Waiting on my 10 to come in from BAM. Can't wait to get it installed. Currently a 30d deliver time. Also, anyone wanting excellent customer service with your purchase, Keith at Dirty Deeds is awesome with calls and texts. Will let you know how my install goes. Thanks for the video.
@@m1stells261 the experience i had and am still having even with the 12” is that im getting a lot of deep,bass-ey,vibrating noise in the cabin at lower speeds/rpms. Basically it goes away if u get up to 65-70mph. But up until then there is some drone even with the resonator. Im going to message dirty deeds about it.
@@m1stells261 actually i think i had exhaust leak causing more drone. The stock bolts came loose i had to replace them and the stock gaskets were shot so i replaced bolts and gaskets with different ones and ive got the stock exhaust back on. Honestly i miss how the 8” sounded at WOT. Im tempted to swap my 12 thats just sittinf in the box for the 8 again to see if theres any drone with the new gaskets
Can the resonator be welded vs bolted? Heard people have had issues with either over tightening and crunching the exhaust or it just loosing in up and sliding down.
Nice shop, a great install, videagraphy excellent information for your viewers. Only one gripe and it minor, don't use a wood hammer on hard metals (center punch) most nails are soft metal that will bend and not pose a chipping eye hazard. Cheap claw hammers can chip . Use a ball peen hammer instead.
Waiting on my 10 to come in from BAM. Can't wait to get it installed. Currently a 30d deliver time. Also, anyone wanting excellent customer service with your purchase, Keith at Dirty Deeds is awesome with calls and texts. Will let you know how my install goes. Thanks for the video.
You have a formidable shop!
Great video, thank you for post and your efforts.
Very nice. I had 8” bamuffler but wanted a little less interior noise so im waiting on a 12” to arrive now. Cant beat dirty deeds products amnd cs
Is the 8" obnoxious in the cab across the rpm range? Have you installed the 12" yet? Any change in drone?
@@m1stells261 the experience i had and am still having even with the 12” is that im getting a lot of deep,bass-ey,vibrating noise in the cabin at lower speeds/rpms. Basically it goes away if u get up to 65-70mph. But up until then there is some drone even with the resonator. Im going to message dirty deeds about it.
@@balkee42 Any input from Keith yet?
Stock my 2021 Tubdra droned. Put a Borla Touring on and it drones the same at a certain RPM/load.
@@m1stells261 actually i think i had exhaust leak causing more drone. The stock bolts came loose i had to replace them and the stock gaskets were shot so i replaced bolts and gaskets with different ones and ive got the stock exhaust back on. Honestly i miss how the 8” sounded at WOT. Im tempted to swap my 12 thats just sittinf in the box for the 8 again to see if theres any drone with the new gaskets
Wow I love that sounds pretty cool
Thanks for the video , do you still like it ? Any issue with resonator loosing up ?
What bumpers are those and where to get them from
They look great
Do you know how long the resonator is? Looking into this set up?
Can the resonator be welded vs bolted? Heard people have had issues with either over tightening and crunching the exhaust or it just loosing in up and sliding down.
Just tighten then try to move it around until it’s perfect
So what is 10”, the diameter of the mufflers or the length of them.
No drone at 60 mph?
Did you install Catalytic Converter Shield Guard? I did the same as my 2015 Toyota Tundra
I did, cat theft is rampant in my city.
Nice shop, a great install, videagraphy excellent information for your viewers. Only one gripe and it minor, don't use a wood hammer on hard metals (center punch) most nails are soft metal that will bend and not pose a chipping eye hazard. Cheap claw hammers can chip . Use a ball peen hammer instead.
Hey sir I would like Purchased that exhaust do you have a link for it I check the description but it's only for your cameras?
What rear bumper is that?
Drone?
Absolutely no drone. Great exhaust.
What color truck is this? Inferno?
Radiant Red.
Those aren't adjustable wrenches.....
I think the flowmaster super 10’s sounds the best for the tundra’s
Gross
Do yourself a favor and just use straight thru mufflers. They sound so much better. Not that chambered crap