RTSP for Wyze Cam v3 Download and Install [ Watch Me Doing it... ]
HTML-код
- Опубликовано: 7 сен 2024
- In this video, I show how to download and install the RTSP for Wyze Camera V3. I also explain how to test the RTSP stream using the VLC software.
Link to download the RTSP firwmare:
download.wyzec...
Please leave your comments to help others with your experience on installing and using the RTSP for the Wyze Cam V3.
can you still use wyze cloud services?
will this work on the roku cameras..?
Hi was just wondering will this work on the Wyze cam V3 Pro? thx
Just bought a new wyze cam, updated all the firmware only to realize i can't stream from a computer webpage with out paying. Found the RSTP instructions but when i put the SD card in with the firmware and hold the button down it does not turn purple. Wonder if the newest firmware has changed something.
I had this problem once when trying to install the RTSP firmware, I had to use another SD card with less capacity (storage) for the new firmware. Try that and follow the instructions here step-by-step. I hope this helps.
@@SmartDevicesChannel You are correct. I found a old 2 gig card and it was fine. My 128 didn't work. Probably needs a SD and not a HC or XC card. Thx
Ahh! Maybe this will work for me too. @@SmartDevicesChannel
I'm using WYZE Cam v1 and what is the delay of the screen in v3 in RTSP? Can you measure the delay? If the delay has improved, I think it will be helpful when I buy it.
Question.
RSTP is needed to view two wyze cams on two solo monitors....(correct) ?
This is not working for me as of February 2024. Any thoughts? I am using a 128GB SanDisk ImageMate PRO microSDXC UHS-I Card. I have the .bin file by itself on the root of the card. I hold down the setup button, and continue to hold it while I plug in the camera. The light will be red, then it will begin to flash red, and the camera will say "Ready to connect." Sometimes there will be a brief moment where the blue LED flashes one time before the red flashing LED and the "connect" audio plays.
Sometimes it happens, I had this problem before and I used another SD card and it worked. Please try.
@@SmartDevicesChannel Yes the different card worked. It was also 128GB SanDisk, but a different kind. I had to reformat it for each camera I set up with it though. It was like it broke after every use. In the end I got the first four cameras working. Now I will get more for sure.
does this work with the wyze cam pan v3 ?
Do you need a cam plus subscription for RTSP to function?
No
nine just goes directly to "ready to connect"
Use a different SD card (That happened to me once and using another card solved the problem).