You can get full details at the link below. www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio?variant=494913609 You can also contact one of our tech advisors at 855-636-6287.
I have a 2011 F350 with the "Premium" sound system. It's got an 8" sub, and sounds very good for factory. Would I need the complete kit you're offering still? (Amp too?)
It would then have to be repinned into the new vehicle and that is a little beyond what we would ask of our retail customers but if you are comfortable then that would work. You would just have to have the radio programmed to the Vin of the vehicle and then that should take care of things.
www.infotainment.com/collections/all/products/brick-upgrade-kit?variant=329753713 Be sure to read the Compatibility Section so that you order the correct kit.
If the reverse camera is in the vehicle already from factory the wiring will already be pinned into the main connection harness. If it is added after the fact then it is likely RCA so it would need a new connection interface to intergrate into that radio. Or it would need to be hand pinned.
www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio?variant=494913629 You can talk to one of our tech advisors at 855-636-6287 if you have questions.
I have a 2012 f250 with the same radio in this video and a wrecked one with the navigation radio amp and everything can I just use the wiring harness from the wrecked truck
The wiring components that you would need are the same components that are included in our Ford Sync 1 Brick 8 kit. infotainment.com/shop/interior-accessories/amplifier-sound-solutions/ford-sync-1-brick-upgrade-kit/
Ford discontinued the OEM Amp so we were forced to go aftermarket through Alpine. Here is our solution for the AMP. infotainment.com/shop/interior-accessories/amplifier-sound-solutions/ford-sync-1-brick-upgrade-kit/ 2009-2014 Ford Expedition - BRICK 1 2009-2010 Ford Explorer - BRICK 1 2009-2010 Ford Explorer Sport Trac - BRICK 1 2009-2010 Ford Superduty - BRICK 1 2009-2010 Ford F-150 - 3&6 Button Config - BRICK 4 2011-2014 Ford F-150 - 3 Button Config - BRICK 5 2011-2016 Ford Superduty (’13-’16 XL & XLT Only) - BRICK 8
No we do still offer this but we do need to update that link. Thank you for bring this to our attention. Here is the new link: infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/2009-2016-ford-f-250-f-350-superduty-sync-1-gps-navigation-radio/
The included steering wheel switch that comes with the kit may not need to be used if you have the phone button already. Other then that we have not encountered this issue in years so this should have no issues. The programming on this was changed a bit and this no longer occurs.
You might have accidentally disconnected something from the Sync. I'd advise rechecking where you installed the plow harness and inspect any connections nearby.
I see this is a video from 7 years ago, but noticed your radio tuned to 101.1 WJRR in Orlando, so I happen to be local and would like to know if you are still doing these upgrades for people that are local. If so please send me a reply.
Cool! I am currently trying to fix an electrical problem on the truck, that seems to be caused by a bad SCCM. Since I will most likely be shopping for a new part at salvage yards, I will see if there any of the specific model SYNC radio and amp are also available too.
We do have a Sync 3 option for 2013-2016 Ford F250 F350 Super duty Here's a link www.infotainment.com/collections/all/products/2013-2016-ford-f-250-f-350-superduty-myford-touch-sync-2-to-sync-3-with-apple-carplay-and-android-auto-upgrade?variant=12231371816996
Unfortunately, this specific product is not compatible with your vehicle. However, here is a link to a product page on our website with a radio that is compatible with your vehicle. www.infotainment.com/collections/all/products/2010-2014-ford-econoline-e-series-sync-gps-navigation-radio?variant=42305349319 If you have any questions you can call us at 855-636-6287.
We do not sell cheap equipment. We sell OEM quality equipment that is fully tested, pre-programmed and procured based on your Vin. There are plenty of companies that sell cheap products. We want to provide a part that we are able to guarantee works and will continue to work. We are confident enough in the product we sell that we are able to warranty it through installation and up to two years depending on your selection at check out. We feel our pricing is competitive as we are comparing our pieces to the cost of getting a new vehicle as opposed the cost of an aftermarket part whose quality is greatly inferior.
hi, great video by the way! thank you. i have a question, i want to install in a 2010 explorer sport trac adrenalin. I already have a emplifi and I have to install a backup camera on the Chinese radio. my question is, do i need the installation kit if i already have a gps antenna, emplifi and sub oem and i would like to know also what is the connector for the rear view camera and if that takes programming. thank you.
Since we do not sell that radio we recommend you going to the company to where you bought the radio but we do recommend buying a OBD Genie Backup Camera programming kit for your rear view camera
![[OLD] 2009-2014 Ford Expedition Sync 1 Factory GPS Navigation Radio Upgrade Installation Guide](http://i.ytimg.com/vi/ILrPQTUxYpo/mqdefault.jpg)
Will this work if you don’t have the radio buttons on the steering wheel. My 2015 f250 doesn’t have them
How much for the unit and wire set for 2016 superduty with XM ,steering wheel controls and SYNC ?
You can get full details at the link below.
www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio?variant=494913609
You can also contact one of our tech advisors at 855-636-6287.
I have a 2011 F350 with the "Premium" sound system. It's got an 8" sub, and sounds very good for factory. Would I need the complete kit you're offering still? (Amp too?)
I got it all installed in my 2015 F250 but now it says I’m in Mexico when I am not, it is not letting me change where I’m at
If you purchased the radio from us, contact our support department at 855-636-6287. We can correct that problem.
Sync stopped working on my 16 will this fix the issue?
Yes. This is a complete factory replacement unit.
I'm going to need it all of that kit included the amplifier how I can order the
Can I just take all the wiring from the truck that I’m taking the radio ?
It would then have to be repinned into the new vehicle and that is a little beyond what we would ask of our retail customers but if you are comfortable then that would work. You would just have to have the radio programmed to the Vin of the vehicle and then that should take care of things.
How can I just buy the amp and the wiring without the button on the wheel and stereo?
www.infotainment.com/collections/all/products/brick-upgrade-kit?variant=329753713
Be sure to read the Compatibility Section so that you order the correct kit.
I have a 2011 F250 XL model truck without sync would this kit work for my application?
Yes it does
I am looking for the kit minus the headunit where can that be had at for my 2012 f250 king ranch
Unfortunately we don't sell a la carte.
Try eBay or Amazon.
There’s a guy he deserves French kiss from hot lady. Thanks for sharing
No problem.
What is the link to purchase this setup for Ford F-250 2011
www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio?variant=494913609
The reverse camera needs to be hooked up to the radio too !???
If the reverse camera is in the vehicle already from factory the wiring will already be pinned into the main connection harness. If it is added after the fact then it is likely RCA so it would need a new connection interface to intergrate into that radio. Or it would need to be hand pinned.
What radio did you buy
www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio
What about the screw that holds the back of the radio how do you get it out
Rewatch the video.
will this work with Apple CarPlay?
No unfortunately this is the radio before Apple CarPlay and Android Auto. You would have to have a 2017 to gain that feature.
How much does it cost to order this ?
www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio?variant=494913629
You can talk to one of our tech advisors at 855-636-6287 if you have questions.
I have a 2012 f250 with the same radio in this video and a wrecked one with the navigation radio amp and everything can I just use the wiring harness from the wrecked truck
The wiring components that you would need are the same components that are included in our Ford Sync 1 Brick 8 kit.
infotainment.com/shop/interior-accessories/amplifier-sound-solutions/ford-sync-1-brick-upgrade-kit/
Who sells the wires for the amp
Ford discontinued the OEM Amp so we were forced to go aftermarket through Alpine. Here is our solution for the AMP.
infotainment.com/shop/interior-accessories/amplifier-sound-solutions/ford-sync-1-brick-upgrade-kit/
2009-2014 Ford Expedition - BRICK 1
2009-2010 Ford Explorer - BRICK 1
2009-2010 Ford Explorer Sport Trac - BRICK 1
2009-2010 Ford Superduty - BRICK 1
2009-2010 Ford F-150 - 3&6 Button Config - BRICK 4
2011-2014 Ford F-150 - 3 Button Config - BRICK 5
2011-2016 Ford Superduty (’13-’16 XL & XLT Only) - BRICK 8
Kit not available anymore?
No we do still offer this but we do need to update that link. Thank you for bring this to our attention. Here is the new link:
infotainment.com/shop/interior-accessories/infotainment-radio-upgrades/2009-2016-ford-f-250-f-350-superduty-sync-1-gps-navigation-radio/
Will this work as a monitor for an aftermarket back up camera?
Yes. Let us know you've added a backup camera at time of purchase so the unit can be programmed accordingly.
Did you get the steering wheel buttons to work? Never showed how you fixed it.
The included steering wheel switch that comes with the kit may not need to be used if you have the phone button already. Other then that we have not encountered this issue in years so this should have no issues. The programming on this was changed a bit and this no longer occurs.
Installed a plow harness and now mysteriously the Bluetooth on my radio is missing. any ideas?
You might have accidentally disconnected something from the Sync. I'd advise rechecking where you installed the plow harness and inspect any connections nearby.
Can this radios software be upgraded to sync 3 to work with Apple car play?
Years 2013-2016 can be upgraded to Sync 3
Will this fit a 2013 Ford E350?
Unfortunately we do not.
Not sure. Contact one of our tech advisors at 855-636-6287. They can give you an answer to that question.
Is there a way to use a 2013 Nav screen on a 2011-12 model? I’m looking to order for my 2011, would prefer the 2013 nav screen though.
No we only provide the Ford 2009-2016 Ford F-250 F-350 SuperDuty Sync 1 GPS Navigation Radio for a 2011-2012 model F250
How does one update the maps?
ford.navigation.com/product/Catalog/Catalog_Ford_F-150_2009/Ford-Lincoln-Mercury-North-America-Map-Update-V11-0x-Includes-Gracenote-Disc/sku/U2192-0000-811NAM/en_US/FordNA/USD
I see this is a video from 7 years ago, but noticed your radio tuned to 101.1 WJRR in Orlando, so I happen to be local and would like to know if you are still doing these upgrades for people that are local. If so please send me a reply.
Hello there,
It's been a while, we apologize for the delay. We're in Oviedo, and we do installations by appointment!
Cool! I am currently trying to fix an electrical problem on the truck, that seems to be caused by a bad SCCM. Since I will most likely be shopping for a new part at salvage yards, I will see if there any of the specific model SYNC radio and amp are also available too.
Will this work for a 2008 f250 super duty?
No it will not.
Here are the upgrades we have available for the 2008 F-250.
I have a 2015 with plan sound stereo. No controls on the wheel. Will it still work? How do I order?
Contact one of our tech advisors at 855-636-6287. They can confirm every thing will work.
I heard you need to program the cars vin number as part of the install. Is that true? Thank you
We will do it for you.
Hello. What is the 16 pin connector for on this set up?
I dont want to provide incorrect install advice. Please reach out to our support team at 855-636-6287 Ext 1 or at support@infotainment.zohodesk.com
How much to send to Toronto Canada?
$45 for shipping to Canada right now.
Where can I get all that conexións do you think in the Ford diller
www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio?variant=494913609
Everything is included in the kit.
Will this work on a 2012 f1250 and where can o order one
Yes.www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio?variant=494913609
Do you have a factory radio to sync 3 solution?
We do have a Sync 3 option for 2013-2016 Ford F250 F350 Super duty
Here's a link
www.infotainment.com/collections/all/products/2013-2016-ford-f-250-f-350-superduty-myford-touch-sync-2-to-sync-3-with-apple-carplay-and-android-auto-upgrade?variant=12231371816996
So how much it cost to switch this over?
You are always welcome to reach out to our sales department 1-855-636-6287 Ext: 2 or sales@infotainment.zohodesk.com.
An the radio where can a get or what is the model?
www.infotainment.com/products/2009-2016-ford-f250-f350-superduty-sync-gps-navigation-radio?variant=494913609
If your truck doesn't have sync does that extra harness compensate for that
No, SYNC is included in a module that comes with the kit. You can contact our tech support for any further questions 855-636-6287.
Nice
Thanks!
Where can I get that wiring harness!
It comes with the purchase
i hope i can install this in my 2013 Ford Econoline 350 van
Unfortunately, this specific product is not compatible with your vehicle. However, here is a link to a product page on our website with a radio that is compatible with your vehicle.
www.infotainment.com/collections/all/products/2010-2014-ford-econoline-e-series-sync-gps-navigation-radio?variant=42305349319
If you have any questions you can call us at 855-636-6287.
$1600 for a click click click click is a fair price 🔥
We do not sell cheap equipment. We sell OEM quality equipment that is fully tested, pre-programmed and procured based on your Vin. There are plenty of companies that sell cheap products. We want to provide a part that we are able to guarantee works and will continue to work. We are confident enough in the product we sell that we are able to warranty it through installation and up to two years depending on your selection at check out. We feel our pricing is competitive as we are comparing our pieces to the cost of getting a new vehicle as opposed the cost of an aftermarket part whose quality is greatly inferior.
@@Infotainment_nav I would totally but this for my truck at the cost of the price . That’s a fair price to pay . 👍🏽💯
My question is I grabbed this same radio at the junk yard from an escape and the factory amp I just need the wiring can I purchase it alone from you?
hi, great video by the way! thank you. i have a question, i want to install in a 2010 explorer sport trac adrenalin. I already have a emplifi and I have to install a backup camera on the Chinese radio. my question is, do i need the installation kit if i already have a gps antenna, emplifi and sub oem and i would like to know also what is the connector for the rear view camera and if that takes programming. thank you.
Since we do not sell that radio we recommend you going to the company to where you bought the radio but we do recommend buying a OBD Genie Backup Camera programming kit for your rear view camera
@@Infotainment_nav is the steering wheel control included in the package or is this something. The customer has to buy themselves from ford
@@Infotainment_nav is the steering wheel control included in the package or is this something. The customer has to buy themselves from ford