Found at a Home Depot in Birmingham. They’re all actually three drawer units, but Ridgid kept the spacing and slides so you can mix and match the drawers to make any configuration you need. Awesome. I’m working on a cover to have a giant single drawer for larger tools.
The smartest thing Ridgid did was making the drawers compatible with the wheel kit. To have drawers in the middle of a stack, and have to remove them to open the bottom box is just a bad design. I was ready to dump all my Ridgid boxes for Stacktech system with drawers, but this one feature may change my mind.
Hes showing it so im going to buy the boxes i want today hopefully they have the drawers if not ill wait but they dont have them on website not even coming soon
These have a handle area up top? Looks like there’s something not sure it’s enough bite to carry a fully loaded box. Don’t understand why they can’t make a top carry handle for these
Finally, I picked one up. They don't show them on their websights and they are too heavy. They need a small unit like drawer for the middle set-up. Going up and downstairs, you need portability, then click together to roll into apartments. Unless you're the Incredible Hulk 💪😅
@@brodycast1652 Hey man, thanks for your advice. Went to HD yesterday asked the manager and they had them. Why they’re not displayed I have no ideas. Bought me 2 of the 3 drawers & dolly.
The drawer rails pull free from the tabs they're in. Grab the front of the rail with some vice grips pull hard & they come out. DO NOT PRY you will break the tab housing the rail goes in
The two drawer doesn’t exist. You have to make it by purchasing 2 boxes, then swapping drawers between the boxes. Check out my other videos on how to do it.
Just scooped 2 the other day saw them first in Brooklyn, came home to Jersey to find each store only received 4 for the holidays and some were still on the truck, found them on the tippy top shelf still in cardboard, had no idea you can move the drawers around, would love to see how you did it feel like id end up breaking something...
It snaps closed. Has tension piece inside the bar mechanism. Stays open out of the way. Drawer cannot be opened even if you only have one side locked. There is a place for a padlock on the right mechanism.
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
Found at a Home Depot in Birmingham. They’re all actually three drawer units, but Ridgid kept the spacing and slides so you can mix and match the drawers to make any configuration you need. Awesome. I’m working on a cover to have a giant single drawer for larger tools.
The smartest thing Ridgid did was making the drawers compatible with the wheel kit. To have drawers in the middle of a stack, and have to remove them to open the bottom box is just a bad design. I was ready to dump all my Ridgid boxes for Stacktech system with drawers, but this one feature may change my mind.
Hes showing it so im going to buy the boxes i want today hopefully they have the drawers if not ill wait but they dont have them on website not even coming soon
If only I did not have to buy the bottom box just to get the wheels
@@minimonkeyplay u didnt have to but cost of wheels alone might as well buy box
@@immachine1565 I guess so the slightly smaller box is 60$ so the larger bottom box should cost 80$ alone and the wheels would cost 40$ alone.
I've started to see the three drawer unit only in stores and after checking them out they are totally worth it high quality heavy duty box
Hi are they compatible with the old boxes ? I see you have some next to these like can you stack amd integrate the old boxes with the new?
These have a handle area up top? Looks like there’s something not sure it’s enough bite to carry a fully loaded box. Don’t understand why they can’t make a top carry handle for these
I'm pretty sure mine has a handle on the top. It's a built in handle not one that flips up.
Finally, I picked one up. They don't show them on their websights and they are too heavy. They need a small unit like drawer for the middle set-up. Going up and downstairs, you need portability, then click together to roll into apartments. Unless you're the Incredible Hulk 💪😅
Now these drawer sets by ridgid are almost worth using for power tools
Can you make the 4 drawer a 3 drawer or is it impossible
Waiting on it for my truck
Price? First I’ve heard of these.Oh I see pic of them posted back in august.HD web sight says not available.$119
Would you happen to know the SKU or model number?
Why can’t I find them. Link to purchase please. Thank you!
Go in and ask they haven’t put them on the shelves but they’re there
@@brodycast1652 Hey man, thanks for your advice. Went to HD yesterday asked the manager and they had them. Why they’re not displayed I have no ideas. Bought me 2 of the 3 drawers & dolly.
How did you move the slides from one box to another box to make a 4 drawer?
Releasing a video tomorrow showing the process
The drawer rails pull free from the tabs they're in. Grab the front of the rail with some vice grips pull hard & they come out. DO NOT PRY you will break the tab housing the rail goes in
@@lajuanjohnsonbtc9634 awesome thank you, just did it and created a 2 drawer/4 drawer set. This is awesome.
Still not here in Wisconsin 😢...
Birmingham? You wouldn’t happen to know the store number of the HD you purchased them by any chance?
Dang and you also have the toughbuilt ?!
There in Michigan too but they're pricey
$119 ain’t a bad price compared to Milwaukee, Dewalt, flex, and Stacktech.
I like mine so far. I got the cart and box and 3 drawer box for 236$
Oh Yay! How high is the 2 drawer?
16”
Yeah they're at the Home depot in hoover alabama
Hey I cant find anything about the 2 drawers online at all. Not even a single picture on google. Did they disappear
The two drawer doesn’t exist. You have to make it by purchasing 2 boxes, then swapping drawers between the boxes. Check out my other videos on how to do it.
@@donniestoolthoughts9209I just ordered a two drawer today. It arrives in 2 days.
Just scooped 2 the other day saw them first in Brooklyn, came home to Jersey to find each store only received 4 for the holidays and some were still on the truck, found them on the tippy top shelf still in cardboard, had no idea you can move the drawers around, would love to see how you did it feel like id end up breaking something...
I had the same experience
Any chance you can tell me internal dimensions?
How good is the locking mechanism?
It snaps closed. Has tension piece inside the bar mechanism. Stays open out of the way. Drawer cannot be opened even if you only have one side locked. There is a place for a padlock on the right mechanism.
It looks like it’s gonna tip over
You are correct.. Too shallow. Milwaukee is wider to help keep it from falling over. More coins but better design.
Anyone got the price on each would really like to get these forthr right price
$119
Ridgid only makes a 3 drawer one. You have to buy several to reconfigure them to make a 2 or 4 drawer unit.
Do they come with wheels?
No, box only