I cannot thank you enough. I've been searching the internet all throughout trying to find a way to get back to stock OOS from a custom ROM. I followed a few XDA forum tutorials, but most of them assume you have a lot of prior knowledge, which is where everything went wrong... Phone got stuck in a bootloop which I couldn't figure out how to fix. Your video is my saving grace, Short, clear and to the point. Your channel deserves all the growth!
Dude you literally saved my phone. I simply cannot thank you enough for making this video. Online guides we're riddled with random sketchy links and vague instructions. Your work with providing the DL links was so incredibly helpful. Thank you again.
Thank you very much, you saved me with your tutorial. I had a test sample of 9 Pro and nothing was working correctly before I followed your steps. Now it's supreme.
i have no words to say thank you....i had spent so much time searching for the solution but finally your video saved my op7.....thanks a lot bro.....great job.....and attached links are working fine....just because of that i was able to download proper files....
My phone isn't bricked, working normally on stock rom with root. I just wanna fallback to clean state (unrooted and locked), can I use this MSM method too? I love your way of explaining, makes it much easier.
Did nobody else have any problems with the phone constantly dropping the EDL connection for just a moment, but each time the software detected a momentary drop, the software started over.... I had to do it ~10 times before it survived 300 whole seconds without a drop!
Ive done this but i get the android screen and then the phone cuts off EDIT: now its stuck with the message: Download Failed!!! Please check your download flow is right.
I did this and it managed to download the image to the phone but the phone still freeze when booting up. Was it not just a brick and the phone is fried somehow? There's no visual damage that would indicate that the phone is broken. I tried several times and both with OOS 10 and OOS 11, with wiping everthing in recovery mode after and also tried without doing so.
if i'm able to get vibration from my notification rocker switch and able to hear the charging sound when I plug in the charger. assuming my screen is just dead not hard brick?
I was wondering how to register a account in msm download tool because my I was trying to root my Realme 6pro and later on "the current image have been destroyed and can not boot. please flash the correct image or contact customer service to fix it" showing on my screen
Unfortunately it looks like the Realme's can be a bit more complicated This page has some steps to fix it though www.droidwin.com/fix-the-current-image-boot-recovery-have-been-destroyed/
Have a check here forum.xda-developers.com/t/automatic-detection-of-ddr-failed.4474679/ One of the suggestions is to disable your network and change your PC date to Dec 2018 Good luck
Bummer, how about: www.reddit.com/r/OnePlus8T/comments/jioz99/oneplus8t_bricked/? OP fixes by flashing via a payload dumper instead. Another poster mentions using the MSM for international
It's often a cable or driver related issue Have a look through this discussion on the issue xdaforums.com/t/urgent-help-with-the-msm-tool-stuck-in-param-preload.3971363/
Hello! I have a bricked (total black screen) OnePlus 9 LE2115. Trying to use the MSM Global tool, it tells me, "Device not match image". I'd love to fix it without having to send it in for a repair.
LE2115 should be global from what I can see Double check your image against here: forum.xda-developers.com/t/global-oneplus-9-msm-tool-updated.4284779/ Also check out the target dropdown if you need to select anything there
Get I'm looking for the 8t files it says unavailable on the first website and the second website only has links from 7t go down where can I find the for the 8t TMobile version
Try this one forum.xda-developers.com/t/op8t-oos-kb05aa-ba-da-unbrick-tool-to-restore-your-device-to-oxygenos.4180837/ Have also added this to the description links
Assuming you already have drivers and everything connects, that should be it The tool has the file you need, as you should be finding the tool specifically for your device
GM21 XX looks to be US Not sure of the consequences as it is a slightly different OS build GM21AA is the Global/India version that should be used on a GM1911 device
i cannot get the phone into EDL mode, drivers look like they have installed, but MSM doesn't seem to see the device as doesn't say connected. I'm using the original cable and tried other ports too. any ideas?
I had a bit of a search and was unable to find anything unfortunately If it's still around, I expect it would be on XDA somewhere - but it's preeeety old now 😅
Thanks for the video! I'm having one small issue... After I extract the Zip file for my OnePlus 8T and I don't see the .exe file anywhere to launch the tool all other files are there though. I tried downloading from 2 different sources but it's the same. Am I doing something wrong?
@@FilthyCasualTech Thanks for replying. Yes same link. But I figured out it was my antivirus program putting the .exe file on quarantine. After turning it off I was able to successfully downgrade from Android 14 (latest OTA) to the original Android 11.
Can you help me? I'm tired of trying and now my phone is stuck on Fastboot mood There is no recovery on the phone Nothing just goes to Fastboot And I can't enter edl mod What do I do with my OnePlus 7T Pro?
I would make sure you've looked over this forum xdaforums.com/t/bricked-stuck-in-fastboot-and-cant-boot-into-edl.4037137/ Basically: Try and install recovery from fastboot Otherwise, try EDL, ensuring you're holding down the buttons until it begins the process
@@FilthyCasualTech Now the device is stuck on fastboot I have an Android ROM for my Android 12 phone I want to flash via adb Rom zip I will write fastboot flash Then paste rom
Yesterday, I saw your pixel experience installation video for oneplus 7 pro. then flash that rom successfully. Then today, I was want to go back to stock rom. so I used this MSMTool. I have used msm tool before with proper qualcom driver. So today, during flash stock rom by MSMTool, it shows an error in middle of the process. Which was related to flashing System.img at 34%. so after 10 minutes of stuck. i had remove the phone from pc. After removing My device has not turing on. It was showing nothing. No charged Response, no logo anything. Then now when I'm trying to connect it to pc by cable and pressing voulme up and Down, windows says, USB device not recognise. I've tried many times on different pc. But it shows same error. Is there any solution? How can I connect my phone edl mode with pc using qualcom diagonostic? Or my phone is completely dead?
Yeah, not the greatest site links unfortunately Check here for the 8Pro forum.xda-developers.com/t/op8pro-oos-11aa-ba-da-unbrick-tool-to-restore-your-device-to-oxygenos.4084953/
Hey friend, but to flash, don't you need an authentication username and password???for the msmdonwloadtool.?? I have a dead one plus 10 pro that only gives a qualcom 9008 port. I was updating it with my wifi and it turned off and does not turn on how do I recover it?
Unfortunately I don't believe there are widely released versions of this for the 10Pro I have seen this guide to possibly working around it, or further down there is talk of the EDL Flash tool instead www.droidwin.com/bypass-login-msm-download-tool-oneplus-10-pro/
Which ones did you get? The link should take you to a page talking about Qualcomm HS-USB QDLoader 9008 Drivers - install links (either manual or automatic) are about half way down If you've played around with fastboot before, you may already have drivers installed
@@FilthyCasualTech this is my first time going with the fastboot . i have downloaded one driver from OnePlus community website which has size of 23.11MB and other from your link which has size of 11.52MB now I am confused which one should I go with ?
Hey mate! I'm trying to revert back from ColorOS 12 to OOS 11 on my Oneplus 8 Pro but after trying everything, the Qualcomm driver doesn't pop up and MSM doesn't detect my phone. Do you know what's the solution?
Heya, I found the process pretty confusing. How did you go putting it into EDL mode? The phone screen shouldn't change but this would be the only time the driver gets picked up
Thanks.. Is there any known issue with Qualcomm drivers with Windows 11? I have tried many drivers from internet but whenever I go to EDL mode, there is a warning around Qualcomm driver in Device Manager, and I am unable to start the process.
Been having a look through and I can't see anything specific for Windows 11 yet, so I'm unsure unfortunately Admittedly I am still on Windows 10 on my main PC Does it give you more detail for the error?
@@FilthyCasualTech Hi Sir! I have a same problem while connecting device in EDL mode there is small warning sign in device manager ports menu. I checked the error and it states as: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52) Please help if you can! or should I redo this on windows 10 pro?
I'm still on Windows 10, so haven't seen the issue But sounds like ensuring you have Win11 compatible drivers if possible Otherwise try on Win10 if you can
currently using oneplus 6 with lineage os 13, now it's in crashdump mode, and bootloader is locked, can you please suggest something to fix it ? (adb is not working)
Not with MSM, you would usually only see older builds on that as it's more of a recovery tool. You would need to OTA, Local update or install another way
@@FilthyCasualTech currently I'm on the custom ROM. So it's working steps for me? 1. Flash stock OxygenOS with MSM 2. Flash ColorOS via recovery Does 7 has B-slot or just A?
I would try to use faarboot to install stock if you can find a download of it Without a proper MSM tool, you would need to contact Oneplus support to try and fix it unfortunately
It depends on what you download There are some links in the description that have OnePlus Models and OxygenOS versions. The 7Pro has options for OxygenOS 9, 10 and 11
@@FilthyCasualTech also last question sir, My firmware is a global version and is it okay to install the same firmware but a different region or manufacturer?
Assuming it follows the same trends as OnePlus devices - you should just ensure you get the appropriate download for your device, matching the model number (eg. RMX3511 being a Realme C35)
OnePlus doesn't look to have made this available for the 10 Pro, with talk that they might never. Fastboot Enhance appears to be the tool of choice for the 10 Pro
Thanks man it was me asking if it was possible to flash another rom through aospa recovery I just got my hands on an old oneplus 5t and will try this when I’m home from work just to practice before trying it on my oneplus 7 pro (limited edition almond)
ahh right - yep, fair enough haven't used Paranoid Android so couldn't comment on flashing. Always a risk when using competing stuff, but at least it can generally be recovered if it goes bad. That said, I have previously used Pixel Experience Recovery to install LineageOS
Have a read of this one community.oneplus.com/wap/thread/1524920 Basically running an ADB command to disable the OnePlus updater. If you're a bit uncomfortable with that, you should be able to do it through the Universal Android Debloater tool, which I have a video on too
Hello... I get a dead oneplus 9 now... dont know if I didnt follow the guide correctly... but after I click start, then red command appears... Just let em move because I didnt have any option to restart the operation... but nothing changes until I get this dead oneplus 9... now, is there anything I can do for my oneplus 9??? please help me 😭😭😭
Did you have any errors appearing? Make sure it's in the proper mode and that you have the proper download. MSM should be able to revive just about any bricked device that doesn't have hardware related damage.
@@FilthyCasualTech yes... red command appears just after I clicked start... then its stays until about half a day, then I found out that my device didnt work anymore
I cannot thank you enough. I've been searching the internet all throughout trying to find a way to get back to stock OOS from a custom ROM. I followed a few XDA forum tutorials, but most of them assume you have a lot of prior knowledge, which is where everything went wrong... Phone got stuck in a bootloop which I couldn't figure out how to fix. Your video is my saving grace, Short, clear and to the point.
Your channel deserves all the growth!
Really glad to hear you were able to get things back on track - happy to help!
Dude you literally saved my phone. I simply cannot thank you enough for making this video. Online guides we're riddled with random sketchy links and vague instructions. Your work with providing the DL links was so incredibly helpful. Thank you again.
Glad you found it helpful!
Hopefully get a bit more life from your device 😁
Hello, Thank you for helping me to Unbrick my Oneplus 9r, I've been spending my entire day and almost obliterate all indians videos.
Thank you very much, you saved me with your tutorial. I had a test sample of 9 Pro and nothing was working correctly before I followed your steps. Now it's supreme.
Thanks dude, i spent way too much time on this and you just saved me.
Thanks a ton man. i tried lot of options and finally your solution made my onplus6t restored back to stock rom from lineageos20
The reason that makes me watching this video is to how to know EDL mode disconnects itself😁 Thanks dude.
Glad you found it helpful!
Did you manage to get everything flashed in the end?
@@FilthyCasualTech It’s worked finally, My phone gets back ❤️
😍😍😍
Thanks !, I was bugged on trying to flash my 1+ 7 Pro to international and I was missing a few things your vid helped a ton.
Really happy to hear that it helped! 😍
Ur my absolute goat dude, HUGELY appreciate you making this video!!
😍😍😍
i have no words to say thank you....i had spent so much time searching for the solution but finally your video saved my op7.....thanks a lot bro.....great job.....and attached links are working fine....just because of that i was able to download proper files....
Really happy to hear this was useful for you!
Enjoy and keep that Oneplus 7 alive!
Great guide, I did this before but forgot the steps, this had all the info I needed
My phone isn't bricked, working normally on stock rom with root. I just wanna fallback to clean state (unrooted and locked), can I use this MSM method too?
I love your way of explaining, makes it much easier.
The general preference is to do it manually - flash OOS > lock bootloader
But MSM will get you the desired outcome too
@@FilthyCasualTech thanks mate
I've an issue....After Devices recognized on windows... the devices can't power on and the msm tools doesn't open even i reboot the pc..why?
Could you try a different MSM file?
When double clicking it, mine often takes a few minutes to open
@@FilthyCasualTech Yes I tried different version too... but the problem is the same..
Great video!
Thanks so much, it really helped me out
Did nobody else have any problems with the phone constantly dropping the EDL connection for just a moment, but each time the software detected a momentary drop, the software started over.... I had to do it ~10 times before it survived 300 whole seconds without a drop!
yo
when bootin to edl mode the phone goes to chargin mode
how should this work ???
Yeah, I had this happen - make sure you're holding down the buttons as you plug it in
As soon as I let go it went to charging mode
I ran into an issue on the MSMDownloadTool: Sahara Communication Failed, please try again. I am not sure where to go from here
Using a different USB port sometimes works
Otherwise check out this post
forum.xda-developers.com/t/msm-tool-sahara-communication-failed.4363803/
You just helped me save my Oneplus 8 pro Thank you
You are an absolute lifesaver!
I'm in the last step and I keep getting the "sahara communication failed" on the MSMtool it's driving me nuuuts. Anyone with a suggestion or fix?
It's an odd one
Suggestions I've seen online are to try different USB cables, a different USB port or a different Windows device entirely
i am on the oneplus 7t pro and i'm getting sahara communication error. This is my only device and i'm stuck please help
Have a look through this page, has a few options to try
www.droidwin.com/fix-sahara-communication-failed-error-msm-download-tool/
@@FilthyCasualTech I have the same problem and nothing of this solve it.
Ive done this but i get the android screen and then the phone cuts off
EDIT: now its stuck with the message: Download Failed!!! Please check your download flow is right.
Please help. Drivers ok - can see com5. But MSM always in NA status. Did reboots, different cables, test mode for pc. Nothing. Any suggestions?
I did this and it managed to download the image to the phone but the phone still freeze when booting up. Was it not just a brick and the phone is fried somehow? There's no visual damage that would indicate that the phone is broken. I tried several times and both with OOS 10 and OOS 11, with wiping everthing in recovery mode after and also tried without doing so.
Hello please help me I have a phone one plus 10T 5g global Stuck in Edl
How do i change my firmware from Indian to EU Firmware. I am using the OnePlus Nord 1st Gen. can you guide me how to do it?
if i'm able to get vibration from my notification rocker switch
and able to hear the charging sound when I plug in the charger.
assuming my screen is just dead not hard brick?
Unclear, but does sound functional
Have had no screen response before due to a failed load - could still be worth trying to wipe things
Why I can’t get this my op7t
I also try to enter edl mode it’s nothing happen on msm tool
Please help me
I was wondering how to register a account in msm download tool because my I was trying to root my Realme 6pro and later on "the current image have been destroyed and can not boot. please flash the correct image or contact customer service to fix it" showing on my screen
Unfortunately it looks like the Realme's can be a bit more complicated
This page has some steps to fix it though
www.droidwin.com/fix-the-current-image-boot-recovery-have-been-destroyed/
@@FilthyCasualTech I followed that yesterday step by step still not working.
Thanks!! i can say for a fact this saved me a few Dabloons
Download links not working for me can some mirror it?
Both links are opening for me - was there a specific build that's not working?
@@FilthyCasualTech OnePlus 7 pro Android 11 version and other site doesn't have the A11 version
For my 7TPro, I have always used the 10 version - then updated to 11 via OTA
Upside for this is it should hit both slots
@Filthy Casual Tech I can't download the OnePlus 8T MSM tools. Does the link work for you?
Hmmmm, odd
Try this one
forum.xda-developers.com/t/op8t-oos-kb05aa-ba-da-unbrick-tool-to-restore-your-device-to-oxygenos.4180837/
I have facing a prblm .... Automatic detection of DDR failed error show in my OnePlus 8t when using MSMTOOLS. How to rectify?
Have a check here
forum.xda-developers.com/t/automatic-detection-of-ddr-failed.4474679/
One of the suggestions is to disable your network and change your PC date to Dec 2018
Good luck
@@FilthyCasualTech i tried but failed 😔
Bummer, how about:
www.reddit.com/r/OnePlus8T/comments/jioz99/oneplus8t_bricked/?
OP fixes by flashing via a payload dumper instead.
Another poster mentions using the MSM for international
Excellent video direct to the point.
If you get an error on super.img toggle light firehouse in the top right
Hello there, i tried all the process but during flashing in msm, the process stops in param preload
What could be the possible solutions for it??
It's often a cable or driver related issue
Have a look through this discussion on the issue
xdaforums.com/t/urgent-help-with-the-msm-tool-stuck-in-param-preload.3971363/
thanks for the easy tutorial this saved me an buck
Hello! I have a bricked (total black screen) OnePlus 9 LE2115. Trying to use the MSM Global tool, it tells me, "Device not match image". I'd love to fix it without having to send it in for a repair.
LE2115 should be global from what I can see
Double check your image against here: forum.xda-developers.com/t/global-oneplus-9-msm-tool-updated.4284779/
Also check out the target dropdown if you need to select anything there
Get I'm looking for the 8t files it says unavailable on the first website and the second website only has links from 7t go down where can I find the for the 8t TMobile version
Try this one
forum.xda-developers.com/t/op8t-oos-kb05aa-ba-da-unbrick-tool-to-restore-your-device-to-oxygenos.4180837/
Have also added this to the description links
@@FilthyCasualTech thanks very much you get a sub
After downloading msm tool what others things I have to download?
Assuming you already have drivers and everything connects, that should be it
The tool has the file you need, as you should be finding the tool specifically for your device
Hey bro, i have a gm1911 device, the website shows gm21xx so, can i flash the gm21xx file without any consequences?
GM21 XX looks to be US
Not sure of the consequences as it is a slightly different OS build
GM21AA is the Global/India version that should be used on a GM1911 device
i cannot get the phone into EDL mode, drivers look like they have installed, but MSM doesn't seem to see the device as doesn't say connected. I'm using the original cable and tried other ports too. any ideas?
It really sounds like a driver issue still, they can be very finicky unfortunately
@@FilthyCasualTech it was drivers I managed to fix this 👍
Hello
I'm also having problems with my Oneplus One. Do you (anyone) have a download link for msm and rom aplicabile to Oneplus One?
Thank you.
I had a bit of a search and was unable to find anything unfortunately
If it's still around, I expect it would be on XDA somewhere - but it's preeeety old now 😅
Thanks for the video! I'm having one small issue... After I extract the Zip file for my OnePlus 8T and I don't see the .exe file anywhere to launch the tool all other files are there though. I tried downloading from 2 different sources but it's the same. Am I doing something wrong?
It should be there
Are you getting it from here: xdaforums.com/t/op8t-oos-kb05aa-ba-da-unbrick-tool-to-restore-your-device-to-oxygenos.4180837/
@@FilthyCasualTech Thanks for replying. Yes same link. But I figured out it was my antivirus program putting the .exe file on quarantine. After turning it off I was able to successfully downgrade from Android 14 (latest OTA) to the original Android 11.
Can you help me? I'm tired of trying and now my phone is stuck on Fastboot mood There is no recovery on the phone Nothing just goes to Fastboot And I can't enter edl mod What do I do with my OnePlus 7T Pro?
I would make sure you've looked over this forum
xdaforums.com/t/bricked-stuck-in-fastboot-and-cant-boot-into-edl.4037137/
Basically:
Try and install recovery from fastboot
Otherwise, try EDL, ensuring you're holding down the buttons until it begins the process
@@FilthyCasualTech Now the device is stuck on fastboot I have an Android ROM for my Android 12 phone I want to flash via adb Rom zip I will write fastboot flash Then paste rom
Whats Google cam i need uninstall for stability
link OnePlus 9R MSM Download Tool is died. pls update. thank you vr much
Have added some links
Try forum.xda-developers.com/t/oneplus-9r-oxygen-os-india-msmdownloadtool.4268431/
If someone get their IMEI erased by using SMT mode and have no backup of their IMEI, what options do they have?
It doesn't look great - I can see some limited options here
forum.xda-developers.com/t/what-is-smt-download-really.4185203/
where i can find firmware files on OP9 european model? first link didn't work and second didn't have proper firmware.
Looks like someone modified a file here, use caution etc.
forum.xda-developers.com/t/one-plus-9-eu-msm-tool-tested.4373633/
sir, i was looking for tool to flashing oppo r17 cph1879 qualcom 670. what msmdonloadtool version supose to be i use??
thnx
I would have a look at this link
romprovider.com/cph1879-oppo-r17-support/
Yesterday, I saw your pixel experience installation video for oneplus 7 pro. then flash that rom successfully. Then today, I was want to go back to stock rom. so I used this MSMTool. I have used msm tool before with proper qualcom driver. So today, during flash stock rom by MSMTool, it shows an error in middle of the process. Which was related to flashing System.img at 34%. so after 10 minutes of stuck. i had remove the phone from pc. After removing My device has not turing on. It was showing nothing. No charged Response, no logo anything. Then now when I'm trying to connect it to pc by cable and pressing voulme up and Down, windows says, USB device not recognise. I've tried many times on different pc. But it shows same error. Is there any solution? How can I connect my phone edl mode with pc using qualcom diagonostic? Or my phone is completely dead?
Is this a similar situation?
Hopefully something helpful there
forum.xda-developers.com/t/cannot-unbrick-cannot-enter-edl-mode.4148589/
I am using pixel experience can directly install another custom rom like kosp or I have to go back to oxygen and than install kosp rom
Generally should be able to - if you have issues though drop back to OOS first
He is a saviour 🙏🏻
Hi! I am trying to go from Color OS 12 China ROM to Oxygen OS 11 Global ROM. Is it fine to do it through this method?
This should be fine, it's the way I would use to swap to global
Links on the first site seem to be all broken, and the secondary site doesn't have any link for the oneplus 8 pro device.
Yeah, not the greatest site links unfortunately
Check here for the 8Pro
forum.xda-developers.com/t/op8pro-oos-11aa-ba-da-unbrick-tool-to-restore-your-device-to-oxygenos.4084953/
Hey friend, but to flash, don't you need an authentication username and password???for the msmdonwloadtool.?? I have a dead one plus 10 pro that only gives a qualcom 9008 port. I was updating it with my wifi and it turned off and does not turn on how do I recover it?
Unfortunately I don't believe there are widely released versions of this for the 10Pro
I have seen this guide to possibly working around it, or further down there is talk of the EDL Flash tool instead
www.droidwin.com/bypass-login-msm-download-tool-oneplus-10-pro/
I have downloaded two Qualcomm drivers which one should I use?
Which ones did you get?
The link should take you to a page talking about Qualcomm HS-USB QDLoader 9008 Drivers - install links (either manual or automatic) are about half way down
If you've played around with fastboot before, you may already have drivers installed
@@FilthyCasualTech this is my first time going with the fastboot . i have downloaded one driver from OnePlus community website which has size of 23.11MB and other from your link which has size of 11.52MB now I am confused which one should I go with ?
See if you can tell which is more recent
As long as it's the right driver, it should be fine to try and see if your PC recognises your device
Thanks Man its working.
Sir my OnePlus 8 pro have right now green line what can i do?
What do you mean by green line?
Is it the OS, or is the screen busted?
Hey mate! I'm trying to revert back from ColorOS 12 to OOS 11 on my Oneplus 8 Pro but after trying everything, the Qualcomm driver doesn't pop up and MSM doesn't detect my phone. Do you know what's the solution?
Heya, I found the process pretty confusing.
How did you go putting it into EDL mode?
The phone screen shouldn't change but this would be the only time the driver gets picked up
Just connect the phone, then go to windows updates and into optional ones and download those Qualcomm and google drivers that pops up
Thanks..
Is there any known issue with Qualcomm drivers with Windows 11? I have tried many drivers from internet but whenever I go to EDL mode, there is a warning around Qualcomm driver in Device Manager, and I am unable to start the process.
Been having a look through and I can't see anything specific for Windows 11 yet, so I'm unsure unfortunately
Admittedly I am still on Windows 10 on my main PC
Does it give you more detail for the error?
@@FilthyCasualTech Hi Sir!
I have a same problem while connecting device in EDL mode there is small warning sign in device manager ports menu. I checked the error and it states as:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Please help if you can! or should I redo this on windows 10 pro?
I'm still on Windows 10, so haven't seen the issue
But sounds like ensuring you have Win11 compatible drivers if possible
Otherwise try on Win10 if you can
@@TayyabHameed-r6c all you gotta do is enable test mode for windows - can be done either from the terminal or from the recovery menu on windows
Hi. Just wanted to ask , will I be able to get my old data back or will everything be formatted? TIA
It will be formatted, so make sure to keep backups
currently using oneplus 6 with lineage os 13, now it's in crashdump mode, and bootloader is locked, can you please suggest something to fix it ? (adb is not working)
You should still be able to use the MSM tool to recover this, as EDL mode is separate to ADB
You will lose your data though
Can I flash ColorOS 12.1 to 1+7 (not Pro, not T) via MSM? If so, can you please tell few words about any possible special cases (if any)?
Not with MSM, you would usually only see older builds on that as it's more of a recovery tool.
You would need to OTA, Local update or install another way
@@FilthyCasualTech currently I'm on the custom ROM. So it's working steps for me? 1. Flash stock OxygenOS with MSM 2. Flash ColorOS via recovery
Does 7 has B-slot or just A?
While im flashing the rom on this msm tool im getting error call param is failed i dont know how to flash the rom 😟
Param preload?
Everything I can see online seems to point to an issue with the Qualcomm driver, making sure you have the latest installed
@@FilthyCasualTech okay bro tq I'll try to install latest Qualcomm drivers if it's works I'm happy tq buddy 🥰
Liked! Commented and Subscribed!
😍😍😍
oneplus 9rt is not in the list... which tool should i download
I've been looking around, and it doesn't look like it's currently available for the 9RT 😭
Links for oneplus 7 pro android 11 don’t work. Do you have an other one ? Thanks in advance
I recommend using the A10 ones instead, then updating via OTA
(It's what I do for my 7TPro)
Can you download the msm tool on Chromebook running linux??
I don't believe so - there may be other methods though, as I can see some discussion on using Linux to unbrick devices
that is work on oneplus 10 pro 2213
After the Oneplus 9, they started locking things down - so unless it gets cracked it's a no go
@@FilthyCasualTech bro my oneplus 10 pro is stuck on fast boot when i want install twrp how can i back to oxygen os can u help me Thanks
please help me
I would try to use faarboot to install stock if you can find a download of it
Without a proper MSM tool, you would need to contact Oneplus support to try and fix it unfortunately
Is Msm tool for oneplus 10 pro?
Which OOS does the phone revert back to in this specific MSM tool?
It depends on what you download
There are some links in the description that have OnePlus Models and OxygenOS versions.
The 7Pro has options for OxygenOS 9, 10 and 11
thanks man saved my life!!
Is there a way I can do this and still save my files?
Unfortunately not
@@FilthyCasualTech i figured it out after many days of researching and trying 🤦
is there an MSM tooll for the Oneplus 11 ?
Not that I've seen with a brief search - the later OnePlus devices look to have clamped down on MSM
Is there any way to recover files on device with this.
Not that I'm aware, no
all links for oneplus 6 not working .. do you have other links ?
Yeah, that host is a bit flaky
Try here - forum.xda-developers.com/t/op6-latest-10-3-8-collection-of-unbrick-tools.3914109/
You have link for one plus 10 T?
Unfortunately, as far as I can tell, it doesn't exist :(
Applicable for Realme devices?
Yeah, this is also used by some Realme devices
I haven't used any Realme devices though, so didn't want to include them in case of any differences
@@FilthyCasualTech okay sir, but is it safe to use for us realme devices?
@@FilthyCasualTech also last question sir,
My firmware is a global version and is it okay to install the same firmware but a different region or manufacturer?
Assuming it follows the same trends as OnePlus devices - you should just ensure you get the appropriate download for your device, matching the model number (eg. RMX3511 being a Realme C35)
Ia flashing make earse all data?
Yep
Will this work Nord n30 5g ?
Not from what I can see
You can search XDA for unbrick methods though if required
You, Sir, are a lifesaver....!!!!
Glad you found it helpful!
Sir parm preload erroor is coming
Usually need to double check cables and drivers for this one
I would start again from scratch, possibly trying different drivers
Great Video bro😀
Thanks, appreciate it - hope you managed to get the download working :)
@@FilthyCasualTech Very much bro i enjoyed your video, very high quality and found msm tool of Android 11 which i was looking for long time
Can mcm tool be used on oos12?
Used to flash OOS12 ?
Not that I'm aware - it's usually done to revert to what a device started with, but it's painful for the 10Pro
10 pro?
Not available from my understanding :(
thanks you 🙏
is it compatible with 10 pro?
OnePlus doesn't look to have made this available for the 10 Pro, with talk that they might never.
Fastboot Enhance appears to be the tool of choice for the 10 Pro
@@FilthyCasualTech OnePlus never made anything available lol, these are leaked from service centres
Unsuported target o2 eror, oneplus 7t pro
Believe this is typically the wrong msm version used
you have to change the target to india
Thanks a lot Sir🙏🙏
Save my phone ♥ TBig thank's !
Really happy to hear! 😍
Thanks man it was me asking if it was possible to flash another rom through aospa recovery I just got my hands on an old oneplus 5t and will try this when I’m home from work just to practice before trying it on my oneplus 7 pro (limited edition almond)
I haven't used AOSP recovery to install another ROM before, I don't see it too often.
Practise on a non-daily driver is always prudent, good luck!
@@FilthyCasualTech Its aospa it's the paranoid Android recovery
ahh right - yep, fair enough
haven't used Paranoid Android so couldn't comment on flashing.
Always a risk when using competing stuff, but at least it can generally be recovered if it goes bad.
That said, I have previously used Pixel Experience Recovery to install LineageOS
Does this method erase user data? Or will things like pictures and text messages be preserved?
This will absolutely erase everything
Make sure you have a good backup before trying it
@@FilthyCasualTech Thanks for the quick reply. And thanks for making this video.
This video can help me at my place of work.
THANK YOU SO MUCH BRO LOL
I get : "unsupported target EU"
you have to change the target to india
Graciassss
Anyone this doesn't work for!!
If it fails, try an Intel based system, I have bad experience on AMD with this program. And also use USB 2
My system is an AMD - but understandable if there's been issues
For me it works perfectly fine on my Intel 8th gen laptop, but on my ryzen 5000 desktop it just doesn't work.
@@Maggashi Hey Thanks
Im, getting my OnePlus Tmpbile unlocked can converting it to global
Is it fine to keep it on 11 as I dont use phone much
It does look like there are some guides for this over on XDA - good luck!
@@FilthyCasualTech Yeah
The way that you have it is fine
For the MSM Tool
I selected OTHER when it started
That's fine?
Thanks!!!!!!!!!!!
I donwgraded my phone to oxygen os 10 becuase it is running the bes on my phone. How do I stop it from updating back to 11
Have a read of this one
community.oneplus.com/wap/thread/1524920
Basically running an ADB command to disable the OnePlus updater.
If you're a bit uncomfortable with that, you should be able to do it through the Universal Android Debloater tool, which I have a video on too
Hello... I get a dead oneplus 9 now... dont know if I didnt follow the guide correctly... but after I click start, then red command appears... Just let em move because I didnt have any option to restart the operation... but nothing changes until I get this dead oneplus 9... now, is there anything I can do for my oneplus 9??? please help me 😭😭😭
Did you have any errors appearing?
Make sure it's in the proper mode and that you have the proper download.
MSM should be able to revive just about any bricked device that doesn't have hardware related damage.
@@FilthyCasualTech yes... red command appears just after I clicked start... then its stays until about half a day, then I found out that my device didnt work anymore
thankyou so much