What happens when the controller fully charged? Is it ok to continue playing simulator? It will not destroy the battery of the controller? While plug in
@Stefano Truzzi ok 👍 Try turning off the controller while connected then turn back on while connected. If it still won't pop up try disconnectING controller, turn off turn back on then connect again and see.
thanks for the video! I have a brand new tango to pro and I’m having trouble Arming my iflight Cidora. My TBS nano RX is binded with a solid green light and I already created a model and got a to arm once before and now I’m having trouble figuring out what the problem is. The only thing I can think of is maybe some thing got changed when I tried to use a simulator on the same model. Just reaching out for help. Any ideas?
Make sure your arming switch is activating in betaflight. Also if your throttle is not all the way down the quad will not arm not sure of any other ideas
@@edrone_ and when I tried to set up a GPS and saved it my auxiliary three that I set it up on is now gone and when I’m in the UARTs it won’t save either. Is you are at six the same thing as model 106 in my controller?
@@Travel_fulltime if the yellow indicator does not move when you hit the switch and you know you set up the switch correctly in your radio I would try rebinding
I am trying to learn to fly in LiftOff with Tango 2 and - i don't understand if i even chose very light drone (300gr) - it starts to fly from center of left stick. Can any one tell me how it can be amended? Thank you.
@@edrone_ thank you for reply, but i have never fly on real drone and i set 0 in to -0.5 (so now 25% of throttle is my virtual drone leaves a ground) - but i believed LiftOff and other simulators should help to simulate real fly... (ok my drone is still in going to me from China - i will share my expirience in compare Sim vs Hardware)
After practicing with the Tbs Tango 2 pro and a simulator (VelociDrone's Lil Bastard, DJI Drone Simulator, ??), is there a real drone that I should be next? For example, should I practice first on a very-low-cost drone (Tello 2 Sketch Pro Drone, Snaptain, Holy Stone F181W, Cheerwing , Haktoys, ?? )... or jump right into a more quality / expensive drone (ex. Skydio2, Mavic Air2 , Yuneec Mantis Q ??)
Its going to be different for each individual but I started with toy drone inexpensive and then quickly upgraded to a Dji. If it's something you think you're going to stick with I will go for a good quality drone
I've been following this series and dig what you've got going on with than transmitter.
Hello thank you for the presenting 👍
What happens when the controller fully charged? Is it ok to continue playing simulator? It will not destroy the battery of the controller? While plug in
Thanks for sharing cheers 👍
i have tbs tango 2 too..all day trying to connect it to liftoff.but no work...
Does it work with DRL Sim?
Can this transmitter be used for both rc planes and drones?
It is not advisable to use this for rc planes as this controller does not have any trim switches.
@@edrone_ ahh ok thank you. Makes sense! Any controllers out there that you can recommend for both planes/drones?
@Fishme7 Definitely check out the Tbs Mambo controller it would be great for both.
hello im trying to connect my tango 2 pro on fpv freerider sim on android any advice?
my tango2 does not work in dcl on macos via usb, do you know how to fix this?
Check your windows drivers you may need to either roll back to previous version or update
mine is disconnecting every 10 seconds
Try another cable and double check all your connections.
@@edrone_ thanks it worked!
Can anybody explain me why my controller is not asking to use it as a joystick when I connect him to the pc?
Try another cable
@@edrone_ it’s already the third that I try lol
@Stefano Truzzi ok 👍 Try turning off the controller while connected then turn back on while connected. If it still won't pop up try disconnectING controller, turn off turn back on then connect again and see.
@@edrone_ I bought it second hand and I just noticed that they turned off the USB option, now it seems working! Thank you for your help anyway!
thanks for the video! I have a brand new tango to pro and I’m having trouble Arming my iflight Cidora. My TBS nano RX is binded with a solid green light and I already created a model and got a to arm once before and now I’m having trouble figuring out what the problem is. The only thing I can think of is maybe some thing got changed when I tried to use a simulator on the same model. Just reaching out for help. Any ideas?
Make sure your arming switch is activating in betaflight. Also if your throttle is not all the way down the quad will not arm not sure of any other ideas
@@edrone_ when I’m in beta flight under modes I see you auxiliary one is arm but there’s nothing that says on or off or activated.
@@edrone_ and when I tried to set up a GPS and saved it my auxiliary three that I set it up on is now gone and when I’m in the UARTs it won’t save either. Is you are at six the same thing as model 106 in my controller?
@@Travel_fulltime if the yellow indicator does not move when you hit the switch and you know you set up the switch correctly in your radio I would try rebinding
question: how to make it able to do wireless connection to pc?
Not sure 😕 🤔 ill have to look into this
sir can i play this simulator use dji mavic air 2?
I don't believe so but worth a try
I am trying to learn to fly in LiftOff with Tango 2 and - i don't understand if i even chose very light drone (300gr) - it starts to fly from center of left stick. Can any one tell me how it can be amended? Thank you.
Try and recalibrate your transmitter in the liftoff calibration menu usually that's where you tell the program your stick inputs
@@edrone_ thank you for reply, but i have never fly on real drone and i set 0 in to -0.5 (so now 25% of throttle is my virtual drone leaves a ground) - but i believed LiftOff and other simulators should help to simulate real fly... (ok my drone is still in going to me from China - i will share my expirience in compare Sim vs Hardware)
Hello, is it possible to make it with XBOX ?
I believe there is a way you can use gaming controllers as long as the controller has a USB port.
After practicing with the Tbs Tango 2 pro and a simulator (VelociDrone's Lil Bastard, DJI Drone Simulator, ??), is there a real drone that I should be next?
For example, should I practice first on a very-low-cost drone (Tello 2 Sketch Pro Drone, Snaptain, Holy Stone F181W, Cheerwing , Haktoys, ?? )... or jump right into a more quality / expensive drone (ex. Skydio2, Mavic Air2 , Yuneec Mantis Q ??)
Its going to be different for each individual but I started with toy drone inexpensive and then quickly upgraded to a Dji. If it's something you think you're going to stick with I will go for a good quality drone
Have you tried to set it up for other sim’s
I have not but I've hear of other people using other apps
It works well on the free Orqa sim