Hi, at 23:20 virtual network editor. On my side it's not showing VMnet information - bridge and PA only cli access is working but for gui not showing dhcp IP in PA. Please suggest
Hi Bikash, just a comment, earlier you connected cloud 0 to ethernet 1/1 on palo and then you replaced to ethernet 1/1 interface with management 0 internet, that's why you got DHCP IP assigned, it took me time to figure out how you got it, but this was helpful. thanks
I have every component working but one thing I have not been able to solve. Poor network performance from Windows 2019 qcow images. I’ve tried the Virteo network drivers. Didn’t help. Note EveNG speed test from command line pulled several GBS per second. But Windows running inside eve isn’t more like 56K. I mean it’s unusable. I can’t even download chrome browser as it takes hours. Is there a solution to poor Windows performance for networking when running inside Eve-NG??
Sir/all, i successfully download file rename it but when as per standards but when i open my eve ip through Chrome and add node it not showing Paloalto 100 and like any devices, kindly help me out i just get irritated now. 😩😅
Hello Sir, Thank you very much for sharing this video!! I was able to boot up the PA. However, As soon As I turn on the FW the CPU reaches 90%. I dont know if I am missing something. Any idea will be highly appreciate it.
Thanks for comment. Hi Luis, When we start palo alto the cpu will go 90% but after sometime it will come down. But you PC should have minimum 4 cores and 6 GB of RAM. How to check the cores and ram. I have showed in my video. ruclips.net/video/VC6y9y8XCO0/видео.html
Hi Bikash, Much appriciated and really helpful video i started following your video and finished 10 videos . But i am not able to install . Problem statement : when i turn on the PA or any device it is not getting started or turning blue from grey kindly suggest me naming is proper reinstalled 3 times still not working
HI @Bikash I have done importing image as your guidline, but when i start the device, it stuck at below prompt, and nothing happens after that. I even did "unl_wrapper fix permission". The image size is same. Can you please help. ------- Booting 'PANOS (sysroot0)' root (hd0,1) Filesystem type is ext2fs, partition type 0x83 kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core console=ttyS 0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev/xvda2 hugepages=0 [Linux-bzImage, setup=0x3c00, size=0x393870] ----------
Hi sir, eth0 Link encap:Ethernet HWaddr 50:00:00:03:00:00 inet6 addr: fe80::5200:ff:fe03:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:1968 (1.9 KiB) error is comming when start the palo alto in eve ng
Thank you for sharing these informative videos, i followed all process but after successful boot up, i dont see any interface on cli, even management interface is not showing. anyone has same issue ??? i have panorama running on same eve environment and showing all interfaces.. i tried different versions but same results
same here. I'm able to use the gui, do a login but even if i add the ip, dg and dns i cant connect to anything from or to it. Its the only device that is not getting the ip by DHCP from cloud so it must be something related to this device only. Have you been able to solve it?
Username and password not taking admin admin after multiple attempts ... Even i tried after 10mints also .. it is showing login incorrect... Any idea abt this
Hi , Thanks for the video but I can't go further .The password is not accepting .I waited for a hr now. But still it stuck in "old pwd" then "new pwd" then "confirm pwd" ,finally back to PA-VM login:
my image is uploaded but when i start it the cli doesnt load but windows 7 is loading and its asking for password and i tried everything but says password is incorrect plz help
Man You Are Expert
Thanks Bikash, you are doing an awesome job
Please keep going. Setup an HA environment with 2 Palo’s
Hi, at 23:20 virtual network editor. On my side it's not showing VMnet information - bridge and PA only cli access is working but for gui not showing dhcp IP in PA.
Please suggest
Hi Bikash, just a comment, earlier you connected cloud 0 to ethernet 1/1 on palo and then you replaced to ethernet 1/1 interface with management 0 internet, that's why you got DHCP IP assigned, it took me time to figure out how you got it, but this was helpful. thanks
This was helpful
Thanks for wonderful vedios PA kindly share LAB manual if you have .
Thank you❤😍
FYI, when adding the cloud connections to the firewall, be sure the firewall is stopped!
Yes in eve-ng community version, but eve-ng pro version it is not required
@@BikashsTech thank you for the clarification! And for all of the great videos!
@@BikashsTechfyi, your patreon link doesn’t appear to be working for me. 😢
@@augustbernard3396 you can join the membership of channel.
I have every component working but one thing I have not been able to solve.
Poor network performance from Windows 2019 qcow images.
I’ve tried the Virteo network drivers. Didn’t help.
Note EveNG speed test from command line pulled several GBS per second.
But Windows running inside eve isn’t more like 56K. I mean it’s unusable. I can’t even download chrome browser as it takes hours.
Is there a solution to poor Windows performance for networking when running inside Eve-NG??
Hi summer,
You can connect the server directly to cloud0 so that internet would be faster.
Youb are that Guy and I love you
Hi sir, Palo Alto gui access is not working. PA is not taking dhcp IP. Please suggest
Sir/all, i successfully download file rename it but when as per standards but when i open my eve ip through Chrome and add node it not showing Paloalto 100 and like any devices, kindly help me out i just get irritated now. 😩😅
as you mentioned we need to wait for 5 min before we enter credentials to PA. After waiting for 3 - 5 min, PA is rebooting
kindly help
In that case, if you have wipe out the device and try to start
Hello Sir, Thank you very much for sharing this video!! I was able to boot up the PA. However, As soon As I turn on the FW the CPU reaches 90%. I dont know if I am missing something. Any idea will be highly appreciate it.
Thanks for comment.
Hi Luis,
When we start palo alto the cpu will go 90% but after sometime it will come down. But you PC should have minimum 4 cores and 6 GB of RAM.
How to check the cores and ram. I have showed in my video.
ruclips.net/video/VC6y9y8XCO0/видео.html
@@BikashsTech What is the password
Hi, checked all things but palo alto is not getting started. Please help me out with the issue.
the palo alto machine is now in the vm. I am able to see the machine but when i click it and wanted to start the node, it doesn't start.
Hi thank you for such awesome videos can u plz share what is the network adapter settings u used for eveng by default it is set to bridged(automatic)
For cisco IOS image which one I need to download from this. . .
Hi installed evng and pan os but unable to get ip from dhcp please support
How you palo alto is connected. Have the taken network cloud with cloud 0
Hi Bikash,
Much appriciated and really helpful video i started following your video and finished 10 videos .
But i am not able to install .
Problem statement : when i turn on the PA or any device it is not getting started or turning blue from grey
kindly suggest me naming is proper reinstalled 3 times still not working
1) make sure your BIOs has virtualization is enabled
2) Enable the same under Vmware >system acceleration .. select nested VT/Amdx
@@rushikeshpatil1983 hey buddy can you elaborate it
hi bro, unable to open in browser with ip address, plz tell me what is the issue
try connecting to MGMT interface to PC and give IP address and check.
Hi, as soon as i turn on the firewall and open console it shows Critical error. Entry Reason: FIPS failure. any idea?
HI @Bikash
I have done importing image as your guidline, but when i start the device, it stuck at below prompt, and nothing happens after that. I even did "unl_wrapper fix permission". The image size is same. Can you please help.
-------
Booting 'PANOS (sysroot0)'
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core console=ttyS
0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev/xvda2
hugepages=0
[Linux-bzImage, setup=0x3c00, size=0x393870]
----------
i am not able to start palo alto, it is not getting started
Hi sir,
eth0 Link encap:Ethernet HWaddr 50:00:00:03:00:00
inet6 addr: fe80::5200:ff:fe03:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:1968 (1.9 KiB)
error is comming when start the palo alto in eve ng
Do you have paid course?
Can't we run paloalto with google cloud GCP account ?
Thanks for comment.
Hi Reddy,
Yeah we can do it.
@@BikashsTech can you please make a video on how to copy PA image to GCP please sir
@@lvreddy8237 please follow below video
ruclips.net/video/ew1lnkYDky0/видео.html
@@BikashsTech sir PA image not opening after transfer like not turns into blue...what might be the issue
@@BikashsTech by following this videos only I created GCP account thanks...and I can able to access routes..but not PA
Thank you for sharing these informative videos, i followed all process but after successful boot up, i dont see any interface on cli, even management interface is not showing. anyone has same issue ??? i have panorama running on same eve environment and showing all interfaces.. i tried different versions but same results
same here. I'm able to use the gui, do a login but even if i add the ip, dg and dns i cant connect to anything from or to it. Its the only device that is not getting the ip by DHCP from cloud so it must be something related to this device only. Have you been able to solve it?
Username and password not taking admin admin after multiple attempts ... Even i tried after 10mints also .. it is showing login incorrect... Any idea abt this
Hi ,
Thanks for the video but I can't go further .The password is not accepting .I waited for a hr now. But still it stuck in "old pwd" then "new pwd" then "confirm pwd" ,finally back to PA-VM login:
my image is uploaded but when i start it the cli doesnt load but windows 7 is loading and its asking for password and i tried everything but says password is incorrect plz help
what is the password ?
Useless, we need version 10 above