Yamaha YFZ350 Banshee with DMC Pipes VS SuperCub 520 Banshee Build

Back to Back Dyno Comparison of a stock Yamaha YFZ350 Banshee with DMC Pipes VS SuperCub 520 Banshee Build.
Tested at Dyno Dynamics.
Builds by MAK Custom
IG: @makcustomparts // @mak_custom
www.makcustomparts.com

[@harleyloco1853]

Man like mak.. the only person to go to for banshees 💪

[@SAVING_ICONIC_MACHINES]

Man love the channel already and I’m 5 seconds into the first video!! New sub here 🎉

[@shad3654]

Good work mak man I hope to see more videos like this not to many people are out here doing videos like this for the banshee community

[@evana1112]

That bike should make a ton more hp, my stock cylinder 4 mill pump gas banshee makes that much hp, my 4mill stock cylinder on alcohol made 100+hp, that’s a lot of money to spend to not make very much hp when you could have just slapped a cheaper 4mill crank in and have your stock cylinders ported. My buddies 521 on alcohol makes 140-150hp

[@chadwems]

Correct. My Tony Miller 521 super cub on alky made 149 hp. with out of frame shearers. Their super is misfiring and breaking up. The stock banshee sounded healthy.

[@josephhamilton5185]

Those joker graphics got to GO

[@leeloko969]

Lovely work mak

[@mikesarahmccourts6509]

Those numbers are way off, we build a lot of 421’s it should be in the 90’s then we play with timing and jetting for a couple of points. If it’s a serval 421 it will be a few points lower than a cub but not that far off I don’t think I would run the lectrons we have the jetting perfect with the pwk’s maybe those pipes aren’t working a 421 with Shearers and 35pwk’s will be in the 90’s for sure.

[@angelmendoza1876]

how much would it take roughly to make a 100hp sleeper banshee.

[@SAVING_ICONIC_MACHINES]

Why haven’t you done any more uploading bro?

[@STILLNIGHTPEARL]

Really low numbers, my 421 cub made 91/48 as cast on race gas on a hot summer day. My previous build, a 4mm stock cylinder on stock carbs made more power.

[@HcpquadsNbikes]

Sickk!!

[@bethanyhaskiell9116]

My Redline Racing 421 Cub made 94/48 on 93 mix with VP Octanium those cylinders must have stock ports or something

[@claudeperron780]

521cc, not 520 ;-) nice video

[@dfray493]

👑🔥🔥🔥

[@clutchshot247]

Beautiful banshee, absolutely gorgeous,but i was thinking that motor would put down over 90 rwhp.. is it ported/polished? What cylinders? I do think that dyno is strict but my 421 puts down more..

[@Bansheeman174]

my 521 makes 120whp it has a drag port and it runs on 110 octane

[@JDRTRM]

Right. I have a built 94 dark purple 403 4mil etc etc etc etc etc owned it for over 25yrs lots of $$$$ invested trail quad making 63hp dyno and would think this build should be no less then 20 more all day no less . Something can’t be right

[@powersportsenthusiast1986]

hes running knobby tires on the dyno.. should be running smooth tires

[@Bansheeman174]

@@powersportsenthusiast1986 slicks add 2hp he probably doesent have ported cylinders or the dyno is wrong

[@emlrider4885]

In which world have stock banshee 33hp? My blaster have 35 :)))

[@Duneman]

Sweet video but ditch those rear tires on a dyno

[@makcustom]

Ok will do

[@SSReese]

sound like the stock one needs a tune an jets changed

[@paulkerr2009]

💪💪💪💪💪💪💪💪💪

[@Thebassguru84]

Should be way over 100hp

[@RedlineRacingLLC]

You cannot Dyno with knobbiest and expect any hp.

[@notoriosdragking0079]

Nice Banshee Build. Check the more fastest Banshees in Puerto Rico on my Channel.

[@michaelpizarro99]

Que lo traiga para pr para que vea cómo se lo ponemos a gozar de verdad 🔥🔥🔥

[@ThomasCrusero]

Lmao retire from the banshee game. I made 75whp on my stock crank / stock cylinder

[@soren9122]

graphics need to go, ruins the build

[@mikesarahmccourts6509]

Your 20 hp off

[@edwingarcia3511]

SUPER LOW POWER FOR A 520 BUILD.

[@koreypupin1930]

My 7mil makes more lol