Why is it no one is using a better neck design over the original mini bike junk? Bronze bushings are a step up from the metal against metal nut and long bolts as the bearing surface of the most important part of the chassis and does the work of handling the weight and steering. How much more would it take to use a tapered roller bearing??? It would be stronger and last much longer than the bolt on bushings situation. Otherwise the rest of your mini trikes are absolutely amazing and so cool looking brothers! I didn't mean anything disrespectful towards your builds but I'm just curious why outside of easy and less expensive to manufacture?
you should use a cv axle system in the back end so you have a true independent suspension setup on that little trike, that would give you a smoother ride.
I have a blokart that I am looking into making it eletric assist what would be the most affordable way to convert the rear into its own eletric axle power? Figured it would be a cool idea to have wind powered by sail and eletric to get it to the locations, or use both wind and eletric while useing on the coast.
On the black electric trike they use Unilli 12x9.00-6 and the treaded tires are a Burris 12x8.00-6. I do not know what rim they use or how to even figure that out.
That is a terrible location for the intake, I'm not sure you could have put it on a worse spot, and for what these things cost you'd think there would be a better design.
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Stout looking build, sweet. Wheelie bar too.
Thanks chuck!
I definitely want both the gas and electric now 😍😍
Do they sell these frames? I’d love to put one together.
I’m think they do on the website
Love how the video was filmed similar to a hoonigan gymkhana style video
You are right, I want one and have not even finished the video yet.
I believe that's the cleanest trike I've ever scene !!!
Great job!!!
Allsome work guys from cruzermans inventions 😁👍🌟🎉
I like the more informative and “serious” video. Also lmk when you guys are ready to let go of this thing
Dude same. I’m ready to buy one
Thanks for the frame build!
That just looks ultra super
I couldn't watch more than 3 minutes due to getting motion sickness from the jerky camera movements and all that zooming in and out
With all due respect, and I do mean with all due respect. I had no idea you had experimental surgery to get your balls removed.
Like how he says we do this we done that but only one guy working 😆
Calling out the camera man I see 😂
Where can I buy one
what size round tubing are you using for the backbone and what size tubing for the rest of the trike? it looks pretty thick.
Awesome any plans how about putting a 125cc lifan semiauto love to build a trike like yours.
Are you building these to sell? I would really like one.
I rly wanna build one myself this summer. Do you have any CAD files or some sort of plan with all the dimensions? Agin, I rly rly wanna build one.
Хорошее дело делаете парни, прекрасные моцик,мини
Good cliffhanger.
Why is it no one is using a better neck design over the original mini bike junk? Bronze bushings are a step up from the metal against metal nut and long bolts as the bearing surface of the most important part of the chassis and does the work of handling the weight and steering. How much more would it take to use a tapered roller bearing??? It would be stronger and last much longer than the bolt on bushings situation. Otherwise the rest of your mini trikes are absolutely amazing and so cool looking brothers! I didn't mean anything disrespectful towards your builds but I'm just curious why outside of easy and less expensive to manufacture?
are you building any rollers for sale?
you should use a cv axle system in the back end so you have a true independent suspension setup on that little trike, that would give you a smoother ride.
I love them they're awesome about merchandise I'm waiting for my trike haha thank you
You guys rock. Can I order just a frame/fork setup? Never mind guys, I'll Google. But FOR REAL, badass.
I will buy one welded frame and built myself one. I hope you guys lmk when it be back in stock. Thanks
I hope they do a giveaway. I’d definitely enter to win one of those!!
I agree!
Where can I find that complete rear live axle set up at ?
Are the frames available for sale
Looks mint
Пожалуй возьму за основу
Do you guys sale your products you could make a lot of money l would buy one in a heartbeat great job guys
Hi there. where can I get one of these? Are they for sale?
Right!!!
Use a little hair spray on those grips and they will slide on and glue tight
How much does one of these bikes run & can you ship to Hawaii?
😍 love it
How much are they frames
This would be dope with a little 4 wheeler engine
Where do u find the front fork
What clutch ya using?
I have a blokart that I am looking into making it eletric assist what would be the most affordable way to convert the rear into its own eletric axle power? Figured it would be a cool idea to have wind powered by sail and eletric to get it to the locations, or use both wind and eletric while useing on the coast.
How can I buy one of those trikes that you all just built
Where did you get the Fram and rear axel shaft from ?
Hey guys! Any info on what tire / wheel / hub setup you used? I have an old Cat Frame I want to build a trike out of. Thx!
On the black electric trike they use Unilli 12x9.00-6 and the treaded tires are a Burris 12x8.00-6. I do not know what rim they use or how to even figure that out.
The hubs are standard racing kart hubs on the rear. Check bmi karts.
Is the front fork on backwards?
Good stuff guys!! Im new here, u sell frames?
What size air filter you guys used og the ghost?
Where do I order 🤔 I want 1 now asap
I want one where can I find a frame at let me know
Where can someone buy one of these Trikes at or website at.
Where can I buy one? even if its just a kit I have to weld together I want one
Какой мощности ДВС?
I would love a gas-powered one thinking of building one myself how much you sell them for first
how wide of a axel is that
How do I get one of these mini trikes
What I can find the one thing like that how much the price
Do you still have frames for sale?
Where do you get the rims
Wondering if you will have a rough price on the electric ones
Any plans for sale?
I got some fire 🔥🔥🔥 😤😤😤 💭💭💭 get you more than high enough 🤣🤣🤣🤣
Where can I order the fram
Frames currently aren't for sale!
How can I buy one
What’s the rear axle name?
How much an how can I get two of them
How much are your frames?
You guys should put a link to where to get all the parts (cuz idk shit lol) plz nd thank you
Can I get a break down in parts for the electric builds I want to build something like this just on a bigger scale.
How do I place an order?
Great content. New Sub. Please smooth out the camera handling and un-neccessary zooming....I got seasick. :)
Can I still pick one up
How much for one?
You said flying off the shelves. You guys make these trikes?
I want to build one or buy one lol
Guys what’s the price?
Em rất muốn có một chiếc xe như vậy liệu em có thể nào không
How do I buy one lol
What are these completed bikes going for?? I need this!!!
Probably be way cheaper and more rewarding to learn to weld and make one yourself
A little under 5k a bit ridiculous I think 🤔.
I saw them for 1450.00
@@Bearded923 where are these cheap trikes at? These fools want 5k for one. Lmao.
I'm waiting for colinfurze to teach us how to build one without welding LMAO
Can you guys build one for me
사고싶은데 어떻게사야하나요
Where do you ride where the cops don’t keep bothering you because they are not street legal?
Front fork is on backwards 😂
Actually if you look at the old atc’s that’s how they were
Guys, how much does this beast cost?
You can literally buy this pretty much exact trike from rhapsody bike parts
The lie detector test determined....this is a lie
Hi guys I have feel dizzy with you video. But I like you bike, I make 2 wheels mini bike.
I feel headeck from video .u move much
Would you build one for me??? How muck
Learn how to build a car project, want to try it, want to learn
To criando uma com motor 4tempo de moto
Can you nerds answer some questions as to threes frames or are you just going to wait and cry when some fabricators start making their own?
Your front forks are backwards
If you guys ain’t selling Weld together frame kits for those. Idk what your doing with your life
Fork on backwards???? Switch it better rake!
Let's say a guy who's 6'2" 300lbs can be comfortable riding is this? Or is it for lil guys with a 250lbs weight limit? Lol
would love to know myself cuz this thing is growing on me
Are you the guys that sel the done mini trikes if why 4000 dollars
That is a terrible location for the intake, I'm not sure you could have put it on a worse spot, and for what these things cost you'd think there would be a better design.
You move way too much with that camera used the tripod is way better than you holding it .other than that keep them coming sir.
Great material! Horrible camera work!!!
Why are they only selling for 50 bucks your losing profit
That’s a scam
Its just a cheap ATV
STOP ZOOMING IN ffs
Qual a referência dessas rodas?
Where can I get one?
Where do I get that frame