WOODEN CHRISTMAS TREE CANDLE HOLDERS!!!
HTML-код
- Опубликовано: 20 авг 2024
- DIY wooden Christmas Tree candle holder or bookends!!! In this video I will show you step by step how to create these trees for a gift or to sell. #christmasdecor #christmastree #christmasdiy #woodproject #woodworking #christmasdecorations #christmasdecoration #diychristmastree #diychristmasdecor #diychristmasdecoration
Materials I used in this video:
Amazon Orders in Canada:
Sand Paper: amzn.to/3TnYreO
amzn.to/3U8WbIf
amzn.to/3TRIwpd
amzn.to/3FvuWDJ
Battery Dewalt Sander: amzn.to/3V9M9qq
corded Dewalt Sander: amzn.to/3HJ8acK
Golden Oak Stain: amzn.to/3TpjI7N
Sap Green Acrylic Paint: amzn.to/3DiQ5iX
Foam paint brushes: amzn.to/3TKuhSz
Dewalt Drill: amzn.to/3To0m30
Brilliant Red Acrylic Paint: amzn.to/3sGch0i
Great project. I will use CA glue with accelerator in addition to white glue to ensure my wooden pieces for the tree stick together. Thanks for sharing and giving the measurements.
Glad you liked it. I will have some new christmas projects coming up in the next few weeks. Stay tuned.
I know this video is from a year ago but I just watched it for the 1st time. In the video you glued the end grain of the candle holder to the trees side grain. You'll get a better and stronger joint paying attention to grain direction (side grain to side grain). The screws may not be needed anymore if glued properly, but screws will always grip better into side grain than end grain. The black tree was done correctly, the others were not.
for the weight and purpose of the tree they work fine. the candle holders have very little weight. I agree to watch the grains.
Awesome video brother. Thanks for sharing . Might have to make a few of those. Keep the content coming. Hope you have an incredible day. Much love and RESPECT
Have lots of smalls I am working on for the holidays. Thanks as always for watching. Have a great day.
Good video and job thx for sharing enjoyed it Johnny Ehs great channel
Thanks for watching!
👍
I would have used or will use a drill and drill a hole about a 1/4" deep where the candle sits just big enough to fit the candle.
I have multiple size candle holders and would need a larger forstner bit to do that but it definitely can be done. Thanks for watching.
Did you finish them after staining at all? With lacquer or oil or anything? Or is the project complete after the stain is dry?
Hi, thanks for watching. I put 2 coats of polyurethane on them.
What are your sizes for this tree
They are 10 inches high.
What kind of wood are you using? I used fence boards and they warped badly
For Christmas Trees I just used pine. Some of my other projects that use fence boards I do get some that warp but most are at least 15 years old and nailed to boards limits some warping.