Hello, why did you took rebuilt the pump? It wasn't making enough pressure or it wasn't building pressure at all? Because my pump isn't building any pressure and im thinking about rebuilding or buying a new one
The P0091 code can indicate various issues: A problem with the rail pressure control valve. Issues with the injectors or high-pressure pump. Problems related to power distribution in the engine room junction box. There may be other potential issues as well. Please use this information for reference only.
I changed all seals on cp1 pump, but now at high load car stalls, under low load it drives good. All injectots checked, replaced both sensors on common rail. But problem started after replacing all seals. What coule be done wrong? Maybe too tight cylinder heads torqued? I am lost :D
I don't know about your car model, if there's problem with commonrail system. first, at high load injector's fuel return quantity goes high causes stall. second, fuel pump works fine at normal load, but it reaches high and pistons get heated causes pistons overload then can't generates pressure. changing seals not fix all the problem. please diagnose your engine in multiple angle. this is not the answer, just our opinion. thanks.
South Korea is a bit too far for me :( but my daughter is always talking about her school friends hooked onto sometype of k pop, lucky she considers it a waste of time!!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Thank you for a good job!
I wait for SP3 pump rebuild.
Thank you so much!
Thank you. I'll make time to make it.
Hello, why did you took rebuilt the pump? It wasn't making enough pressure or it wasn't building pressure at all? Because my pump isn't building any pressure and im thinking about rebuilding or buying a new one
O-ring hardening, Oil leak occurs
👍👍 Very clear!
good job👌, I have errors P0091 and P0092, it could be the pump, how do I fix it?
The P0091 code can indicate various issues:
A problem with the rail pressure control valve.
Issues with the injectors or high-pressure pump.
Problems related to power distribution in the engine room junction box.
There may be other potential issues as well. Please use this information for reference only.
No he visto que reemplace el sello de aceite de plástico donde gira el eje
Belo trabalho!
Ottimo❤
I changed all seals on cp1 pump, but now at high load car stalls, under low load it drives good. All injectots checked, replaced both sensors on common rail. But problem started after replacing all seals. What coule be done wrong? Maybe too tight cylinder heads torqued? I am lost :D
I don't know about your car model, if there's problem with commonrail system.
first, at high load injector's fuel return quantity goes high causes stall.
second, fuel pump works fine at normal load, but it reaches high and pistons get heated causes pistons overload then can't generates pressure.
changing seals not fix all the problem. please diagnose your engine in multiple angle.
this is not the answer, just our opinion. thanks.
💓
Faydalı video. Yeni Eğitici videolar.
Top
Hello
Thank you,
Do you sell this product?
yes Please contact Whatsapp
What is the torque setting on those bolts
We do not use torque wrench when making this product. However, test for a long time on the test bench to check for leaks.
25 Nm for the 4 bolts at 4:39 sequence
شكرا، لماذا طلاء البراغي ؟
This is to prevent rust.
Those tx40 bolts on the three caps are tight and very soft! Beware!
thank you :)
estos tienen aprete a25 NTW
Damage due to faulty assembly...💯💯💯😂😂honesty
Anyone can make a mistake. :)
Apka garage kaha he
korea
South Korea is a bit too far for me :( but my daughter is always talking about her school friends hooked onto sometype of k pop, lucky she considers it a waste of time!!
Pump sarvise charger
I want to speak with you
I want to speak with you sir
e-Mail : nos.co@daum.net
WhatsApp +82-10-7660-3010