So simple explanation. straight a lay man can easily understand and setup wifi repeater router in house. Keep it up. If the fiber cable connected is in a different floor or far away from main fiber cable connected router, RJ 45 ethernet cable has to be connected from main router to the repeater now setting up. While RJ45 cable is used one has to follow the allowed length keeping in view of signal drop instead of invariably increasing length. Repeater router will act as wifi device at new place once set-up.
I was wondering whether our internet speed will be better if we disable 2.4 GHz connection instead of 5 GHz because its faster and we will only have one connection active. Great video btw!!
Hey suraj. Your video helped me to do some changes to my router. Also I had bought a 15m rj45 cable without knowing it can be done wireless too. Found out after watching your video. Thank you. Appreciate it.
Hi Suraj, What should I do if I want to change to different Wi-Fi network. Now I have changed my broadband connection so. How to setup this to my new broadband network
Assist me on how to minimise speed reduction. From 100-150mbps in the main router, it reduces to below 20mbps. Tried with two brands including dir 816 model.
Can D-Link Dir 825 use as a Repeater without use of wire to main router? I want to connect to another router D-Link Dir 825 wirelessly and use it as repeater. Will it work?
I am using DLink 628 and my interface is completely different from this, with no option to use "Repeater" through the menu (I guess this is the newer addition to the firmware and newer routers). Wish I could find a Tutorial for my router to change it into a repeater.
It’s so easy to make old routers as access points and gigabit powerline kits I have wifi everywhere now I have 4 routers main router and other 3 as access points
Don't we need a rj45 cable goin between the lan port of main router and wan/lan port of the new extender router ? Is this cable required or not ? Pls reply
I followed the same steps but still my wifi is showing as limited & from mobile it's showing "Couldn't get ip address" just to note I use Static IP in my main router.
Brother this is very simple process. However, it is all good till last pop up of accessing. After clicking ok, takes 30 secs then shows me a link and writes " click this link to make further configuration. Once I click that, my router wifi is not detectable/ cannot be logged in. What could be the problem?
My respect to you! Your instructions are clear for newbies to understand. Thanks for sharing 👍🏽
Suraj you are crazy. Thanks for helping me in my masters project.
Saw videos having greater views than urs... But ur instructions were simple and clear.. thanks man... Got my old router extended
thanks a lot , this worked perfectly well for dlink router from 2015 in october 2023 also
So simple explanation. straight a lay man can easily understand and setup wifi repeater router in house. Keep it up. If the fiber cable connected is in a different floor or far away from main fiber cable connected router, RJ 45 ethernet cable has to be connected from main router to the repeater now setting up. While RJ45 cable is used one has to follow the allowed length keeping in view of signal drop instead of invariably increasing length. Repeater router will act as wifi device at new place once set-up.
I was wondering whether our internet speed will be better if we disable 2.4 GHz connection instead of 5 GHz because its faster and we will only have one connection active. Great video btw!!
Hey suraj. Your video helped me to do some changes to my router. Also I had bought a 15m rj45 cable without knowing it can be done wireless too. Found out after watching your video. Thank you. Appreciate it.
It really worked
I tried but after doing process it's doesn't connect
Really good video! Straight to point! Thank you!!! 😊
Well explained in very simple way. Great work.
Glad you liked it
Can use it for tenda router
Thanks a lot, man! Envy that Legion laptop BTW
Thanks man. My router keep refreshing through the process and hence, I am not able to complete.
Any way to do that?
Can 5G band be connected to this router through repeater?
Is it possible to use DIR 2640 as repeater/ extender ?
If yes pls share the instructions
Hi Suraj,
What should I do if I want to change to different Wi-Fi network.
Now I have changed my broadband connection so.
How to setup this to my new broadband network
Thank you for clear presentation. I loved your video and to the point information. I liked it. Thanks again. Keep up the good work.
Can we use this feature in old DSL Dlink Modem?
Assist me on how to minimise speed reduction. From 100-150mbps in the main router, it reduces to below 20mbps. Tried with two brands including dir 816 model.
fails at the last step and does not connect to internet using the configured repeater (router)
I am facing the same issue
Thank man, it helped a lot.
Thank you very much
Lots of love 💙💙
Thanks man. It worked. Big help 😀👍
What if i have a dual band router as my primary router and i use another single band router for range should i then also disable my 5g ?
No you Don't have to.
Can D-Link Dir 825 use as a Repeater without use of wire to main router?
I want to connect to another router D-Link Dir 825 wirelessly and use it as repeater. Will it work?
Same here,let me know if u are successful
Can it be used for repeating 5g band
So after doing this Both Of My Router will work Or just One will work at a time ?
I am using DLink 628 and my interface is completely different from this, with no option to use "Repeater" through the menu (I guess this is the newer addition to the firmware and newer routers). Wish I could find a Tutorial for my router to change it into a repeater.
It’s so easy to make old routers as access points and gigabit powerline kits I have wifi everywhere now I have 4 routers main router and other 3 as access points
Does lan also work on repeater
Yes it does.
Please show if the root ap / parents router recognizes the extender as a Client or not.
Show us connected client page in the parent router's gateway.
Sorry. I don’t have access to the router anymore.
@@techhaul5588 ok
Freakin amazing! Thanks a lot bud, it worked
Great video!!
Bruh! Could you please tell me way thank you? You helped a lot. Thank brother
why did u switched of 5ghz
Can i use the ethernet cable for pc connection after this process
Yes you can.
THANKS, BRO
IT"S VERY VERY HELPFUL
glad this video could help.
thanks a ton brother. true lifesaver. 🔥🔥
Glad this video could help you brother!
I have a older dlink router and I don't get thr 'Wireless repeater' option :(
What can I do?
Same here, I'm trying to watch videos but everyone is using wireless repeater. Did u find any??
@@adilsukumar9189 I figured it out.
This video helped
ruclips.net/video/REiL6r00GC8/видео.html
@@Jonas-ej7id Thanks bud, it worked!
@@adilsukumar9189 👍🏼
Very nice video brother.
Thanks a lot sister ✌️ A sub would be appreciated 😅
Well done suraj.
Thanks ra❤️
Hey great video but I can't find wds option and the menu is different and I have no option of wifi repeater and both my devices are dlink wifi router
Thank you so much I just configure my wifi in 2 minutes is really easy
Thank You very much
Thanks a lot dude
wireless repeater option is not showing in the same model
My d link router 2750u doesn’t show these settings
Don't we need a rj45 cable goin between the lan port of main router and wan/lan port of the new extender router ?
Is this cable required or not ?
Pls reply
Of course no
I have same router but can’t trace repeater tab. Kindly help.
Hi, even i don't see the repeater tab.
Bhai wired cable ke through bhi video bnao jio fiber se kese connect kare.
my router doesn't open the configure page when i connect it
You need to go to 192.168.0.1
khul he nahi raha vo
@@MakdiManav then maybe it's not connected properly bro.
insta id kya hh aapki ?
I followed the same steps but still my wifi is showing as limited & from mobile it's showing "Couldn't get ip address" just to note I use Static IP in my main router.
i cant see my router on my laptop. i tried using ethernet but it still doesn't work. pls help asap
Bro what will be the new username and password for ip login?
Thanks bro✨
I can't find the extender option
My one is not connecting with the internet
Thanks a lot 😀
Thanks it was very supportive
Very helpful
After site survey procedure I am not getting ip address page it automatically log out. Please help?
I didn't understand your probelm properly.
Brother this is very simple process. However, it is all good till last pop up of accessing. After clicking ok, takes 30 secs then shows me a link and writes " click this link to make further configuration. Once I click that, my router wifi is not detectable/ cannot be logged in. What could be the problem?
Once reset it and try again with the process I showed.
I want to use as wired repeter .
Dono rauter ka ip same hona chahiye?
Different
Thank you I was successful
glad that this video could help you.
Thanks a lot
you're welcome bro!
Showing problem WIFI Doesn't have valid IP Config......................................................... Please provide solution for this
Bro my d link page does not have the wifi repeater option . What do I do ?
Check videos related your router bro.
Not getting buddy what to do
@@joelvfrancis5644 cant really help bro. sorry
Saved my money!🔥❤️
I am so glad this video helped you!
Repeater option not showing kindly help
Check once and refresh bro, you will find it.
Thanks bro
I didn’t find the IP address option after selecting my original wifi
Wish me good luck 😬 I'm going try it 😌
Maa inti pakkana valla wifi password elaa kanukkovaali?
Share part of the wifi exps, it's very cheap now a days. They won't bother sharing PW
How to set a password in this
Cannot obtain ip address
How to change the password of 2nd router
Just go into setting of that router.
Great job...it works for me👍
✌️
Is not working 😢
It's coming could not connect
Improve the voice volume
point noted!
Cant see your screen bro
5G raeapairter plz speed tst
bro ur insta id plz i have to discuss something really important
Bad explanation