ive looked up so many fps guides for so many games, but after doing what you showed in this video, this 100% one of the best ones ive ever watched. game fps went from around 100-120 fps (more or less) to over 190-200+, graphics dont look TO good but im still tweaking my settings. THANKS
@@JusCysmic fedilityfx cas doesnt help with fps, just helps the game look better. i was getting low fps in warzone vondel (around the 100-120fps mark w/ ffx cas on low settings untouched config). i dont remember i was getting after in warzone but in multiplayer i was getting over 190-200+ with dlss on with edited config. i recently upgraded my cpu to a r7 5800x3d paired with my 3060ti and in FK i average around 180-200 sometimes peak at 250fps for a few seconds. yea i over exaggerated a bit and shouldve said in what game fps wise, shipment i would get around 150-190 never really reached 200, after looking at clips i was geting around 200fps in shipment runing around. i cant tell you the fps i get in vondel with my new cpu untill it comes back out - which is what will really tell me how much more fps i get now. r5 5600x 3060ti 32gb @3200mhz to r7 5800x3d 3060ti 32gb @3200mhz so fps now will be higher in warzone / multiplayer, i use DLSS ultra performance all low/off settings, the shoothouse map (the new small map) i get around 250-300fps , FK around 200fps with edited config in the video. so yes it DID help with my performance alot but i cant not tell you exactly the fps i got after. graphics look just as good with dlss on ultra performance then ffxcas on 100% strength. looking at ss of benchmark for multiplayer: 211 avg fps low 176 gpu 100% dlss ultra performance 1280x720 66% render resolution r7 5800x3d 171 avg fps low 137 gpu 100% fidelityfx cas 1920x1080 100% render resoluton r7 5800x3d 198 avg fps low 160 gpu 86% cpu 14% dlss ultra performance 960x544 50% render resolution r5 5600x 140 avg fps low 110 gpu 100% fidilityfx cas 1920x1080 100% render resolution r5 5600x dlss over fidility for me since dlss makes my game look just like it does with fidility on just a TAD bit blur here and there but nothing to crazy. benchmarks are with edited config. if you need any help with optimizations for your pc / if your game isnt getting that much fps with a good pc parts then @kyiokaow on twitter ill help you out no cost - i have a txt file of optimizations people should do.
this information has been available way before this video. can't believe you have never seen it. I see an increase of nothing, why? because I already did this months before this video came out.
I didnt think this would help my 1660 super old computer run as smooth as it did after following your guide lol. Big thank you for making the gameplay smooth for me.
This definitely helped me (went from about 100 average to 115 average), and especially helped with the frame drops. Much more consistent now. FYI: the blood setting will disable any kill effects you have on guns with tracers, and the blood setting does not effect performance, just improves general visibility when shooting someone. I personally have spent way too much on this game and have the blood setting set to true because I love my tracer effects. Really appreciate the vid thanks dude.👍
Just a heads up, the texture filtering setting has am imperceptible effect on performance. An-isotropic filtering is old tech and 16x will run fine on ANY modern graphics card even going back 8 years and it keeps textures sharp at shallow angles of view aka the road lines or parking lines when looking at them from further away, or the texture of a wall or graffiti when looking at it from an angle and not straight on. I certainly would not recommend turning this down as it likely gains nothing in FPS and reduces visual quality
@@FourEyesGames I definitely understand, but if we consider hardware that low-end or obsolete I doubt Aniso is going to be their worst offender XD Either way; great guide nonetheless
That's not true. I have a 6900xt and I gain 10 fps in the COD benchmark just by putting texture filtering to linear in the config file. Will it make a difference since my fps never goes below 200? No. but I still want the maximum fps I can get.
Guys I’m telling you I’ve tried so many settings and these settings are legit!!! I have a 4070 so I turn on DLSS frame generation along with Fidelitycas set to 71 and it’s unbelievable how these settings helped thanks brother. I appreciate it.
Nah Nah Nah The Way This Has Helped My Performance so much! before i was getting like 120 MAX on vondal & i would spike down to 80 sometimes and it would make my game stutter! Now with this config file adjustment im cruising above 100 98% of the time and going to 170 fps at times! & my game looks better! Wow Thank You Man, what a God Send you are
Of all the settings videos I`ve watched in the past yours were (and are :D ), along with only one other video from another creator, the most precise and most helping dude. Gameplay has improved a lot with your settings, thanks a lot!
THANK YOU for pointing out the velocitybasedblur setting. That has been driving me crazy since launch and I had no idea there was a way to disable that trash.
*Love the videos 4eyes, keep it up, i know you focus primarily on GPU settings but do you think you could make one about best audio settings, really directed towards footsteps/situational awareness? Both in game as well as with windows settings? I've been messing around with "loudness equaliser" in windows and it seems to have a bit of an improvement. would be super cool to see the expert do a deep dive into it, cheers.*
there is a pro audio RUclipsr I forgot name, but he did perfect EQ Audio settings for MW3 already... he tested about 50 headsets with that EQ and I confirm, its rly good
I have a decent build but was having issues with COD. 50-60fps in warzone and MP. I followed this video to the T and its 100% better. 170-180fps in MP and 140-150fps in warzone. Thank you for this video!
putting catmull clark subdivision level to 0 actually treats it as max, that's why you don't notice a difference. in programs like blender, setting this to 1, you'll definitely notice a difference.
The game reminded me of Cold War after I did this. Also went up from 180 to 220 fps! Thank you! My CPU is significantly better than GPU so I assume the cpu thing did a lot (also I have 14 cores)
@jayh24 that’s nice brother I got to 70-75 under max load with the tutorial on undervolt and some load limit value settings. Using a 280mm Corsair h115 platinum I think 🤣
In some rigs example mine 5800x3D and 4070 on rendererworkercout the actual number of the cores(8) gives better performance, and the GPUUploadHeaps is already tested by other optimizers and in some rigs when is set to "true" it lowers a lot the 5th/1% lows fps, om my case if i have it "false" i have 50+ fps on both values. Only this 2 settings people should test it by themselves
On top of the NVIDEA settings video and this one, wow. I used to average 130fps MP and highs of 160fps. Now I average 170fps and highs of 205fps. Unfortunately Warzone's poop. Interestingly, only one setting really popped the fps change to the max, and that was the one toward the end; to disable GPU Hardware Acceleration. It feels like I'm playing on a NASA computer. I have 240hz monitor which is great, but I also have i5 CPU and 3060 GPU (low CPU and mid GPU) so ofc I can only push it to the absolute maximum which i think is this. I've applied every single setting in this video, the one prior, and my own revised ones that have worked for days also. Thanks again, have definitely earned a sub and I'd be sending a superthanks rn if I could. ❤
If you right click the game on steam and hover over manage it opens another little side tab where you can just click browse files and you won't have to go through properties
@2:50 Shouldnt 'BloodLimitInterval' be set higher than lower? as its a sleep/delay? 1 would mean a very small delay between blood processing however id assume 2000 is high delay in it.
Omfg I applied a few of these settings on another one on Warzone 2.0 ran the benchmark gained 15-20fps zero loss in quality of game amazing same with MW III Warzone except I gained 25-36 extra fps thanks butter smooth.
nice video for amd users hardware accelerated gpu is bad on xtx somehow it turns the gpu extremely more hot than without. and the uv on gpu will be not stable with it on.
I mean great video ngl, but at least show us benchmarks before and after changing these settings, a visual comparison or use case to show would also be a very nice addition
After watching your last guide you helped me gain an average of 151fps in the benchmark for multiplayer 😊 in regards to warzone/urzikstan zombies my fps dips down to the 90s, will this guide help with that?
@@Jordan20man not for all. Turnig it off only benefits Vondel and the zombie map. Vondel is playable with it on though, but Urzikstan is really bad so you gotta turn it off for that one. If you want to keep it for other games i would say dont turn it off but just disable it for COD in the config file.
A nice explanation of tips, can I ask a favour do you know if there is anyway in these setting to change the hud thing that pops up when drivnig vehicles and you enter a new tier zone, I am sure when the game first came out it was much higher up on the screen, now it seems to be near the middle and I hate it when I am driving around the red tier 3 area thank you.
Do 30 minutes free for all on the smallest map (or whichever one is your favorite) and put the bot health to 250. Doing this before jumping into multiplayer is gonna help you so much, trust me!
what helped me the most was changing my mentality. dont engage unless at a comfortable distance and only use melee for close range encounters. this works best in warzone solos but it might have some value to discipline your self to play around your weaknesses in general
hi,i made everything instead of rebar,i got about 20 fps more on avg but my 1% is lower and sometimes spikes from 190-200fps to 140-150 on wz,any help?
I have not found a video that can help me and I came across this one and seen most of the comments are positive so I’m about to reset and now if this works just know good things are coming your way boss!
My FPS went from 200 down to 20 and sometimes negative with a crap load of shattering, MP is unplayable. how do i rest everything? all so keep getting packet bust loss
"number of milliseconds between effects" .. if you set it to 1ms the effects happen more frequently if i understand it correctly so it uses more cpu/gpu that's why i think it should have set it to 2000ms.@@fmjakobb
hey mate, i have done strictly like this step by step and now all the shadows on my map that should be there are just blurry cubes. Do you maybe know some way of fixing this problem'
What’s up FourEyes, can you tell me why MW3 resets my settings every single boot up even when it prompts me to NOT run in safe mode? It seems like it automatically runs safe mode. I then have to proceed to change all my settings. Super frustrating.
So i have 24 cores 32 threads ? Just keep at 16 i guess . I have a rtx 4090 and getting easy 240 fps on high settings . Im hoping this helps with visuals as i cant see in this fog 😅 great vid
the hidden blur setting made the biggest difference! My game feels super clear, smooth and enjoyable now. BIG thanks to you!🔥
where is the hidden blur in the vid
7:41 @@wintrr5601
Ye? Where?
7:41@@yyPana
It’s at 7:44
ive looked up so many fps guides for so many games, but after doing what you showed in this video, this 100% one of the best ones ive ever watched. game fps went from around 100-120 fps (more or less) to over 190-200+, graphics dont look TO good but im still tweaking my settings. THANKS
aint no damn way u must be lyin
@@JusCysmic fedilityfx cas doesnt help with fps, just helps the game look better. i was getting low fps in warzone vondel (around the 100-120fps mark w/ ffx cas on low settings untouched config). i dont remember i was getting after in warzone but in multiplayer i was getting over 190-200+ with dlss on with edited config. i recently upgraded my cpu to a r7 5800x3d paired with my 3060ti and in FK i average around 180-200 sometimes peak at 250fps for a few seconds. yea i over exaggerated a bit and shouldve said in what game fps wise, shipment i would get around 150-190 never really reached 200, after looking at clips i was geting around 200fps in shipment runing around. i cant tell you the fps i get in vondel with my new cpu untill it comes back out - which is what will really tell me how much more fps i get now.
r5 5600x 3060ti 32gb @3200mhz
to
r7 5800x3d 3060ti 32gb @3200mhz
so fps now will be higher in warzone / multiplayer, i use DLSS ultra performance all low/off settings, the shoothouse map (the new small map) i get around 250-300fps , FK around 200fps with edited config in the video. so yes it DID help with my performance alot but i cant not tell you exactly the fps i got after. graphics look just as good with dlss on ultra performance then ffxcas on 100% strength.
looking at ss of benchmark for multiplayer:
211 avg fps low 176 gpu 100% dlss ultra performance 1280x720 66% render resolution r7 5800x3d
171 avg fps low 137 gpu 100% fidelityfx cas 1920x1080 100% render resoluton r7 5800x3d
198 avg fps low 160 gpu 86% cpu 14% dlss ultra performance 960x544 50% render resolution r5 5600x
140 avg fps low 110 gpu 100% fidilityfx cas 1920x1080 100% render resolution r5 5600x
dlss over fidility for me since dlss makes my game look just like it does with fidility on just a TAD bit blur here and there but nothing to crazy. benchmarks are with edited config.
if you need any help with optimizations for your pc / if your game isnt getting that much fps with a good pc parts then @kyiokaow on twitter ill help you out no cost - i have a txt file of optimizations people should do.
@@JusCysmicdid it work?
@@JusCysmiche ain't lyin i did the Same so much better!
this information has been available way before this video. can't believe you have never seen it. I see an increase of nothing, why? because I already did this months before this video came out.
I didnt think this would help my 1660 super old computer run as smooth as it did after following your guide lol. Big thank you for making the gameplay smooth for me.
This definitely helped me (went from about 100 average to 115 average), and especially helped with the frame drops. Much more consistent now. FYI: the blood setting will disable any kill effects you have on guns with tracers, and the blood setting does not effect performance, just improves general visibility when shooting someone. I personally have spent way too much on this game and have the blood setting set to true because I love my tracer effects. Really appreciate the vid thanks dude.👍
Just a heads up, the texture filtering setting has am imperceptible effect on performance. An-isotropic filtering is old tech and 16x will run fine on ANY modern graphics card even going back 8 years and it keeps textures sharp at shallow angles of view aka the road lines or parking lines when looking at them from further away, or the texture of a wall or graffiti when looking at it from an angle and not straight on. I certainly would not recommend turning this down as it likely gains nothing in FPS and reduces visual quality
I completely agree, I just wanted to mention it as some people with low end PCs are looking for absolutely any way to gain potential performance
@@FourEyesGames I definitely understand, but if we consider hardware that low-end or obsolete I doubt Aniso is going to be their worst offender XD
Either way; great guide nonetheless
That's not true. I have a 6900xt and I gain 10 fps in the COD benchmark just by putting texture filtering to linear in the config file. Will it make a difference since my fps never goes below 200? No. but I still want the maximum fps I can get.
@@reizanaliu it hurts visibility as hell, not worth it
@@tomorpedreiro3032 no, it doesnt
Guys I’m telling you I’ve tried so many settings and these settings are legit!!! I have a 4070 so I turn on DLSS frame generation along with Fidelitycas set to 71 and it’s unbelievable how these settings helped thanks brother. I appreciate it.
Nah Nah Nah The Way This Has Helped My Performance so much! before i was getting like 120 MAX on vondal & i would spike down to 80 sometimes and it would make my game stutter! Now with this config file adjustment im cruising above 100 98% of the time and going to 170 fps at times! & my game looks better! Wow Thank You Man, what a God Send you are
This actually works! seeing a stable 200 fps on most maps (from wavering around 130-150)
Of all the settings videos I`ve watched in the past yours were (and are :D ), along with only one other video from another creator, the most precise and most helping dude. Gameplay has improved a lot with your settings, thanks a lot!
Bro please tell me who is the second person whose settings you looked at channel name?
@@kenhelhuos1085 i think the channel was "attursson"
@@michelalt Thank you so much !
THANK YOU for pointing out the velocitybasedblur setting. That has been driving me crazy since launch and I had no idea there was a way to disable that trash.
*Love the videos 4eyes, keep it up, i know you focus primarily on GPU settings but do you think you could make one about best audio settings, really directed towards footsteps/situational awareness? Both in game as well as with windows settings? I've been messing around with "loudness equaliser" in windows and it seems to have a bit of an improvement. would be super cool to see the expert do a deep dive into it, cheers.*
Gonna do a simple audio video soon
Brother, ArtisWar is your man for this. He's an audio engineer and an absolute god.
there is a pro audio RUclipsr I forgot name, but he did perfect EQ Audio settings for MW3 already... he tested about 50 headsets with that EQ and I confirm, its rly good
@@ttvshuma does he have a name?
@@spectrebeast his name is Artiswar
I have a decent build but was having issues with COD. 50-60fps in warzone and MP. I followed this video to the T and its 100% better. 170-180fps in MP and 140-150fps in warzone. Thank you for this video!
Appreciate it bro I was running 110 to 130 in multi now I’m getting 180-190 and getting 150 solid in rebirth my specs are ryzen 5500 rtx4060
What do I do if the whole config file got deleted
@@YYcopiin just load the game back up should bring it back to default
Thanks a lot! I was only getting 20 to 30 FPS but now I'm playing on a solid 80 to 90 FPS
putting catmull clark subdivision level to 0 actually treats it as max, that's why you don't notice a difference. in programs like blender, setting this to 1, you'll definitely notice a difference.
I got around 15% fps improvement! Big THANK YOU!
GPU - RX 6800 XT; CPU - Ryzen 7 5800X3D; RAM - 32GB B-die DDR4@3600-16-16-16-36
The game reminded me of Cold War after I did this. Also went up from 180 to 220 fps! Thank you! My CPU is significantly better than GPU so I assume the cpu thing did a lot (also I have 14 cores)
Doesn't work with the new MW 111 update was getting 217fps and after reformatting my SSD put the same info in this video now its at 189fps.
You’re a legend mate. Fixed my stutter issues😁👍
Incredible result, I set mine to 8 cores maximum worked better than 7. My cpu 5800x3d getting up to 82 degrees now. Before it would cruise at 70.
Yeah this video doesn't explain it correctly. Always match render count to your cores on amd. My 8 core gives the most fps on 8 as well not 7.
Same with intel just match to the pcores
Run PBO2 tuner -30
Dang 82 is crazy, my cpu is 45-50c under load with 360mm aio
@jayh24 that’s nice brother I got to 70-75 under max load with the tutorial on undervolt and some load limit value settings. Using a 280mm Corsair h115 platinum I think 🤣
Bro my shader pre loading freazed at 0% can you help😢
Absolute Banger!! Thanks you a lot!
In some rigs example mine 5800x3D and 4070 on rendererworkercout the actual number of the cores(8) gives better performance, and the GPUUploadHeaps is already tested by other optimizers and in some rigs when is set to "true" it lowers a lot the 5th/1% lows fps, om my case if i have it "false" i have 50+ fps on both values. Only this 2 settings people should test it by themselves
saving this for later
On top of the NVIDEA settings video and this one, wow. I used to average 130fps MP and highs of 160fps. Now I average 170fps and highs of 205fps. Unfortunately Warzone's poop. Interestingly, only one setting really popped the fps change to the max, and that was the one toward the end; to disable GPU Hardware Acceleration. It feels like I'm playing on a NASA computer. I have 240hz monitor which is great, but I also have i5 CPU and 3060 GPU (low CPU and mid GPU) so ofc I can only push it to the absolute maximum which i think is this. I've applied every single setting in this video, the one prior, and my own revised ones that have worked for days also. Thanks again, have definitely earned a sub and I'd be sending a superthanks rn if I could. ❤
Hi FourEyes, Tanks a lot for your help. from all the French comunity of CoDMW3
If you right click the game on steam and hover over manage it opens another little side tab where you can just click browse files and you won't have to go through properties
My Guy, so far the best Video i have seen, 20-30 fps more!
@2:50
Shouldnt 'BloodLimitInterval' be set higher than lower? as its a sleep/delay?
1 would mean a very small delay between blood processing however id assume 2000 is high delay in it.
Yes you are correct.
Omfg I applied a few of these settings on another one on Warzone 2.0 ran the benchmark gained 15-20fps zero loss in quality of game amazing same with MW III Warzone except I gained 25-36 extra fps thanks butter smooth.
Great video thank you, can always count on your to bring us the newest updates.
This bumped my FPS 25-30 average ! Amazing .
Thank you for this video, it's really appreciated.
Thanks for all this info! Can't wait to try this!
I am a very straight guy, but I love you and this tutorial
i normally get 30 or 40 on the lowest settings but with these changes i get 50 to 60 fps
thank you so much man now my game is running even LOWER FPS!!! do not do this shit it does nothing but NEGATIVELY affect your game. saving everyone
awesome data!! my laptop 3070 went from 82pfs avg to 114 fps avg. 1% low improved from 58 to 91 fps!!! really cool! thanks a lot!
I have a laptop 3070 ti and I already averaged 170
nice video for amd users hardware accelerated gpu is bad on xtx somehow it turns the gpu extremely more hot than without. and the uv on gpu will be not stable with it on.
Checking if this works after this much time
You just earned GOAT status with this one!
tysm this helped me so much💪🏼
DO u have any settings that disable others - players that use ''AI - OP - AIM ASSISTANT - busted rotationall shiet?'' so we make MNK supirior again?
Thank u so much this helped alott!!!!!!❤❤
i have no idea if this works but it seems like it works XD
thanks for these videos man youre the best
Man this really help me to get 15 fps on my rtx 3060 ti + 5600x 3440x1440, 130 to 135 fps on fidelityxfcas
Does this settings work for warzone as well?
All stuff done with yours introducion... I gain a few more FPS from 143 to 153 avarage - TNX
My game keeps crashing now😢 any ideas what it might be? Besides just resetting my settings
Do you also have a setting which makes your game crash less?
got an ass pc but did get a decent fps boost, getting about 95-110 from mid 70s
earned a sub on this one mate, cheers
I can’t find cod23 I bought it on battle net, I did everything else, the last step in deleting the shaders I don’t know how to do. Please help:(
i can't believe how good this is... the game looks good and i'm hitting aometimes over 300fps on skidrow (4070ti)
nice video ty for the settings =)
Good man! Thanks!
thread count for handling the job queue should be for logical processors because you have a 8 cores and its by default 9 . am i right ?
I mean great video ngl, but at least show us benchmarks before and after changing these settings, a visual comparison or use case to show would also be a very nice addition
the benchmarks were at the start but in future I can do before and after throughout the video
@@FourEyesGameshow to run benchmark in warzone 2.0
After following steps of this video and the other 2 my game has become blocky around operator and map and can't fix any help appreciated
Same on map
You deserve a like and a subscribe to your channel. Help me a lot in this video. I really get more than 30-50 fps. A lot of thanks
After watching your last guide you helped me gain an average of 151fps in the benchmark for multiplayer 😊 in regards to warzone/urzikstan zombies my fps dips down to the 90s, will this guide help with that?
For reference i have a r5 5600 and a 3060ti.
That is an issue with the big map only. You need to turn off resizable bar to fix it.
@@reizanaliu ah okay, I do have rebar on at the moment, is it better to turn it off for the larger scale maps?
@@Jordan20man not for all. Turnig it off only benefits Vondel and the zombie map. Vondel is playable with it on though, but Urzikstan is really bad so you gotta turn it off for that one. If you want to keep it for other games i would say dont turn it off but just disable it for COD in the config file.
@@reizanaliu awesome man thanks for that info!
A nice explanation of tips, can I ask a favour do you know if there is anyway in these setting to change the hud thing that pops up when drivnig vehicles and you enter a new tier zone, I am sure when the game first came out it was much higher up on the screen, now it seems to be near the middle and I hate it when I am driving around the red tier 3 area thank you.
What I really need is an M&K aim tutorial I cant compete with broken aim assist
Do 30 minutes free for all on the smallest map (or whichever one is your favorite) and put the bot health to 250. Doing this before jumping into multiplayer is gonna help you so much, trust me!
what helped me the most was changing my mentality. dont engage unless at a comfortable distance and only use melee for close range encounters. this works best in warzone solos but it might have some value to discipline your self to play around your weaknesses in general
My graphics don’t render from afar. Which settings is that one ?
Thank you
THANKS MY FRIEND ♥ ♥
Does this help with warzone performance or is there another file I should be changing?
Now the game looks like 1440p, awesome guide
very good technical video. like it.
This fucked my shit up
Fake news
Me too lol
hi,i made everything instead of rebar,i got about 20 fps more on avg but my 1% is lower and sometimes spikes from 190-200fps to 140-150 on wz,any help?
your moaning about having 150fps
mines doing the same getting stuttering any fix?
The Graphics settings i have there other options also as Variable refresh rate , its on
ive tryed a few cores every one is saying different stuff so ive tryed 4 and works perfect
I have not found a video that can help me and I came across this one and seen most of the comments are positive so I’m about to reset and now if this works just know good things are coming your way boss!
And it didn’t, I just froze my game up. Won’t even boot up
im so glad the skip intro thing was covered i hate it!!!!
this destoyed the visability, light glares everywhere.
Thank you king
My FPS went from 200 down to 20 and sometimes negative with a crap load of shattering, MP is unplayable. how do i rest everything? all so keep getting packet bust loss
did you fix this?
@@2008rudyboy yeah i think MW3 did
@gglover2142 ahh had to wait for an update yeah?
I reset everything this video told me todo his setting didn't work for me @@2008rudyboy
thx for a great vid :)
Working perfectly on multiplayer I just gain 30+ fps, however on zombies im only getting 90 to 100 fps.
be grateful, some people can't even run 20fps on this game, 90 to 100 is decent enough.
heard disabling resizable bar can help but havent tested
Why u put 7 to that we have to put 16 there threads ??
I couldn't agree more 8:13 thank you for this because i cant stand the intro lol
I have a 2060 & my game doesn't render properly, when i load in the textures aren't loaded in, any recommendations?
i think the bloodlimitinterval should be set to 2000 instead of 1, no?
blood limit = true so there is a limit, and the interval is 1 so the least amount of blood
"number of milliseconds between effects" .. if you set it to 1ms the effects happen more frequently if i understand it correctly so it uses more cpu/gpu that's why i think it should have set it to 2000ms.@@fmjakobb
Bro with out 160 170 with this settings 210 200 190 🔥♥️📈
I have 24 cores what should i put ?
i have an i7 12700k, it has 8 P cores and 4 E cores, what should i put on the renderer worker count? 11 or 7?
I have a 20 core processor. It's set at 16, should I make it lower or leave it?
you have an intel cpu with performance and efficiency cores, so you want to set it to however many performance cores you have.
hey mate, i have done strictly like this step by step and now all the shadows on my map that should be there are just blurry cubes. Do you maybe know some way of fixing this problem'
hello, i have a i9 14900kf what do I put in RendererWorkerCount ? 23 ??
in another video you stated that to use the count of performance cores so which one is it ?
What’s up FourEyes, can you tell me why MW3 resets my settings every single boot up even when it prompts me to NOT run in safe mode? It seems like it automatically runs safe mode. I then have to proceed to change all my settings. Super frustrating.
I suggest you to save your config file read only, it helps me.
the goat is back
How can I reset these settings?
good looks my guy
So i have 24 cores 32 threads ? Just keep at 16 i guess . I have a rtx 4090 and getting easy 240 fps on high settings . Im hoping this helps with visuals as i cant see in this fog 😅 great vid
thx ur the GOAT ❤
Wish I could do this for my PS$ Slim. I need a PC.
I saw another video about this and he said to divide by 2 with AMD cpu on the RendererWorkerCount, is that wrong?
For those who have a 24 core CPU, what number should they put? i9-13900k
8 for 8 P cores
in the game files put 7 because core 0 is the Core 1 in reality