33 watts of power- Atomstack A30 Pro
HTML-код
- Опубликовано: 7 апр 2023
- The latest addition to the Clack Shack, the Atomstack A30 Pro and a few accessories. This thing is a BEAST for saving time due to the power output and speed capabilities. More videos to come.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
www.etsy.com/shop/TheClackShack
For Clack Shack shirts, check out my store:
the-clack-shack.creator-sprin...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
Atomstack website- www.atomstack.com/
Atomstack on Facebook- / atomstack.official
Atomstack on Instagraam- / atomstack.official
Here are some coupons for use to purchase. Coupons do expire and dates will be below the links.
$150 off Atomstack A30 pro-
www.shareasale.com/u.cfm?d=10...
expires 7/31/2023
A30 Pro Coupon Code: A30PRO100
Valid period: 2023.06.13-2023.09.30
AC1 camera kit-
shrsl.com/4081j
$10 off F3 cutting surface- code $10offF3
www.shareasale.com/u.cfm?d=10...
expires 7/31/2023
$30 off R1 Pro roller-
www.shareasale.com/u.cfm?d=10...
Expires 4/10/2023
6 % off all orders-
www.shareasale.com/u.cfm?d=99...
The Clack Shack on Amazon= www.amazon.com/shop/theclacks... 
Наука
@10:02 it's nice that the shield is removable. I don't think I would ever keep mine on.. I am waiting on my Comgrow 20watt laser but I don't think it's shield is removable. I do have an idea of marking the sides with a sharpie right where the laser should be located. I think this will give me a better idea of where the laser will burn when I frame it in lightburn
On the Comgrow, the shield isn't removable, you can take the glass out but it is still very hard to see.
I love my x& Pro and it is all I can do to maintain control and not pull the trigger on the x30 with the e85 extension kit until I see some real world reviews like this.
I will be getting lots of use out of it. I have 2 orders of 160 each coming up soon.
I've picked up the xTool 40 Watt 'upgrade'. I have not had time to set it up on my extended 20w unit though. I'm dying to try it because at 40 watts 1/2" is possible from what I have been told and seen. I'm not working 1/2" materials a lot, but can't ever have enough power! Here's hoping Clack Shack can do a review soon as well.
I haven't tried the 40 watt but it 1/2 inch can be cut with multiple passes on some of my other machines.
Hi Thank you for detailed video,
Can you plz suggest best engraver and cutting for beginners, which one to buy , criyality, sculptfun , or atomstack ?
That depends on intended use, needs, size requirements and budget. I have many reviews on good machines but each has different strong points
Other than the head power, it looks like exactly the same setup as my A20. Question. Is the USB connection in the control box solid or does it wiggle around when plugged in? Mine really has a ton of play which has always bothered me. And I SO VERY MUCH agree with your assessment about where the cables come out. WHY does it have to come out the top? I wonder if the Module will work with my A20 setup since they look so similar?
It does look very similar but I cannot say if the modules would work or not.
Random question but I think you can help. I use Lightburn and have dealt with an issue since day one. Recently I got an Atomstack A30 Pro and the same problem exists so I figured I would dig a little deeper. The issue is when I go to frame anything, the laser head moves just a bit then the whole thing just locks up until I power it down. Is there any way you could share screenshots of your lightburn settings for this A30 Pro? Settings, machine settings & device settings perhaps? Thanks for your help and keep the great videos coming!
I haven’t had any issues, you can send them to my Facebook page
I've always wondered if the Adamstack and the Atzer were made by the same company.
They are very similar...
How is the detail on the 33watt? The stronger laser has a little larger laserspotsize (0.08x0.1mm compared to 24w that has 0.06x0.08mm)
Is it still smal enough or do you miss out on detail becaus of this?
It is not very noticeable compared to most 20 watt machines.
I placed an order two days later I got an email that they were out of stock. They offered a more expensive version because as they wrote these are available. I agreed and placed a new order after they returned the money. Two days later I got an email saying that this one is also out of stock! This company is a scam.
It may be that they are seriously out of stock. I have dealt with Atomstack before and they are a real company. They were doing a pretty heavy advertising campaign and could have sold all of the stock.
Atezr 35 vs the Atomstack A30 need a head to head video.
If I can get my hands on one... there is a rumor I may.
I have the X30 Pro where did you go to change the speed from 6000 to 18000? I have the same issues when I do burn tests. I know I am not getting the most efficient use out of the laser right now. Thank you 🙏
Machine settings… it’s a controller settings
@@TheClackShack I am also looking for this setting and struggling to see it in Machine settings
I am sure I am missing something but I definitely do not see max speed settings in machine settings
How do you focus the laser with the shield off? I just bought this laser.
Using the tool that comes with the machine. One way is shield, other is no shield. Sticker on the tool explains
@@TheClackShack Thank you! My laser comes tomorrow!
Ahhhhh....NOT the Falcon 2 33 watt like a suspected. 😂 👍
No, I would love to try out the new 33 falcon but haven't yet.
I enjoy your watching your videos, I have An Atomsack A5 and have the same complaint about the USB cable sticking up. I purchased a right angled USB cable so it doen't stick up it lays flat.
I guess that is an option. I managed to route them better on my new base and it is tolerable.
Maybe by the time I can get a laser they will be up to 100 watt and priced down to $500
Looks like it wont be long.. lol
@@TheClackShack Wish someone would send me a laser engraver