I MADE A BILLY BASS SYNTH MODULE - FROM A MEME
HTML-код
- Опубликовано: 6 сен 2024
- There is something fishy about this one!!!
Support these videos and get loads of extra content/videos/music :-
/ lookmumnocomputer
it also makes @THIS MUSEUM IS (NOT) OBSOLETE possible
------------
THE TWEET from @disasterradio :-
/ 1460149022967042051
-------
List of Gear/Electronics I USE :-
www.lookmumnoc...
------------
@THIS MUSEUM IS (NOT) OBSOLETE :-
this-museum-is...
------------
the 3d printer i use :-
www.lulzbot.com/
-----------
THANKUS HUMUNGOUSO to :-
CoFFeeTaBLesE
David Dolphin
Karl Jansson
casey
Miles Flavel
Scott Armstrong
worldofchris
-------------
Paypal :-
www.paypal.me/...
-------------
SPOTIFY :- bit.ly/LMNCSpotify
Facebook :- / lookmumnocomputer
Website :- www.lookmumnoc...
Instagram :- / lookmumnocomputer
Always looking for old gear! to mod or conserve in the "museum of everything else" one day
www.lookmumnoc...
#diy #modularsynth #modified
Leave all related bass puns in this pinned post
The easy bake oven could make many more crumbs
interestingly, the fish bite on low-frequency vibrations ...
"solder the bait"
Why are DJs bad fishing buddies?
Because they keep dropping the bass...
"clockwork fish"
“Scale wasn’t a problem”, well played sir.
Oh my lord
lots of fish jokes around, you can get them on the net...
I first thought this was a music joke. Then I learnt that it was a fish joke. Now I don’t know the scale of it.
Finish was an issue though
Me: "What even is the point of this?"
Me, immediately after the mouth moves: "THIS IS AWESOME!"
The best things in life are dumb.
so true
lol ye, from "no one needs this" at start, to "I need this" at the end
That’s precisely the point that got me on board!
everybody gangsta until the fish starts spitting out synthesizer noises
Nothing wrong with making a quick video for a major breakthrough in meme audio tech, this is WONDERFUL
The new Novation Bass Station 3 looks amazing!
Lol, you got me
Your builds are one of the highests forms of art.
A new project suggestion… Servo-driven dancing Knock ‘em Sock ‘em Robots that dance to your beats, while throwing sick beats at each other (and occasionally knocking each other’s blocks off in 4/4 time!) 🥊 🤼♂️ 🥊
It'd be like that scene in Ironman 2
@@rus0004 Yes!
Absolutely wicked! Billy needs a pair of shades now.
the reaction at @9:03 made me so happy
Amazing. You need to replace the eye with an LED that can also be triggered.
This is one of the most epic things you've ever created! And that's saying a lot.
You can tell that's so by his response at the first playthrough!
This and furby organ brought tears to my eyes
ALL YOUR BASS ARE BELONG TO US
Woah that’s amazing!
I collect these singing fish and that’s a great way to give ol’ billy some new life
I should try this honestly
Also you should try to make one of these with like a Christmas animatronic
Like a singing tree
Or the dancing snowman that spins snowflakes!
I'd be entertained by a full rack of audio bastardised novelty toys to elevate them from their low beginnings! WHAT'S NEXT!?
Elmo!
Yeah, an old Tickle Me Elmo would be great for that I think
I wonder what he could do with those dancing Coke cans from the 80s/90s.
The original speak n spell was bendable to heck and back but what about the new one.
This reminded me so much of these videos of the bass with really low batterys, sounding like a demon from another dimension. Loving those and this one too, great project :D
I would put you in the top 3 coolest ever youtubers. Thank you for sharing content
who are the other two?
@@jp9403 the top 10 list of best channels is more well rounded but I would say top 3 coolest individuals based on personality and drive:
Look Mum No Computer, Colin Furze, Bobby Duke.
If someone had this video on a vhs labelled 'the future: 2021' back when these were in people's houses and showed it to me then I'd totally believe it.
It's a fish -- of course scale is priority!
This is totally bonkers and I love it.
Next thing to do, after fixing the motor, is to find a working circuit board and circuit bend the hell out of it. And then make the bass and furby perform a duet.
I am glad to live in a time when important things like this is happening.
LOL that's great seeing a meme come to life, I used to have a billy the bass too XD
"Here's a little song I wrote, ya might want to synth it note for note, don't worry, CV happy now"
Firby can't be silenced
Long, long ago there was a kid's marionette which only had a horizontal support stick above it in the shape much like an overgrown lolly stick which supported the marionette and by the operator gently tapping down on the stick above the marionette's head, it would make the marionette do what looked like Riverdance. That would be an interesting project.
I've heard them called limberjacks (in the US), but apparently they have dozens of names! From Wikipedia:
UK/Aus - Jig doll; dancing doll; busker's puppet; clogger; jigger; Mr. Jollyboy or Mrs. Jollyboy, etc.
USA - limberjack; limberjill; limbertoy; paddle puppet; stick puppet; Dancing Dan or Dancin' Dan; Dapper Dan; Dancing Jo or Dancin' Jo; Stepping Sam or Steppin' Sam, etc.
In French-speaking parts of Canada they are referred to as les gigueux.
en.wikipedia.org/wiki/Jig_doll
You're absolutely mad and I love everything you do.
"Eeeh it's not really gonna be a work of art."
I beg to differ.
I've watched this video with my neighbor whom I invited to see it. We both laughed amazed by your creativity (and speed in DIY). :D My neighbor, who's totally not into synths and DIY, appreciated your ingenuity and imagination. :D Of course I liked the idea too. :D Thanks for the good, entertaining video. Cheers!
Dude wtf that internal mic to delay was actually such banging ambience
This was more than I expected
I now know what I want for Christmas. A Billy Bass and Furby synth module.
I can’t wait for them to sing “Greensleeves” with Kosmo.
@@Benzene265 I want to hear Ave Maria. 😸
Not gonna lie, this is the coolest shit I have ever seen on youtube since 2005.
The slightly nervous laugh at the very end was a perfectly legit reason to do this.
This was good one. I was grumpy before I watched this, and now I'm sporting a big smile. Thanks, man.
Can't wait to see It with the replacement motor😍
Never thought I would hear music made from a billy bass tail motor. Amazing.
This is an amazing feat of engineering and you are a genius 😂. Well done
its amazing to see you implement these old toys into this beautiful machine
Oh wow, so funny to watch Billy Bass in action. I see them often in the thrift stores over here so now I might just have to pick up one :-)
"Tip and Ring" old terminology from the old operator assisted telephone days for the contact parts of the jacks used at the switch board.
this dude is a literal genius I love everything he does
What a beautiful synth.
I'd suggest getting Billy some tiny sunglasses for a more hipster look.
Or perhaps some rapper chains around his 'neck'? (Do bass have necks?)
Funny piezo wiring, its not a voltage divider but a short-circuit to the piezo if turned full ccw. Is that on purpose to reduce noise or just out of the moment?
it works well. usually all inputs on synths are pretty high impedance. this works better and acts like a good volume voltage control and is more useful than wiring it so the centre pot is the output, as this will cause a sink if anything else is plugged in aswell. obviously if i buffered the output i would wire it the other way. but when you keep designs cut back and simple you bend the rules and 9 times out of 10 it makes fudge all difference anyway. but it does still react like a voltage dividing volume control
its better to short circuit the piezo than short circuit the output, so its a weigh up between the two :)
I grew up going to the studio my dad worked nights at. The owner of said studio was also a professional fisher. He was absolutely obsessed with everything fish related. Literally had a half million dollar fishing boat built into a custom garage that connected to his office. When the bass fish musical thing came out he immediately made his own version and ordered many, many thousands of them thinking they would sell like hotcakes. Nope. Years later I had a box filled with the innards. Haha eventually threw it out cause I didn’t know what to do with it. Guess I could have made a synth. Haha
With any other creator this would be their whole thing.
With KMNC this is is like friggin Tuesday. Such talent.
Man, you're such a mad scientist.. and i love it.. big ups dude!
I laughed way too hard at that tail action! Bravo sir!
Oh wow, this looks really janky - but it works so it's fantastic. You making it up on the spot is a great showcase of electrical engineering. Kinda want to be able to do this on my own one day.
only you would take a joke photoshop picture and make it real! LOVE IT!!!! Keep it up mate!
I'm dying here, it's all too delightful XD
If I ever start tinkering with electronics, I think this might be my first project.
FUCKING GENIIOUS BRO ...YOU DESERVE AN AWARD FOR THIS ONE
What about getting a whole school of those Billy Bass fish together and making them into something like the Furby organ?, that would be pretty rad.
It would definitely look crazy. And how about adding different fish, not just Billy Bass.
I love all the mods people have been doing to the Billy Bass, there's some neat ideas out there; Thanks for breaking it down for us! All you need to do now is integrate a tuner into Billy, then it would be a tuna fish! Would the same mosfet circuit drive the section where the motor is burnt out as well?
Oh Gawwd, 'Tuna Fish' LOL
The pun section is upstairs ;)
@@petegaslondon oops, just noticed the pinned post, my bad.
@@BigEpinstriping I think its just to keep all the groans in one place :)
'Courese there was this beer called BASS (like the fish) as well...
puttin a mic in it is next level brilliance
To answer the age old question. Yes you can tune a fish.
One of my first videos here on youtube is a skull I made from a bunch of things. The mechanics is from the singing lobster and billy bass and hacking it together where it worked like I wanted it to, the only thing is that its in Swedish. But its sings snaps songs so I had it on midsummer with my family.
This whole setup has had to have fallen over atleast once.
Best improvement for your setup !
Haha!! I just had a weird flashback to Pizza and Pipes, now thinking there needs to be a new electronic version of that. LOL
Sam you mad lad, this is the content I come her for (aside from you bangin music) half hour mad science experiments !
disasteradio always have the best ideas. awesome execution!!
Why do I like this one? Funny and cool at the same time.
Dude you have absorbed way too much electricity ...
Freaking awesome
Need to use this to do a cover or remix of "Fish Heads, Fish Heads, Roly Poly Fish Heads"
Next, a speak and spell module. The world is your lobster!
Goodness gracious. This is so dumb it's amazing. I love it. Lol
When you had to visit the garage sale at 7 but then you had to address the Synthizens of Synthos and challenge David's right to the throne at 7;30
going through a breakup rn, was feckin being haunted by Louis Capaldi every time i walked into a Costa.
This is what i really needed today haha
Time for an antique electric razor-controlled synth.
I love your antics!
Mate you're bonkers! Don't stop tinkering, cheers!
The saw is a useful tool to solve scale issues XD
Love it! Would the piezo be more fun once you have the motor working for the body? Like a weird drone kind of rumbly whooshy noise?
You never cease to impress and amaze me. Excellent job 👏
Used this to fix my guitars wiring, so thanks for that haha
Bravo! I love that you took a flier and decided to just bash that together. Magic. :) One request... please please please call that module "The Lunker". Keep On Keepin' On!
Lol..
You'll be modding those dancing daisies (from the 80s) next...
The reveal was amazing. Actually laughed out loud. Great work!
The nicest think to see at the morning before the job
Just needs a lo-fi sample chip with the word "BASS" burnt to it as part of the mouth control circuit. Make it the BASS bass.
Yo dude that’s some good music! This should be the new Billy bass music!
Well then you just made my day I needed a good laugh that is Christmas Eve of 2021 hope you and your family have a good one and a Happy New Year's if you celebrate that across the pond
I'm just joking I do believe you all celebrate New years I've just never left the country of the United States
dude!
you kill it everytime!
greets from germany
THIS IS AWESOME AS ALLWAYS. YOU'RE A BAD ASS BRO.
This deserves a million views! Genius!
Why am I watching a grown man make a Billy Bass synth module.
I L( )VE how excited you still get when you do a thing!
pretty good for something so BASS-ic😌
Your original was Travis Trout not Billy Bass. Sheesh. Anyway great job. I laughed out loud.
Just like the Bride of Frankenstein ,Billy needs a girlfriend.Please make him a Shirley Bass-ey .
It's all about that Billy Bass ... no trebble
Mom: "We have basshunter at home."
Basshunter at home:
Do you ever sleep sir?
Thanks heaps for all these entertaining videos !
This. Is. Effing. BRILLIANT. I never wanted a modular more in my life. This and the encaged Furby. You mad professor.
Hahah that turned out more awesome than I expected. Nicely done. :D
Great build!
A lovely bass module
i appreciate the potentiometer wiring tutorial
Seems that the fish is having fun there!