big fan of it. The engineering community in the U.S. was close to changing over to metric many years back and it was the construction industry that shut it down. These decisions on units are above my pay grade, but I'm good with using whatever is chosen. Rick
Here's a Great Hunting Video You Will Enjoy: ruclips.net/video/nZ0igoAh__g/видео.html
Thank you for linking to the video.
Rick
Finally you are the first to show how to put that bracket connected to the aluminum floor out of Al the video s on your you are the only one to show exactly by lifting up the aluminum floor amd showing best video yet
Thank you for the thumbs up. Much appreciated.
Rick
Great video. its worth mentioning that the difference between 0.9mm and 1.2mm is alot of extra weight over the whole boat, but the extra wear patches are a great idea.
Good point. We'll be taking it out on the Arkansas river this weekend near Salida, Colorado, and since the river is low, we'll see how irritated we get if we have to drag the raft over a lot of rocks. To bad part of the weight in the boat will be me. It's time to lose more weight.
I have the 3.8 and have a Mercury 25HP 2 Stroke. Also have installed an under deck bilge and also use a Simrad GO 9 XSE - Live in Sydney, Australia. Also added a Bimini, and also have a lithium battery box, and Victron MPPT, and a RENOGY 170W solar panel on top of Bimini.....Great boat so far.....
Thanks for letting us know you like it and the things you're adding to it.
I have the 16ft. I put a 20hp 4 stroke Merc on it. Can do 33mph solo. Very important to inflate the boat and keel properly to achieve smooth ride and planing. Also it's worth mentioning those side panel supports are a huge pain putting on.
Thanks for the comment. I agree, that installing the side panels are a major pain, but we have gotten better at putting them on now, plus it's easier with two people. Thanks for leaving a comment, including the speed you're able to get.
Rick
Lol... The cat hanging out with dad and the dogs...
Yep, that's what happens when the kids have all left the house and you need some company.
Rick
Love your pets. Cool that cat is friends with the dogs.
That cat also likes to travel with Mike when he stays in his RV. The cat likes dogs better then people.
Rick
How has this boat hold up after year of use
Mike has really taken care of it and other then a few scratches on the bottom, due to our Arkansas River float trip in Colorado last year, it's held up great. We're taking it back out to SW Colorado at the end of July and expect no problems. We'll have an updated video of that fishing trip so everyone can see the shape it's in.
Rick
How hot to the touch does that black get when out in the summer?
Mike and I have been out twice here in Colorado during the summer on warm sunny days and the surface does not get hot, at least not that I have realized.
Rick
How many places is the keel attached? One or two or three?
I apologize for the late reply. I have helped set up the boat many times but I don't remember how many attachment points there are. I have sent an email to Mike and will let you know shortly.
Rick
May I ask if you are still using the boat? can you hold up?
We do still use the boat but we split the time now between it and our kayaks. The boat is holding up extremely well. Mike has been really happy with it.
Let us know if you have any other questions.
Rick
Thanks for this, it definitely helped me decide to purchase and helped put it together. That floor could be a problem!
Glad we could help.
The floor is a little challenging but Mike and I have gotten a lot better at installing the floor. The more you put it together and take it apart, the easier it gets.
Rick
Looks like a great boat, especially for the money. My only problem with any of these inflatables is the fact that you assemble and disassemble. This gets to be a PITA, especially the deflating after your done. Now you have a wet boat attracting sand and dirt and you're trying to deflate it enough to go back in the bag. I'm sure the process quickens with familiarity, but for me, this old adage will prevail. "The easier something is to do or use, the more often you will do it or use it". I would build this boat once and leave it that way on a trailer. I would take the motor off, but that is about it. I would take the floor out a couple of times a year to clean and/or let dry, but the constant set up and tear down would turn me off pretty quickly. I'm thinking about going this route, but an electric pump is a must. Thanks for the video. Hope you are enjoying it.
I agree with you about inflating the raft and leaving it that way, at least for the summer, and transporting it on a trailer. I have given my opinion to Mike several times but it's more convenient for him to not pull a trailer and break it down after each use. I will say that the setup and breakdown is a lot easier then I expected it to be, especially if you have two people. We appreciate your comments and opinions. Thanks,
Rick
Yes good points but these are a great options for people who do not have storage or don't own a house on a land. Myself I'm a Condo owner so this is the closest thing I can get to a boat. Easy to pack. 20-30 mins max which is ok. For me I go fishing so I don't mind putting it together it as long as I don't fish from the shore anymore :) Cheers
Is the transom 1 peice welded aluminum like a stryker inflatable boat? And what is the height of the transom? Been looking over a few brands, the stryker pro has full coverage on the bottom for abrasion protection, a 20 inch transom as compared to a 15 inch, these are things that i am willing to pay for when making the investment. The only thing i noticed was that to make 1st assembly easier, they recommend to inflate the boat and leave it sit for 24 hrs, then deflate partially and put everything else into it, but not absolutely essential.
I apologize for the late reply. I'll send your questions on to Mike, but I do know the Transom is not welded aluminum.
I'll respond back here when Mike sends his comments.
Rick
Does it have a keel?
Yes, it does have a keel and mike has attached both the transom wheels to it and a trolling motor.
Rick
This reminds me of my boat mariner 4
Awesome! I hope this is a good thing.
Rick
Very detailed . Thanks
Glad it was helpful!
Rick
Hi,did you have any issues with your boat how was your experience with the Bris customer service? Thanks
Mike is the one who bought the boat and he has had no trouble with customer service. One piece had a small crack on the front floor piece but they replaced it and he had a new one with two or three days. We have had the boat out on several lakes and the Arkansas River here in Colorado and have been beating it up but it's still holding up strong. We cracked an oar on the river but BRIS replaced it free of charge. We're taking the boat back out this coming week near Telluride, Colorado for our last trout fishing trip of the year and we know some ice is forming around the edges of the lake so this will be a good cold weather test. I'll let you know after the trip how it did in the cold weather and lake. We may have to break some ice to get away from the shore line but most of the lake is still ice free.
Rick
Hey Mr. Rick is this the only color they have for the Fish Hunter?
Mike wanted a different color but as of the time he purchased it, black was the only color.
Rick
good looking boat. I think everything should be installed when boat is flat
Thanks for the comment. The boat is working great so far but we want to add better seats and longer oars to make it feel and operate better.
Rick
I am thinking to purchase the exact same boat. Can you tell me how is it holding within the last three or four years you have had it? Any issues or regrets
We have had the boat out on rivers with a lot of rocks and hitting bottom a lot, and on a lot of lakes. It is holding up really well. We cracked an oar once, but BRIS sent a replacement within a week. There are some things we want to add to the boat, such as better seats, but we have been extremely happy with the boat and BRIS has been really responsive when we needed something replaced.
Let us know if you have any other questions.
Rick
@MikenRickOutdoors
Thanks, I was trying to purchase and read some reviews that the seams and handles are falling apart within 2 years and that it was a piece of crap. So that scared us off. I guess will put the pin and purchase the Bris 470
We have not seen those issues with Mike's BRIS boat. Let us know how you like it when you try it out.
Rick
Cool little boat
Thanks. It has worked really well so far on the rivers and lakes we have taken it out on.
Rick
I got mine like two weeks ago, it's a real pain on the neck to set up this boat. Fabric is really tight and heavy ( one of the reasons that influence my decision of buying one). I didn't put it on the water yet but I hope to be able to do it this week. I hope it lasts!
Hey Carlos. You're right, the first time you set it up it takes a lot longer, especially when separating the seams between the side tubes and the flooring, and then getting the floor put in is also a pain. However, after the first time, the following setups have been easier for Mike and I. The boat is holding up extremely well for us, even when we hit a lot of rocks on the bottom of the boat when we floated the Arkansas River north of Salina, Colorado last year. The water was really low and we were the only guys on the river that were stupid enough to try it, but the boat handled it well, even with a few nice scrapes on the bottom, it's still holding up well.
Rick
@@mikenrickoutdoors Hi Mike , I have to Tell you something, toughness is the main reason because I bought this one. I know that at the moment, this boat is the only one that is using that pvc fabric thickness on inflatables ,so, my only hope is that the quality of the fabric is high. On the other side one of the big cons on this one is that is heavy an not easy to be handled by one person. Thanks for your video is really informative and let me tell you, after seeing your video , I feel better knowing that I made the right decision. I am hoping to put it on the water probably tomorrow with a 9.9hp four stroke tohatsu (another pain on the neck to carry.... Omg, I really like suffering!)
Mike bought transom wheels and attached to the back of the boat so it's easier to move around. You can see what he bought and how he attached them in this link. ruclips.net/video/G0by9dWjC0s/видео.html. Let us know how you like using it and if you have any questions. I'll let Mike know you've bought one and have him respond to you if you have questions.
Rick
Thanks for sharing this video kind regards
Thanks for visiting our site.
Rick
Great review, thanks
Glad it was helpful! We just finished floating part of the Arkansas river north of Salida, Colorado. The river was extremely low, the rafting was technical and we ran over a lot of rocks and bumped into many more. The BRIS boat held up great and we'll be posting that review later this week.
I have the same boat (in 10.8ft). To get the floor in easily only very little air should be in the tubes. If the beams are in you can always reposition the floor al little. Finally the floor will adjust itself if the tubes are filled up. 1.2 mm ads at least 8 kg of extra weight to the boat. The next time i go for a 0.9 mm. Just as strong and good.
Thanks for letting us know and what your preference is. It has been a great boat for Mike and is still holding up well.
Thanks,
Rick
1.2 mm is going to add a lot more than 8kg. but 1.2 is going to be a lot stronger than .9
How long would you say it takes to set up from start to finish?
Hey Cody. With 2 people it takes about 15 minutes at the fastest. It's more like 20 to 30 minutes for one person, depending on how fast you are.
Rick
Great video guys. Question; now that it's been a year + How is this boat holding up. I'm thinking of buying one, but, I would like to know how you feel. Would you buy another or get something else. I'm a new subscriber here from Northern Ontario Canada. Cheers.
Thanks for subscribing.
We're taking the boat out again this coming week in Colorado for a week long fishing trip and Mike just bought an 18 h.p. motor to get us around the lake faster.
The boat has held up extremely well and Mike is really happy with it. We'll have some more reviews of it soon after we get back from this fishing trip.
Rick
@@mikenrickoutdoors Thanks Rick. Looking forward to seeing your upcoming trip and review.
@@mikenrickoutdoors I would like to get some thing of equal or higher quality for fishing with my son. I am hesitant to buy an inflate-able cause kids are kinda famous for hooking random stuff.
Have you had any hook vs tube incidents?
Thanks for the video!
Mike and I fish a lot from the boat and there have been no snagging issues or tube incidents. Mike has been very happy with the boat.
Rick
@@mikenrickoutdoors Thanks.
Have the same boat and its really heavy.
You are correct. It can be a challenge loading and unloading it into your vehicle if you set it up and break it down often. Mike bought some transom wheels he attached to the back of the boat that makes it a lot easier to maneuver around when it's inflated.
Awesome 👌 black beauty 😍
Thanks! it may not be the top of the line inflatable raft, but for the money, it is a great boat.
Rick
Excelent video .
Thanks for the thumbs up.
Rick
Great video
Thanks! I'll pass your compliment along to Mike.
Rick
Thanks
Glad to help.
Rick
Nice looking boat and you can send it my way if you would like to. Thank you for taking time to show us your boat 🛥. JOHN E.MAY ❤❤❤
Mike may take you up on that after our last fishing trip to SW Colorado using the fishing kayaks. We both enjoyed the kayaks much more than the rubber raft.
There's always a time and place for each of these but I'll pass your request along.
Rick
Awesome video mate need some wisdom when your a young fella like me!
Glad we could help. We have used this boat a lot over the last two years and it keeps holding up well.
Rick
Register your boat? And you guys think that we're weird? (Brit)
LOL. I don't think you're weird. There are plenty of laws here in the U.S. that should keep us from giving other people grief.
Rick
Poor quayity fabric.. postage stamp glue... weetbix ply transom.. definate use by date not specified but i've binned plenty of 'em less than 2 years old... buyer beware... !!
We understand that BRIS Boat is not the highest quality rubber raft on the market. It's Mike's first inflatable boat. The size and price, plus the thickness of the material on the bottom was what influenced him to buy this one. The BRIS boat has held up well so far, but we'll keep watching for problems and let our readers know if and when they do show up so people can make an informed decision if they decide to buy an inflatable boat. Thanks for leaving a comment with your opinion and experience with BRIS Boat.
Thanks, Rick
Bris boats look good. However in my experience, gained by wat of a lot of grief, I am of the opinion that they do not stand behind their product if there is a problem..... and that they use deceptive practices to avoid warranty work. From day one the boat I bought had a leak.... they strung me along and avoided me until the warranty period was over. Then then offered to sell be new again. I am of the impression one should stay far away from Bris. All aforementioned is my sole opinion of course.
It's good to hear about other people's experiences, but Mike has not had the same experience.
Every issues he has had, and there have only been two that I recall, has been dealt with quickly by BRIS and they have sent him new parts within the week.
Thanks for sharing your experience.
Rick
You aren't going to carry that bag; ask me how I know...
We back truck close to where we want to put it in the water and then carry it a short distance. Of course it's better with two people, but even then we don't carry it very far. Dragging the bag also works, but it's only for a short distance.
Sometimes we'll leave the bag on the trailer and pull everything out individually.
Tell us what your experience has been.
Rick
Why in the hell do people from the US talk in meters in millimeters inches and feet dude inches and feet what the f man 😎😖😁
We live in bigger world then the USA, and when a product is made oversees and their specs list things in metric then we'll talk about in those measurements, rather then pulling out my calculator and converting it for you.
Rick
that would then include you in the 4 percent that demand the "imperial" system. EVERYBODY else uses the metric.
Personally, after using metric in college, I am a big fan of it. The engineering community in the U.S. was close to changing over to metric many years back and it was the construction industry that shut it down.
These decisions on units are above my pay grade, but I'm good with using whatever is chosen.
Rick
I hate watching people open inflatable boats with exacto blades and knives.
Just sayin
Yah, that could end in trouble.
Rick
if the boat is well built it may not matter? :D