If I may make a suggestion, (not to take a way from your wonderful project) a way to be able to change at will the lights I would think you could use some clear plastic hosing to connect the two parts of wood. This would enable you to not only change the lights when one burnt out but it would do two other functions 1. Enable you to change the colors of the lighting if you get bored with one set, you could simple pull the wires out and replace at will. 1. When time to sand comes you wouldn't have to worry about scratching the led lighting at all as it would be safely inside the tubing. Just a couple of thoughts as I completed my resin clock a ways back and ran I to some interesting ideas myself
Very nice done, with one small remark. Why didn't you start the cable from behind the tap, then through the tap, through the water beam into the bowl? It is so much nicer to get rid of the cable instead of having it lying next to the bowl, visible for everyone.
very nice but I would of loved to of seen a nice piece of walnut attached to the tap and to the glass that would of looked Kool as well so it could be put anywhere rather than just against the wall.taking nothing away from your piece its Kool and imaginative well done sir I loved it
Идея классная, реализация тоже на уровне. Классное видео:) Один вопрос - как обстоят дела с перегревом светодиодов внутри эпоксидки? если оставить такой светильник на несколько часов включенным, не перегревается ли эпоксидка и не горят ли светодиоды из-за отсутствия теплоотвода?
*Vai waterfountain banane ka mera bahut dino se souk hai mager gher ke kaam se smy nahi milta, avi khali samay hai to banane gayi to sab mujhpe has rahe hsi, kahte hai ki thermacol pr cement permanently nahi raheha, plz bataye kya kewal Cement lagate hai ya khuch or v milate hai, plz hel*
Not necessarily. LEDs are typically 2.7 - 3.2 volts depending on colour and 40 LEDs on a 12v system would likely be made up of 10 parallel strings of 4 LEDs in series or similar.
Nice result, but it would have looked more realistic if you had left the bubbles in the resin, since there are lots of bubbles in the water that comes out of the tap. Also, I'm confused as to how you sealed the tap when pouring the resin into the tube. How come it didn't leak out of the end?
Really great work. I noticed you put the epoxy in the vacuum chamber before pouring the first time. Is that a slow setting epoxy? what kind? thank you.
This is SO cool!! I missed where you stashed the battery pack to turn the LED lights on and off though. Can you please enlighten me? Thanks! Love your work!!💕
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I'll bet your place is all sparkly everywhere.
Gorgeous!!!!!
Imagine that as a red flowing volcano light
Red leds
Red resin
Hmmmmmmmm ideas 💡 are endless
Very nice
I enjoyed the video
s
Вау!!!👍👍👍Парень ты мой герой 👏👏👏👏👏Просто великолепный светильник!
If you could get the fairy lights to "twinkle" quickly, I'm wondering if it would look like the water is actually flowing!
C'est juste superbe, magnifique bravo bravo 🇫🇷
Merci🙂
you are extremely talented!! I love your video and I never would of thought of that!!!
If I may make a suggestion, (not to take a way from your wonderful project) a way to be able to change at will the lights I would think you could use some clear plastic hosing to connect the two parts of wood. This would enable you to not only change the lights when one burnt out but it would do two other functions
1. Enable you to change the colors of the lighting if you get bored with one set, you could simple pull the wires out and replace at will.
1. When time to sand comes you wouldn't have to worry about scratching the led lighting at all as it would be safely inside the tubing.
Just a couple of thoughts as I completed my resin clock a ways back and ran I to some interesting ideas myself
Zzuuu
الماده الزرقاء ماهي ولماذا وضعت الازق الاسود ثم نزعته لم نفهم شيء
wow beautiful love that,well done
Thank you!
Fantastic💙💙💙💙💙💙
Easiest of all epoxy led lights.
Stunning result ♥️
Top… Wonderful 😉💪 a question … Are the LEDs wrapped in a silver paper core?
فنااااان😊ماشاء الله
Very nice done, with one small remark. Why didn't you start the cable from behind the tap, then through the tap, through the water beam into the bowl? It is so much nicer to get rid of the cable instead of having it lying next to the bowl, visible for everyone.
Very cool, I think you should have left the bubbles in the resin when you poured the bowl I think it would have given it an interesting look
Antes hací vendían unos grifos en los tianguis o en las nobedades que traian de china me gusto mucho su trabajo felicidades
عالی بود اقا رامون۰🤗
This night lamps real cool.
What did you wrap the lights around and did you get it to stay in place
Wow !
Impressive.
Looks great !
Great idea.
Fantastic 👍👀👍👍👍👍👍👌
J adore , c est magnifique .
very nice but I would of loved to of seen a nice piece of walnut attached to the tap and to the glass that would of looked Kool as well so it could be put anywhere rather than just against the wall.taking nothing away from your piece its Kool and imaginative well done sir I loved it
Amazing! You made it look doable! Thanks for sharing.
très beau.tu explique tellement bien !!!!
ما اسم هذه الماده المخبوطه هل هي صمغ ام ماذا
Can a jumbo straw be used instead of the clear film you used?
What a GREAT idea. Nice Job 👍
What did you put in the faucet so the resin wouldn't come out at the other end while you were poring it?
Brilliant very clever, it they could be bought I would purchase one, maybe a custom colour. Joy to watch, well done
Идея классная, реализация тоже на уровне. Классное видео:) Один вопрос - как обстоят дела с перегревом светодиодов внутри эпоксидки? если оставить такой светильник на несколько часов включенным, не перегревается ли эпоксидка и не горят ли светодиоды из-за отсутствия теплоотвода?
Включайте максимум на час.
Can you make diorama of under water buble in the resin.
That looks cool.Wouldn't be good to leave bubbles to make it appear more organic?
Thats exactly whag i said as well. Its amazing
@@diycreationsvet4878
Say *’whaq’??!!!*
:
السلام عليكم شنو هاي المادة بلزحمة الرد جميل جدا
*Vai waterfountain banane ka mera bahut dino se souk hai mager gher ke kaam se smy nahi milta, avi khali samay hai to banane gayi to sab mujhpe has rahe hsi, kahte hai ki thermacol pr cement permanently nahi raheha, plz bataye kya kewal Cement lagate hai ya khuch or v milate hai, plz hel*
I love your ideas. They look so awesome. Thank you for sharing.
How do you keep the epoxy from sticking to the plastic sheeting?
People tend to use tape it's easy to remove that way but the plastic if smooth enough should peel right off
Hola buenas tardes, me gustaria saber que le pusiste en el medio del chorro creado, fue un alambre ??..
That pretty cool.nice job 👍
El N' 1👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Где купить эту светящую проволоку?
Посмотрите в электро товарах.
muy bueno. ... quisiera saver como se prepara. ... a que porcentaje se mezcla?. ... gracias
That's cool
What happens if the lights burn out?
I’m curious do you ever sale any of the really neat lamps and other things or is this strictly for you and to show how these things can be made?
Bardzo dobra robota 👌👍
Dzięki :) !!!
This is really very original. Thanks for sharing.
Nyc idea and nyc background sound🤩 which one is it???
excelente esta fuente muy bella, cual es el material para hacer una, xfa MB Resin ArT
pretty cool, would be really neat if the lights were ran up the other way and the faucet valve was the on/off switch for the lights
and what if the lights stop working?
It gets dark.
:
Very beautiful ☺️
Thanks 👍
sehr aufwendiges Video
*КАК ВСЕГДА КЛАССНОЕ ВИДЕО. ИНТЕРЕСНО СМОТРЕТЬ. МОЛОДЕЦ 👍👍👍*
That's so cool!! What color ink did you use?
Blue
@@mbresinart it's just called blue?
@@py3323 GlassCast blue
www.glasscastresin.com/indigo-blue-epoxy-pigment
MUY BUENO, GRACIAS POR COMPARTIRLO, SALUDOS CORDIALES DESDE CUSCO PERU PARA EL MUNDO.
Thank you !!
Ficou magnífico. Muito bonito mesmo 🇧🇷
obrigado !
ممكن اعرف ايه هي الماده ال بتتخلط واللون حد يفهمنا ارجوكم ترجمه
المادة هي الريزين الشفاف مع اللون الساءل الذي يستعمل في الدهان
the technique is very good, the blue paste is a mixture of what?
That’s epoxy resin
Amazing work good job.....
Very innovative
bellissimo
Wow love this
Bellissima realizzazione,ben curata nei particolari e da un grandissimo effetto 👍👍👍👍🤝👋😃
grazie😃
@@mbresinart what is the name of the machine that you put the epoxy in the fast dry
Question to the author: how are the LEDs connected in the circuit? If one burns, why does the whole chain stop working? Right?
Not necessarily. LEDs are typically 2.7 - 3.2 volts depending on colour and 40 LEDs on a 12v system would likely be made up of 10 parallel strings of 4 LEDs in series or similar.
Very brilliant idea.
Es maravillosa la idea 👍🏼👍🏼👍🏼👏😃gracias por compartir .
Was ist das für eine Folie die du rollst für den Strahl aus dem Hahn?
Nice work
Love Love Love this!!!!!!!!!!😍
White or blue Leds ?
Nice result, but it would have looked more realistic if you had left the bubbles in the resin, since there are lots of bubbles in the water that comes out of the tap.
Also, I'm confused as to how you sealed the tap when pouring the resin into the tube. How come it didn't leak out of the end?
Tap was turned off at a guess.
Very beautiful, creative.
Gorgeous
I recognized the first tune from watching Hoof GP: It's "Looking to Paradise". Except on Hoof GP's videos, it contains words.
bhai es liqvid ka name kya h
hello friend, what kind of lamp is that you use in your projects ??
Keo màu xanh là keo gì thế ad
가지고 싶네요^^ 여름 인테리어 소품으로 쓰면 시원해 보일 듯~
What type of lights did you use
Running led sequence would have made it look alive as is if water tap is left open and no cup is filling
So special, I also try to do it
Really great work. I noticed you put the epoxy in the vacuum chamber before pouring the first time. Is that a slow setting epoxy?
what kind? thank you.
glass cast epoxy resin
That drink restores you +1000 of mana
You should do a beer can one or beer pump!
Qual os nomes deses matérias de uso?
Brilliant
This is really cool!
Amazing🤩🤩
This is SO cool!! I missed where you stashed the battery pack to turn the LED lights on and off though. Can you please enlighten me? Thanks! Love your work!!💕
This is USB LED lights
@@mbresinart how did you get them through the bowl? Enlighten me please
Linda essa torneira luminaria, amei!
Omg it is very very clever idea! I LOVE IT! Grat!🤝
Thanks 🙂
@@mbresinart the world thanks to share it!
GRAT!!!!
روعه وفن راقي جدا👍👍👍👍👍
Very beautiful, a work of art !!!)
Um dos mais belos trabalhos que vi... parabéns
Muito prático e legal pra decorações.
Wow this is so cool. I love making resin art and this gives me lots of new ideas. Thank you :-)
Thank you :-)
Muito inteligente a ideia
Keo ab hay keo uv vậy ad
So beautiful and wish I had one and it'd make a great night light.
Exactly my dear its very beautiful
Muito lindo parabéns 👍👏❤
🥰