How to Replace Rear Shock 00-07 Ford Focus
HTML-код
- Опубликовано: 6 сен 2024
- Buy Now!
New Shock Absorber Set from 1AAuto.com 1aau.to/ia/1ASS...
In the video, 1A Auto shows how to remove and replace a leaking, bouncy or clunking rear shock absorber. This video is applicable to the 00, 01, 02, 03, 04, 05 Ford Focus.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oae6/1A...
• Phillips Head Screwdriver 1aau.to/oae6/1A...
• Pocket Screwdriver
• 13mm Socket 1aau.to/o2N/1AX...
• 15mm Socket 1aau.to/o2N/1AX...
• 17mm Socket 1aau.to/o2N/1AX...
• 1/2 Inch Air Impact Gun 1aau.to/oF/1AXA...
• Ratchet 1aau.to/oagQ/1A...
• Socket Extensions 1aau.to/o2N/1AX...
For More Info visit us at 1aau.to/h/bJm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Dude Lenny and 1Aauto and company has helped me immensely with repairs on my vericle (2002 Ford Focus). Debt of gratitude THANKS!
Got my first car earlier this year (2003 ford focus lx) and you guys helped me tremendously and can't thank yall enough
love this guy and his commentary. Makes it entertaining.
When he said, “you do you boo boo”. 10:18
For the rear struts, if you don’t have an impact. Use locking pliers to hold the top of the strut while you use a wrench to loosen the bolt, then hold the pliers under the bolt when the bolt gets higher up until you can take it off
+TheSpaceGazer Thanks for the tip!
I didn’t know you could say vehicle with an “R” in there til today
I used Ford shocks came as a kit with all new hardware. About $49/each. Better quality/longer lasting. Ford dealer can look them up with your VIN.
What is a verical?
is there a video of doing the front suspension by chance? Also that is a great video for anyone trying this on there own. thanks.
Lenny is literally my fav… maybe even better than Scotty
Great information and video
+Est lhm Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Is this applicable to 2000 Ford Focus zx3 hatchback 🚗 ??
thanks - get video as always
I am changing the rear shocks on my 03 focus S.E. (2.0 DOHC ZETEC VIN-3) 4 DOOR SEDAN, Do you need to use any of the original bushings or replacement bushings because there is 2 kits required costing 30 for one & about 40 for the other. DOES THE BEE HIVE (BUMB STOP) & THE OTHER BUSHINGS NEED TO BE USED WHEN USING AN AFTERMARKET SHOCK EXACTLY LIKE THE ONE HE IS USING IN THIS VIDEO? Can I simply do away with the original setup & just use the new shock & the standard bushings (rubber bushings & metal cups that come with most traditional shocks?)
with shock in video no Ford parts needed , use washers/bushings provided.
Great video
He did the shock-top access all wrong , you can wiggle out the panel without undoing all the plastic stuff and messing with seatbelt.
Excelente! Great!
My 05 wagon has an access flap in the hatch
All I see in my 06 is two small access ports no where near where he is working
What if you don't pump it first?
How to stop it spinning? Is spinning bad for it?
how do you disconnect the light from the lens on the side panel?
Hammer
You can't.
Did not know ford made a focus in a mini van
+Dallas Andrews This is the Ford Focus hatchback. 1aauto.com
He looks like Steve Zahn
Just what I'm looking for..
Oh, wait.. my Focus is a 2002 Turnier Ghia. Rear shock is completely different.
omg " you do you boo boo" lol
The replacement part is different. It does not have the bumper stop
Hey guys I probably won’t get a response but my car is working perfectly fine the only problem is everytime I turn my steering wheel I hear a popping sound it’s not the power steering it’s maybe the axle idk and too poor to get a diagnostic... Make a tutorial soon pretty please. 😭😭😭
CV axle
🤣🤣🤣🤣🤣
It's called a rear Strut
☆Shock Absorber 😏