Sorry stupid fab john. That grab bar is chincy. I knew it was going to be too short. Now the quad will not only flip backwards its going to mangle that exhaust on the way.
I have a 2006 Yamaha raptor I modded the beast with a plus 5mm stroker crank 105.5mm piston and cylinder with a stage 3 cam plus 3mm intake valve and plus 2mm exhaust valve. Efi controller, freed up the exhaust system and air intake, full Hinson clutch basket and springs, 22 tall out back and 23" tall up front because I love my back woods and trail riding. Plus it's geared up a bit, at 75mph in 4th gear I can pull it up then shift in 5th and it's just stupid. I'm a 46 year old combat veteran who has been riding since the days of the atc 90. I was 6 when I started on a motorcycle. I don't hunt or fish my passion is riding! And snowmobiling as well.
I bought my daughter a used Yamaha blaster and modded that, it goes around 70mph on the GPS. Full port n polish 34mm mikuni carb stock was 28mm. Increased compression to the limits for pump gas, it will eat my brothers Polaris scrambler 400cc 2-stroke on take off. Power to weight ratio is key 😉
Just a heads up, when using vp110, if you use it for 2 stroke engines, it tends to separate the oil and gas after settling. This has been my experience and a few other RUclipsrs
I had a super nice 05 years ago, mildly built it myself and tbh it was a torque monster and plenty fast especially on trails. The 660s got discredited cuz the 700 came out right after.
Sounds really good. Looks like it has some serious torque. Ready for Quad Wars!!👍🏻Wish I had a quad to go to the Badlands with you guys. Have fun and be safe. 👍🏻
I have both my yfz would pull on my trx a little but not much. Not anymore now that I have a built motor, intake , full RP exhaust. Now it blows circles around the yfz
It seems like a beast. Do you know what’s causing it to shut off when you let off the throttle? It seems like maybe the idol might be set just a TAD low so when you let off it drops the RPMs too low, but could be something else. Either way this thing seems FAST, like “0-kill yourself in 2.6 seconds” fast
@Matt Wilson the entire raptor is one of the more complex quads actually, but this one is coming along, and it’s very close to being one of the sweetest I’ve seen anybody build on RUclips
Tip of the day. Unpainted plastics with the white lines from stress can be removed with a heat gun. Warm it up, don’t overheat and the white goes away.
Great to see it running! I'm anxious to see how the wars work out. Was glad to see that you covered the details of the missing washer & putting things back together; I find the build/modification content to be the most interesting.
Looking forward to 2, quad warz2. U ride the thumper careful, which is faster Banshee or 686 raptor? Keep up good work dude. What's date of that ride? That raptor leaves it's mark.
Here's another question. So carbs super clean jetted etc. Valves been done. Checked most everything I can figure out. But at the very first lil bit of the throttle when push it. It boggs and misfire or pops some. What could that be. If I make sure I get on it it seems fine. Also if I just barley press throttle and does that n let off it wants to stall or will stall usually like not as responsive as it should be I don't believe . .any ideas ? Cdi issues stator issues ? Adjusting carbs better ?
john the raptor is sick man one of the best biulds uve done so far cant wait for more epic content u and sabo r killing it man keep up the amazing content looks to be lots of fun and a stupid fast quad brother!!!!! but i think sabo is gonna pull out the win!!!! go team SABO!!!!!!
A lot of the high-end custom exhausts get real close to the aftermarket aluminum oil tanks also and let them heat up a lot so most of us people wrap our heater type with heat wrap and it helps a lot. It's nice to have that extra oil capacity with them aluminum tanks but it's not nice to have them heat up LOL
I want to see yamaha blaster's. These little things are cheap as fuck and tons of aftermarket parts and there fun ass hell in the trails. Im a grown man and i still enjoy a yamaha blaster from time to time
No BS straight to the point love it I remember one time in the early 2000 one of my friends got his gf’s mom to co sign a loan and he had most of the money down but was short a little bit well let’s just say that they all knew how he made his money from the (colitis) and the kid there smoked so we were able to throw him a good size bag and we grew up in a small town this is a gods honest story boom we were off to. Beating the hell out of that wheeler being young and dumb lol
Make sure you are using the right setting for audio output on the gopro.. not sure what setting it should be on 😅 so try them all hahaha but I run purple panda too
You should really get some loctite or permatex 518 anaerobic gasket sealer. It won't clog up oil screens and passage ways like excess silicone can if it goes to the wrong place. Ktm used something similar on their RFS engines and it's my go-to sealer now
hey just throwing this out there but your missing the bearing for the one way starter gear. it slides on the crankshaft after the washer you installed that is part of your play issue.
I agree with u Sousa, they should do a lot more challenges then drags. But they’re definitely doing the best they can with what they have . Quad wars is new it’ll get better and better I’m sure
Man that thing runs good I also have a Raptor 660 I've been building ground up all winter it to is a 686 11 to one piston though stage 2 hotcam hope to be riding it within the next month
I can't wait for quad wars You and U and Mike do the best squad wars Mike did the quad wars with some Justin guy And I didn't care for him But you and Mike you guys worked together awesome Together Not a big raptor fan But that raptor sounds good So I can't wait until the quad wars comes out
I have a 2005 660 with aton of performance parts. If I did a 686 Big boy kit how much of a performance game am I going to get is it a noticeable feel to the increase
I also have a 686 big bore and a full exhaust, was wondering what size jets you used bc when I run it it runs good and once I start giving it almost full throttle in every gear is bogs down.
I bought a 660 and was told it had a cam i think stage 2. And a 686. How could i tell. The quad does sound like a muscle car and is faster than a stock 700. Could intake and exhaust make it that much faster and the quad is stock
You would have to take it apart and check the stuff out. Intake and exhaust yes can make it pretty fast by improving that airflow with proper jetting 🤙
The 660 is NASTY, it's ready to EAT! Also that Pete Hager shirt looks BADASS and it's a well made. I haven't worn mine yet but it fits great and I'm a larger guy. Anyways John another GREAT video and a AWESOME build. 🤙🏻😁
Was it stalling out on u ? Might need to bump up that pilot . Sounds like a ripper tho for sure. I’m excited to see who wins quad wars. But u guys should definitely do some other challenges other than drag racing. Maybe some woods racing, hill climbs, maybe some top speed runs, idk u guys will figure it out. I love the content for sure.
Yo my dude jus figured il let u no u should deff get rid of w.e camera u used to film. While u were ride the raptor around the yard, or the mic or something, ( NOT sure what ur setup is) but it sounds like the things full of rocks or fukn skittles or sum.shit constantly rattling around, jus fyi, keep up the good work, can't wait to see it finally in final format, I accruals jus went and bought my first 660 last week
Thanks for the heads up, i was missing an adapter for the mic but didnt figure it out until after the vid was up 👊 good stuff on the 660 they are so much fun to rip on!
Damn she's a ripper dude. One question. Do you have the fan wired to run all the time? Sounded like when you turned the key on it started up. Just curious because I haven't tested my fan of my 660 but mine doesn't come on at least that I've noticed. I've never overheated but I believe I read somewhere that the fan only kicks on at a certain temperature but people wire them to run constantly.
I keep telling sabo next you guys gotta do some unique shit like a trx700xx I love mine man. Or a ktm525 or something maybe the kawasaki 700 twin cvt quad I love that one also! We know this raptor gonna be blowing by the Polaris💪😆😋
![BabyChiefDoit - Wonderful Time (Official Music Video) [Shot By @Rxllo]](http://i.ytimg.com/vi/_Bfqt3zV2KE/mqdefault.jpg)
See ya next year grass lmao 🤣. This thing is a ripper
LMFAOOOOO
Sounds like a ripper dude! Fastest revving 660 I've heard in a while 😁 Good edit man; you iced it with the transitions 🤘👊
Thanks broham! We gunna have us a great matchup 👊
Cant wait to see
I cant wait for this one its ganna be a good one for sure
So amazing! The power of those 660s after so many years still impress me! You are really making me think about getting a dirtcheap 660!
Saw your insta post, stoked! Glad this thing is up and running
Zip Ties and Duct Tape Hold my Life Together Brother.. Hell Yeah.
LOL hell yea roy!
Sorry stupid fab john. That grab bar is chincy. I knew it was going to be too short. Now the quad will not only flip backwards its going to mangle that exhaust on the way.
I agree, Im actually adding extensions. First time making one 👊
Finally no more street bike helmet!!!!!
Omfgggg 🤣🤣🤣🤣👊
Just finished, that thing rips John! Predator is going down, team Yamaha son!
Docmot thanks man! That was easily the funnest rip ive had in awhile!
I see that KX 500!
HEY NO PEEKIN!!!! 😇🙌
Your going to love riding the raptor
Already do 😇
I have an 01 Raptor had to replace voltage regulator
Got to love a raptor
I have a 2006 Yamaha raptor I modded the beast with a plus 5mm stroker crank 105.5mm piston and cylinder with a stage 3 cam plus 3mm intake valve and plus 2mm exhaust valve. Efi controller, freed up the exhaust system and air intake, full Hinson clutch basket and springs, 22 tall out back and 23" tall up front because I love my back woods and trail riding. Plus it's geared up a bit, at 75mph in 4th gear I can pull it up then shift in 5th and it's just stupid. I'm a 46 year old combat veteran who has been riding since the days of the atc 90. I was 6 when I started on a motorcycle. I don't hunt or fish my passion is riding! And snowmobiling as well.
I bought my daughter a used Yamaha blaster and modded that, it goes around 70mph on the GPS. Full port n polish 34mm mikuni carb stock was 28mm. Increased compression to the limits for pump gas, it will eat my brothers Polaris scrambler 400cc 2-stroke on take off. Power to weight ratio is key 😉
Just a heads up, when using vp110, if you use it for 2 stroke engines, it tends to separate the oil and gas after settling. This has been my experience and a few other RUclipsrs
I'm more interested in that dsm that's in the background.. whats your plans for that
I’m only coming if Mr. Panther Piss will be there 🤣🤣🤣
Nice.
I just did the same to my 660 but went with 11:1. Added some Elka stage 3's and it's a trail monster.
Getting ready to install monster duals.
Thank you!
I had a super nice 05 years ago, mildly built it myself and tbh it was a torque monster and plenty fast especially on trails. The 660s got discredited cuz the 700 came out right after.
Who needs a lawn mower when you've got a big bore raptor?
🤣🤣🤣✊
Sounds really good. Looks like it has some serious torque. Ready for Quad Wars!!👍🏻Wish I had a quad to go to the Badlands with you guys. Have fun and be safe. 👍🏻
You guys NEED to do a trx450r vs a carbureted YFZ450.
I have both my yfz would pull on my trx a little but not much. Not anymore now that I have a built motor, intake , full RP exhaust. Now it blows circles around the yfz
@@coreygolfer919 Yeah the 04 and 05 trxs were underpowered compared to the newer ones. I think it would still be a good quad wars series though.
Yeah I have 06 yfz and 05 trx. Stock to stock it’s pretty damn close but yfz edged on it . Now it can’t even come close to keeping up.
Nice, I just picked up an 04 kicker few weeks back. What engine mods and exhaust do you have/recommend? Do mainly trail riding.
Dude, i just got my 686 running halfway decent today. This has me super pumped. Lol
Hell yea man thats sick! Gotta love the torque monsters 👊
I know this is a yr old but your content and your videos are getting better and better! Keep it up bro!
Appreciate you! Ty bro 👊
It seems like a beast. Do you know what’s causing it to shut off when you let off the throttle? It seems like maybe the idol might be set just a TAD low so when you let off it drops the RPMs too low, but could be something else. Either way this thing seems FAST, like “0-kill yourself in 2.6 seconds” fast
Im going to cover the couple minor issues with it in next vid, but your right pilot is a touch lean! 👊
@@StupidFastJohn can’t wait man, keep’em comin
Yeah I think it's probably the carb. My 66p will keep driving at idol even in 4th gear
@Matt Wilson that would have been my second guess. Either one would probably fix the issue. Try whatever is cheapest to do first and go from there.
@Matt Wilson the entire raptor is one of the more complex quads actually, but this one is coming along, and it’s very close to being one of the sweetest I’ve seen anybody build on RUclips
I have a 711cc big bore raptor with similar mods minus the timing change and it's almost to the point it's not fun to ride it's so violent.
Tip of the day. Unpainted plastics with the white lines from stress can be removed with a heat gun. Warm it up, don’t overheat and the white goes away.
Awesome info! Ill definetely use that 👊
like that Hagar shirt
Won that in his insta contest last year
for the next quad wars, you and Mike Sabo could compete in a ICXR event, for example, it'd be great
Great to see it running! I'm anxious to see how the wars work out.
Was glad to see that you covered the details of the missing washer & putting things back together; I find the build/modification content to be the most interesting.
Thank you Robert!!!! 🙌👊
If mike dont get his predator dialed in hes gona have a tough time with the raptor! Cant wait man love both you guys channel
Agreed bro! Lol
Stoked for this!!
Me to bro!
@@StupidFastJohn can't wait for the rest of the series man!
Badass I have a Yamaha Raptor 660R Yamaha 600 twin you guys should get a Polaris Trail Boss and Polaris Trailblazer and put Snowmobile Engines in them
Next quad wars, you should do 2t vs 4t quad. Mike's got the 309r and banshee. Time for you some 2t action.
Can’t wait for the new series and you guys need to do at least one 2-stroke series
Thanks Chuck! Working on it 👊
@@StupidFastJohn I’ll loan you a tecate if you need one 👍
You should see if Pete hager will run his 700 against you guys!
Nice work but I’m rocking with the Predator 😂
Looking forward to 2, quad warz2. U ride the thumper careful, which is faster Banshee or 686 raptor? Keep up good work dude. What's date of that ride? That raptor leaves it's mark.
Thanks Barry!! The ride is the 9th to the 13th
Right on bro. Good job! 🚀💥🇺🇸
Thank you bubbi! 🙌
Here's another question. So carbs super clean jetted etc. Valves been done. Checked most everything I can figure out. But at the very first lil bit of the throttle when push it. It boggs and misfire or pops some. What could that be. If I make sure I get on it it seems fine. Also if I just barley press throttle and does that n let off it wants to stall or will stall usually like not as responsive as it should be I don't believe . .any ideas ? Cdi issues stator issues ? Adjusting carbs better ?
john the raptor is sick man one of the best biulds uve done so far cant wait for more epic content u and sabo r killing it man keep up the amazing content looks to be lots of fun and a stupid fast quad brother!!!!! but i think sabo is gonna pull out the win!!!! go team SABO!!!!!!
Thanks andrew! Its going to be a close challenge man 🙌
A lot of the high-end custom exhausts get real close to the aftermarket aluminum oil tanks also and let them heat up a lot so most of us people wrap our heater type with heat wrap and it helps a lot. It's nice to have that extra oil capacity with them aluminum tanks but it's not nice to have them heat up LOL
I want to see yamaha blaster's. These little things are cheap as fuck and tons of aftermarket parts and there fun ass hell in the trails. Im a grown man and i still enjoy a yamaha blaster from time to time
OMG I have the same shirt!! You must have good taste!!
No BS straight to the point love it I remember one time in the early 2000 one of my friends got his gf’s mom to co sign a loan and he had most of the money down but was short a little bit well let’s just say that they all knew how he made his money from the (colitis) and the kid there smoked so we were able to throw him a good size bag and we grew up in a small town this is a gods honest story boom we were off to. Beating the hell out of that wheeler being young and dumb lol
Predator gang.!!!
LOL
Make sure you are using the right setting for audio output on the gopro.. not sure what setting it should be on 😅 so try them all hahaha but I run purple panda too
Awesome info brother thank you 👊
Want to see a 100 mph quad
You should really get some loctite or permatex 518 anaerobic gasket sealer. It won't clog up oil screens and passage ways like excess silicone can if it goes to the wrong place. Ktm used something similar on their RFS engines and it's my go-to sealer now
I believe thats what mike used to use, ill look into it
Those 686's are torque daddy's lol but you gotta clean that damn thing!
My DMC alien exhaust does the heated oil tank issue I need to wrap the pipes
Badass
Thank you Jordan! 🙌
Awesome man would love to ride with u and sabo . From de . Super cool content and ppl
That quad is insane man and it sounds really good to😎 also it doesn't even hesitate to pick the front wheels man be safe man🙌👍
Thanks Matt! Shes definetely a ripper bro!
Nice bike and edits
well done on that quad man
hey just throwing this out there but your missing the bearing for the one way starter gear. it slides on the crankshaft after the washer you installed that is part of your play issue.
I looked on the diagram and didnt see anything there?!? Ill double check thanks for the info man!!! Coming in clutch brother 👊✊
@@StupidFastJohn here is a ebay link for the gear and bearing www.ebay.com/itm/292168310656?epid=15010459095&hash=item4406969f80:g:v~UAAOSwK1BdXYKa
i would probably go with a better kit though cuz those 660s love to blow out them one way bearings
Love the videos man keep up the good work I'll be watching more of your videos
nice work
I have a big bored stage 2 cammed 03 660 SE, it’s black and red I was told that’s the SE.. anyway.. think friggin rips.
Will you guys do something different this time around vs just a boring drag race??
This series has yet to top TOP QUAD
Just saying 🤣🤣🤣🤣
I agree with u Sousa, they should do a lot more challenges then drags. But they’re definitely doing the best they can with what they have . Quad wars is new it’ll get better and better I’m sure
@@coreygolfer919 they need to take a trip to brewers spot and put these machines against each other there that would be some good video 😬
You guys should do a two stroke raptor?? stupid fast john
I need to add a raptor to my growing collection of bikes
Hell yea buddy sounds rowdy as hell!!!! 🤘🤘🤘🤘🤘
Do you not have to go by torque specs?
Man that thing runs good I also have a Raptor 660 I've been building ground up all winter it to is a 686 11 to one piston though stage 2 hotcam hope to be riding it within the next month
Awesome Roy!
Damn I really was hoping predator was going to win but that raptor runs strong . Gd build man and look forward to watching quad wars
Yea she scoots man! Im happy 👊
@@StupidFastJohn sounds it .
Sounds sick as he!¡ ...you can hear the compression, sucker is popping! You know if it's got stock size sprockets?
It sounds sick! Nice fab work!
Carb needs jetting and please use sum rtv tht you cant see when its assembled
Holy silicone!!!!
Sounds good man I’m excited to see it against the predator I’m voting for the raptor still even though I’m not sure who will get the W
Hay my raptor 660 has power to the head lights and stuff but won’t make a noise if I try to start it not a click nothing any tips please help
Mine too.. but mine sounds like a rattle from starter if I jump it at the solenoid... the start button at handle don't do nothing... help
Should have made two brackets for your oil tank for each side and bolted to the brackets the gytr will flow better
We need some jump to flats for suspension testing purposes in quad wars
I agree!
I can't wait for quad wars You and U and Mike do the best squad wars Mike did the quad wars with some Justin guy And I didn't care for him But you and Mike you guys worked together awesome Together Not a big raptor fan But that raptor sounds good So I can't wait until the quad wars comes out
PLEASE JOHN, sand down those welds, lol make that shit seemless with a little bit of sanding
I have a 2005 660 with aton of performance parts. If I did a 686 Big boy kit how much of a performance game am I going to get is it a noticeable feel to the increase
did you change anything with the starting system? my raptor has an 11:1 piston and it is extremely hard starting. very unreliable
Awesome quad and video my friend !
Thank you!
May need a bigger idle jet ?
Yes needs a 27.5 instead of stock 22.5
Where can I get one of those GoPro mounts for my helmet
John I got a built 660 if your ever in eastern Iowa tell me let’s race
I also have a 686 big bore and a full exhaust, was wondering what size jets you used bc when I run it it runs good and once I start giving it almost full throttle in every gear is bogs down.
Believe they were 35 pilots 170 mains
@@StupidFastJohn thank you I’ll try that out.
Where could I buy a big bore kit for my Yamaha raptor 660 and those brake and clutch levers?
Anthony checkout the links in the description and hop over to bp racing thats where i got mine, the lever i got on ebay for 20 bucks from hong kong 👊✊
Please do an 05 ltz400!!!
I bought a 660 and was told it had a cam i think stage 2. And a 686. How could i tell. The quad does sound like a muscle car and is faster than a stock 700. Could intake and exhaust make it that much faster and the quad is stock
You would have to take it apart and check the stuff out. Intake and exhaust yes can make it pretty fast by improving that airflow with proper jetting 🤙
There wheelie monsters
The 660 is NASTY, it's ready to EAT! Also that Pete Hager shirt looks BADASS and it's a well made. I haven't worn mine yet but it fits great and I'm a larger guy. Anyways John another GREAT video and a AWESOME build. 🤙🏻😁
Thank you Tony! Love my hager shirt 🙌
Do a Top Speed Run.
I wish GYTR wasent the most expensive stuff on the planet because it really is the best the heads are incredible.
Great job my man!
Thank you!
Was it stalling out on u ? Might need to bump up that pilot . Sounds like a ripper tho for sure. I’m excited to see who wins quad wars. But u guys should definitely do some other challenges other than drag racing. Maybe some woods racing, hill climbs, maybe some top speed runs, idk u guys will figure it out. I love the content for sure.
Yes the pilot needs to come up but funny story their chinese carbs and the pilot threads are different then mikuni so im in a bind 🤦♂️
Awesome vid
Thank you Conner!
Sept 22-26 little Sahara is have a banshee meet
Yo my dude jus figured il let u no u should deff get rid of w.e camera u used to film. While u were ride the raptor around the yard, or the mic or something, ( NOT sure what ur setup is) but it sounds like the things full of rocks or fukn skittles or sum.shit constantly rattling around, jus fyi, keep up the good work, can't wait to see it finally in final format, I accruals jus went and bought my first 660 last week
Thanks for the heads up, i was missing an adapter for the mic but didnt figure it out until after the vid was up 👊 good stuff on the 660 they are so much fun to rip on!
Is it faster than my 2020 raptor 700r?
Possibly? I havent ridden your 700 to determine on the ass dyno
@@StupidFastJohn mine is fully stock
More than likely the 660 is faster at this point
Damn she's a ripper dude. One question. Do you have the fan wired to run all the time? Sounded like when you turned the key on it started up. Just curious because I haven't tested my fan of my 660 but mine doesn't come on at least that I've noticed. I've never overheated but I believe I read somewhere that the fan only kicks on at a certain temperature but people wire them to run constantly.
Yes
Yes, it wasnt coming on at all so i hot wired the thermo switch 👊🙌
This man really welding with no gloves
Damn man thing sounds almost 450 like! I actually own a raptor 660 and its doesnt rev that fast.why was it stalling there for a little?
Hey John, what's up with the dsm's* in the background?
Just fixxer uppers 👊
I keep telling sabo next you guys gotta do some unique shit like a trx700xx I love mine man. Or a ktm525 or something maybe the kawasaki 700 twin cvt quad I love that one also! We know this raptor gonna be blowing by the Polaris💪😆😋