WILL IT RUN? Abandoned 1954 Plymouth Plaza Suburban Sitting 45 Years $300!!!!
HTML-код
- Опубликовано: 1 окт 2024
- Today i bought a $300 1954 Plymouth plaza 2 door suburban that hasnt ran i 45 plus years. Its cool but completely roached. Will it run? Will it drive? car revival
If you want to Contact me nickmopar71@yahoo.com
#mopar #willitrun #plymouth #stationwagon stationwagon#chrysler #dodge #willitrun #revival #fyp #fypシ #fypシ゚viral #viral #viralvideo #willitstart #classiccars #racecar racecar #oceangate
Some of my favorite channels below
@JunkyardDigs
@GarageFab
@TheFabricatorSeries
@PuddinsFabShop
@ViceGripGarage
@DylanMcCoolVideo
@NoNonsenseKnowHow
@DEBOSSGARAGE
I like that you told us how much you paid for 'her'. Definitely worth it !! The tailgate and hatch are in good shape, hard to find for sure.
Thanks for watching Mark. There is more to come and I ALWAYS let my viewers know how much I have invested in a car. Thats one thing that annoys me with other channels they act like they have a hunk of junk. BUT how much did your "junk" actually cost.
Woo hoo first one here. Cool find!
Thank you Star Lord
That is worth fixing up.
100 percent
Motor sounds pretty tight to me after heating up. Like to hear with a muffler! I love flatheads and old MOPARS!
Flat heads will be my apocalypse motor!
Sounds just like a 3800 with the muffler cut off!!! But looks waaay cooler!😎👍💗
Kind of does!
Defiantly a cool car! After that horrible knocking sound, I can't believe it fired up. Those Flatheads are tough engines that's for sure!
Thanks Lee, im not sure what the noise is. Seems to only knock while turning motor over. After it starts up it sounds fine.
Well it hasn't been turned on for 45 years straight, so yeah it's going to have a knocking sound.
Very COOL car !!!
Thank you bruce
Good job on getting it running too.. totally awesome !! You know engines..
$300 wow what a gift, love it 🍺🍻🍺🍻❤😊🇦🇺🤝🇺🇸😎👍✌
Stole it at 300! Thanks for watching
Just a thought....because the roof is so bad, how about a "ranchero-ish" shop truck, moving the upper tailgate forward, leave the lower in place.
Those motors and trans are bullet proof, and with the "flow-through" ventilation, no need for A/C! 😂
Oh man that would would be next level redneck. These cars are HARD to find idk if I want to cut it up yet
when you got it running, it may my ears, it sounded like someone swaped engines and put in a volkswagon engine. did i get that right? i wish you luck with it, surprise the world with a new paint job,
Nope same engine
Great car ! Should get running and drivable keep original patina. Roof rot was caused by leaves, pine needles and water, rotting for decades, thats what rots out roof channels!
I had a 53 Plymouth cranbrook. I wish I still had it.
Have a 54 Belvedere 4door sedan. Great car. Greetings from germany.
straight Pices of glass no problem just the windshield but sure you can find one , So clean it up something like the 55 cool rides
For sure! Thanks
Nice one. Same age as me. (I've been sitting for 45 years too)... 🇬🇧👍
🤣 Thanks for the laugh
I was totally surprised😮 when y'all got the old Plaza running. Great job, my friend!👍😊
Thank you Gordon 🤠
Man we used to have these great freaking cars like this a 52 Dodge and it's running it's a 71 year old car and the motors original dig it man. Right on bud, but you going to need something to sit on it see if she's going to run and if the trannies okay, brakes that might be another little problem??? No big deal, these old cars, are the good ones to work on everything's easy to get to usually.
Nice!
Great job getting the ole girl running! I noticed it had a '57/'58 wheel cover on the right rear. Those were my favorite year Plymouths.
Those are the coolest hubcaps!
she is neat a good rat project thanks .
Thank you!
I noticed another Plymouth behind the wagon. Is it for sale too
Noticed it? That's the car I was robbing parts off of the whole time if you watched the video. And I have multiple videos on that car it's a 1951 plymouth
What did your white spoke rims come off of 😆Are they trailer rims ?
They came with the car. Yeah I'm pretty sure they are trailer wheels
Maybe has stuck valves too😮
Might be!
Awesome
Have a 57 Plymouth Sport Suburban myself. This was a real fun watch. Thanks for there post!
Thank you for watching
Needs small block
I agree 💯 360 this time?
Man if you like that old wagon cut off the bad top in rad rod style , make bows out of conduit and put a canvas top on it and replace windows with plexiglass .
Didn't think of plexi glass. Thank you
👍💪
💯
Hope you got the one behind it too!!!💗💗
Got it too!
Love that body style! I know it would be alot of body work, but come on, she wants to run!
Stay tuned and check back I have plans. Thanks for watching and the support
In Canada, the Plymouth Plaza, was also called a Dodge Crusader, just a rebadged Dodge, and not a U.S Coronet.
The front end on the crusader was a little different. But yeah in Canada all the American cars were slightly different or just renamed. Canada restricted American manufacturers from bringing cars in. So the manufactures set up shop in Canada as canadian businesses built the same cars and changed the names a little.
He paid $300 for a classic that’s great that’s awesome Pavan it from is it it’s got no title cost you over $300 just to finally get a title why would you buy a car I don’t care how old it is I don’t care what kind help me out good shape it it it is in without a title that’s a stupid
Hey William sorry to let you know this, but you are wrong. Thanks for watching.
Love those flathead 6 engines. Nice work.
They are the best!
Nothing but cool cars here, New Subscriber and we hit the bell watching from Cradle Mountain Tasmania Australia🇦🇺
Happy 4th July 😊 Cheers 🍺🍻🍺🍻 KC 👊🇦🇺🤝🇺🇸😎👍✌
Thank you Metalmania, happy 4th 🤘 🎸
@@somewhatfast my pleasure mate anytime and same to you guys 👊🇦🇺🤝🇺🇸😎👍✌
We had a '59 Suburban around 1966, had a 318 poly with a Powerflite trans.
It had a gas heater which was nice here in the cold winters of Wisconsin.
Oh for sure, Gas heaters are very uncommon in the south!
Sounded as though it had a knock early on when you first turned it over but it sounded sweet after it ran for a minute or two.
Good project car👍👍👍🏴
Yeah nice catch, maybe a piston slap from frozen rings or something. But she came back around.
318 dodge motor and transmission time from a truck !😮😂
I Did a 318 magnum in my 55 plymouth wagon. I really want to do a big block this time. Or at least a late model 360 magnum.
I had the 54 Sedan Delivery...paid $100 for it when i was 19/20...pulled it to loosen the engine,it STARTED THEN..the guy that sold it to me baught it back for $200
Bearing problems were not uncommon on those engines. They only had four mains. I've heard them described as having a rubber crankshaft in the past!!
I agree!
Loved the video would like to see fixed up as a daily driver look forward to next video.
Thank you for watching, We'll do something cool with it or use it as a donor for a 53 plymouth wagon. Hint hint.
@@somewhatfast Perhaps better as a doner car glass trim etc hard top coup missing a few pieces.
Can’t wait to see more on this one
Will try an get to it the coming year for sure
Congratulations on will it start. The answer is yes. Question where are you going to find a roof or a parts car.Ot sounded pretty good. 💯👊👍
Watch, and maybe you will see
@@somewhatfast looking forward to it. Will be watching.
Yeah the motor has me worried at first spinning over I'm there is definitely a "clack*" noise but once it's started it ran like a dream and idled!!!!! On that old crusty carb amazing
Our family had a '53 Plymouth wagon during the '60s. Congrats on getting that running and driving. If it were my car, I would clean it up, put seats in it, get it to stop, bondo the heck out of the roof, and go cruising in it.
That thang gotta Hemi in it? lol
😂Sounds like it
Man that car looks like Opel Olympia 1961 model although the german one is smaller in vidth
I agree!
These old cars run because they dont have a computer to tell them they can't. The advantage of simplicity.
100 percent agree!
That's when they built cars, cars of today won't last that long or run ! Good luck guy! 👍
Thank ya Tim!
good buy
Thank you!
How's the engine in the 1952?
It's junk it knocks and cylinder walls are pitted.
That's a shame (Jerry Seinfeld).@@somewhatfast
I KNOW WHATS WRONG WITH IT, DONT HAVE A 1ST GEN IN IT
You do know that if converting from 6v to 12v that the WIRING if good will be more than enough correct? 6v systems have much larger size wiring than 12v.
I would never use any wiring that is 69 years old. Especially on a car that had the windshield knocked out for 40 years. Its getting rewired.
@@somewhatfast
Yea probably not advisable if the windshield was out of it. Otherwise I’d say why not if it’s all good bc you’d be running the wiring technically at half rate. If it were me I’d do the rewire and use a converter to handle the 12v down to 6v for the accessories radio etc.
They at least used to make those boxes that did just that I have 2-3 of them somewhere in my garage lol
19:18 sounds like it could be a potential song remix or whatnot, hmm...
That would be funny
Those aren't the original hubcaps, they look to be more for a '59.
Yes actually for a 1957 Plymouth. Someone on the comments mentioned that. I like that style the most I might buy some for my 55 Plymouth. Thanks for watching
Roof rot is from mice in that area.
Please, transkrip to indonesia langue brother.
I'll have to look it up and try to figure it out.
That car is sweet
These plymouth wagons are underrated diamond in the roughs! Thank jesse
@@somewhatfast I Just love the shape andthe lines
Great job, good buy. P.S. Tx.
Thank you!
Good.job😄👍👍👏👏👏cool car. Plaza
Thank you!
Way To Go, man!
Thank you william
....just thinkin...i may have a Motors that covers that engine
I have books back as far as MoToRs...1943 I think
My Son seems to only be interested in the Chevy Truck 67-71....which sucks...So much knowledge will be lost when the last of us pass on by
That's good stuff to have
@@somewhatfast oh....not so much for me these days,the body caught hell in the 70's and 80's...I'm all done workin on those now
are you going to keep it and fix it up??
I'm going to build one. I'm not sure if it will be this one or if it will just be a donor.
@@somewhatfast I will just have to subscribe to your channel to see what happens. Thanks man
......just tosses the fuel pump, with glass sediment bowl, carelessly into the back of the car. Yeah someone that doesn't respect these vehicles - doesn't deserve to own them....
Thanks for watching I'll keep saving cars
A motor sounds good have a great day thanks to the video
Thank you!
That engine cranking over sounded like some Metallica was about to play for sec
😂 Really does!
"SPINNING OVER" IS EASY, BY DEFINITION
For sure!