How to use a magnesium fire starter from harbor freight. Survival kit must have.

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024
  • This is a how to use a magnesium fire starter a inexpensive survival tool. This magnesium fire starter is from harbor freight and got the job done. Number 1 item have in your survival kit.
    How2AF I make How to videos and diy videos
    Please enjoy the videos
    Due to factors beyond the control of How2AF, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. How2AF assumes no liability for injuries or property damage incurred as a result of any of the information contained in this video or text. How2AF recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of How2AF, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not How2AF. Entertainment Purposes Only.

Комментарии • 119

  • @zod-engineering-welding
    @zod-engineering-welding 4 года назад +74

    It's better if you don't use the serrated edge. Use the other edge as a corner scraper to shave off larger bits/curls of magnesium while holding the block firmly on the stump/ground. This will let you shave the larger bits of magnesium. Also use that same flat edge to slide it against the flint rod. The serrated edge just rips off the flint without making the sparks. The other flat edge create better friction to create sparks! Try it.

    • @kristopherdetar4346
      @kristopherdetar4346 2 года назад +5

      LOL ! This dude does not know how to use this tool.

    • @masoquistaeo
      @masoquistaeo 2 года назад +7

      Problem is that the blade has a cheap paint on it. I tried this yesterday and the paint got all on the ferro rod. If you sand the paint off, yes your advice would work. Otherwise it actually makes it harder. Thanks for using constructive criticism though.

    • @russellyork9027
      @russellyork9027 Год назад +6

      I agree w the first person. I wanted to watch a video so I knew how properly to use. An I pretty much learned what the gentleman above said. Use the non serated part the other side worked so much better. But I also seen mine also had this black paint, once removed worked like a champ. My son got me this for a birthday present. Wanted to make sure I knew how to use it.

  • @michaelfillinger1488
    @michaelfillinger1488 Год назад +13

    You would have already have frozen to death by the time you got a fire started 😅

  • @yx2k747
    @yx2k747 8 месяцев назад +6

    I just bought 3 of these at the harbor freight today. One for each family member. We're going to practice before going camping😂

    • @how2af263
      @how2af263  7 месяцев назад +1

      That is awesome!

    • @jacobshelt01
      @jacobshelt01 6 месяцев назад

      @@how2af263I learned how to use mine thanks to you sir

  • @silkoakranchpitchforkranch1205
    @silkoakranchpitchforkranch1205 Год назад +11

    It’s like watching Ned in the third grade try to teach a survival class and he’s never used a MFS

  • @danielperales376
    @danielperales376 6 месяцев назад +4

    I'm enjoying the funny jokes more than watching survival Class??

  • @hdrjunkie
    @hdrjunkie 4 года назад +18

    I had of these as a kid, I used my pocket knife to shave off chips of the magnesium instead of making a “powder”, then use the knife blade to strike the flint and BOOM.... fire!

  • @wwolfdogs
    @wwolfdogs Год назад +18

    Old Chinese proverb says: Never buy survival gear from Harbor Freight.

    • @michaelfillinger1488
      @michaelfillinger1488 Год назад +1

      Especially if your life depends on

    • @OShackHennessy
      @OShackHennessy 7 месяцев назад +3

      Most of their magnesium sticks are just fine. To be fair he wasn’t experienced in using one but I’m not criticizing. Everyone needs to get through the magnesium learning curve.

    • @Bluedevil82nd
      @Bluedevil82nd 7 месяцев назад +4

      ​@@OShackHennessyit's definitely an honest video. Pretty cool of him to film himself doing something he's never done before and working through it.

    • @OShackHennessy
      @OShackHennessy 7 месяцев назад +1

      @@Bluedevil82nd I agree and that’s very rare anymore. This is actually one of the reasons I don’t like mag bars they really require some practice and getting used to. They also just aren’t very good in general there are much better options for beginners and experienced users.

    • @Z-Benja-B
      @Z-Benja-B 3 месяца назад

      Then the old Chinese proverb you made up is stupid, because harbor freight is a great place to get a lot of different things.

  • @dustycover3015
    @dustycover3015 3 года назад +13

    This whole damn time I thought it was a sharpening stone with a built in Ferro rod. Funny things is it actually did sharpen my knife.

  • @FefeDasmontanhas
    @FefeDasmontanhas 11 месяцев назад +3

    I was going to buy this but I think I'm going to buy a lighter haha😂

  • @danielperales376
    @danielperales376 6 месяцев назад +2

    Keep them Coming!
    I like the,? sharpening joke?
    I enjoyed dat one!

  • @shaymanking
    @shaymanking 2 года назад +8

    Wow! That was a lot more work than I had anticipated that it would require to get a fire started. I had no idea about what the magnesium bar was. Thanks for posting.

    • @how2af263
      @how2af263  2 года назад +2

      Hello thanks for watching. It was a lot of work to get going. But it does work once you get a good technique going. Thanks for sharing.

    • @securityguardcommand9792
      @securityguardcommand9792 Год назад +2

      Because he isn't doing it right in the beginning. Need to hold the block steady on the surface. Don't need a lot, just a small pile.

    • @BrFishWPB
      @BrFishWPB Год назад +3

      Cause he has no idea what he is doing lol

    • @MaineMadeHomesteader
      @MaineMadeHomesteader Год назад

      The serrated side is for shaving the magnesium, the non-serrated side is for scrapping the rod to make the spark, also you need to aim it down on top of the magnesium/ fuel and scrape down at it, makes it much much easier.

  • @theclydefamily1913
    @theclydefamily1913 8 месяцев назад +1

    I just bought one of these for a stocking stuffer. Should keep my husband busy for awhile

  • @Wetsocksandavocados
    @Wetsocksandavocados Год назад +2

    I just bought one and sitting in my truck now with it. You have to saw at the fli t part like a regular hack saw motion and you wouldn't believe the spark that comes

  • @lisagriffin8898
    @lisagriffin8898 3 года назад +6

    Cool I just got one today, so glad I found your video, I saw someone else do it with a little Ziploc baggie containing dryer lint, I save mine for fire starter, as I have a wood burning stove, trust me that stuff ignites fast.
    Can't wait to test mine out follows.
    🔥👍

    • @how2af263
      @how2af263  3 года назад

      I’m glad you found it helpful. Thank you for sharing the information on using dryer lint. I’m sure that would help tremendously. Good skill to learn.

  • @vegasvato55
    @vegasvato55 2 года назад +4

    you can do the same thing with your ferrocerium rod
    But i put down a patch of Tape to catch the shavings,
    keeps the wind from blowing my pile away.
    Roll the tape into a ferro-match

  • @AintTheDroidULookinFer
    @AintTheDroidULookinFer 2 года назад +8

    Use the backside of a knife instead of the little scraper. You can also prepare in advance by shaving off a bunch of magnesiun and keeping it in a waterproof container. When you need fire dump a little out and spark it.

  • @crabtrap
    @crabtrap Год назад +7

    use the knife to strike a spark, the added weight of a fixed blade or folding knife adds mass momentem to the 'strike'. the saw blade is a last resort item

  • @annturner5087
    @annturner5087 Год назад +2

    When you finally placed the stick on the stump
    It lite.. you were alllll over the place before
    🤣

    • @how2af263
      @how2af263  Год назад

      Hello
      It was tough for me to get comfortable striking and getting the direction of the sparks on target. It wasn’t easy to do for me. I did enjoy finally getting it to work. Thanks for sharing I hope you enjoyed the video.

  • @EricAdamsonMI
    @EricAdamsonMI 6 месяцев назад +1

    Thanks for sharing!
    I suspect that the serrated edge is just a non-fire-related value add.
    Given a ferrocerium rod, if that's what HF embeds, no magnesium should even be needed.

  • @AllWeatherFirestarters
    @AllWeatherFirestarters 3 месяца назад +1

    Great Video and Channel! Any chance on maybe doing a product review of our Firestarter?

  • @larryhillman3813
    @larryhillman3813 2 года назад +6

    Hold the striker on the block steady and at an angle plus use a longer down stroke and you will do much better. Don't move the block around. Basically the little piece of saw blade digs into the rod to create sparks.

  • @nickandnicksconstructionti9508
    @nickandnicksconstructionti9508 2 года назад +2

    Brother My Son and I are joining bc we can share your frustration, we both said I would be cursing the whole time trying ! Lol stay safe

    • @how2af263
      @how2af263  2 года назад

      Awesome thanks for watching! It was a challenge!

  • @Chemical99
    @Chemical99 3 года назад +2

    We SURE ARE, back at it AGAIN!!! LOVE THAT LINE 😁😀😊😂👍

    • @how2af263
      @how2af263  3 года назад +1

      It’s is something isn’t it. Thanks for watching. Please Subscribe To The Channel If You Haven't Already Done So Thank You!

  • @mathewsmith4697
    @mathewsmith4697 2 года назад +4

    Nice to see someone do a video on that item!! 🐻

    • @how2af263
      @how2af263  2 года назад +1

      Hello thanks for watching! It was a good feeling of accomplishment! Thanks and I hope you enjoyed it.

    • @pattyq429
      @pattyq429 Год назад

      I was wondering how to use this as I'm currently starting to building up my camping/survival supplies and so glad I found someone that showed me the proper way of using this! Thanks for a helpful video!

  • @kimnielsenthewordyvikingett159
    @kimnielsenthewordyvikingett159 9 месяцев назад +1

    You can throw that little piece of hacksaw blade away but keep that short length of cheep chain in your pocket!!!
    Use your knife to scrape magnesium from the little block!!!! And when you have enough that you can see a little pile turn the block around and quickly scrape the ferrowcirium rod down into the tinder pile that you've hopefully already gathered!!!
    And be prepared to add more kindling and maby a little of your breath!!!!
    And you might have just created a decent little fire 🔥😊!!!!!

    • @Naltddesha
      @Naltddesha 6 месяцев назад

      MOAR !!!!!!!!!’s!!!!!!!

  • @davidglazener7921
    @davidglazener7921 Год назад +2

    The ferro rod has a coating and the striker has a paint coating. Both must be removed to get good sparks.

  • @UberTheRandom
    @UberTheRandom Год назад +2

    The little saw blade is good and easily replaceable, but often people will use their knives to shave magnesium off and then strike the spark. Much easier to hold.

    • @how2af263
      @how2af263  Год назад +2

      Thanks for sharing. I wanted to use what was provided in the kit. It was tough but I managed to get it done!

    • @UberTheRandom
      @UberTheRandom Год назад

      @@how2af263 No problem man, you did great, got the job done!

    • @davidglazener7921
      @davidglazener7921 Год назад +1

      Do not use your knife blade. Use the 90° spine of your knife.

  • @Moto-me
    @Moto-me 22 дня назад

    I bought one a few days ago at harbor freight. Couldn't get it to work. This video might make a difference. I also bought the survival knife and dumped the garbage out of the handle and put a Bic in there

  • @OShackHennessy
    @OShackHennessy 7 месяцев назад +1

    These are fun to use but they are not good firestarters there are so many better options out there that are way more efficient and user friendly. I do not recommend them to most people. You’d do far better with fatwood or Vaseline/cotton than with mag bars.

  • @rick2254
    @rick2254 2 года назад +3

    Make you a cotton ball with vaseline and it will light the first or second strike . I have one from Harbor Freight Tools and it works great . You will not need magnesium shavings.

    • @Naltddesha
      @Naltddesha 6 месяцев назад +1

      Can’t do that in a survival situation. If you’ve got access to cotton balls and Vaseline, you’ve probably got access to a lighter or matches 😂

  • @jrginn2237
    @jrginn2237 10 месяцев назад +2

    Just keep some Vaseline soaked cotton balls in your kit. One spark and you’ve got fire.

  • @JonnyProperly
    @JonnyProperly 11 месяцев назад +1

    Yeah, that was done with wrong techniques. I can usually have a fire going in under 2-3min with a mag block / farro rod. Something I also learned in Boy Scouts when i was a kid is to make accelerators using toilet paper and a small glob of vasoline, just take a TP square and put small glob of vasoline in the center and then twist it up gently like a piece of candy (Chocolate covered cherry) make some of those and keep in a thick zip lock bag in your camping / survival gear and when ready to start your fire take your kindling and place the vasoline/TP ball in the middle and a spark or 2 will light it right up and it will burn for a long time so you can keep adding kindling and small sticks until its really going. I also buy beeswax rope which is excellent for fire starting and comes in nice small containers but if used right will start quite a high number of fires when needed.

  • @Tcarnes41
    @Tcarnes41 3 года назад +8

    Your supposed to use the flat side of the scraper, not the saw side.

    • @how2af263
      @how2af263  3 года назад +1

      Thank you. It wasn’t easy. I have to work on my technique.

  • @americanpatriotbill
    @americanpatriotbill Год назад +1

    It's better to pull the striker block away and hold the driver in one place....better spark placement

  • @jimmyjohhn15
    @jimmyjohhn15 5 месяцев назад +1

    So with harbor freight comes good and bad. Im going to say this, the striker on this sucks.
    I couldnt get a single spark with the striker. I pulled out my knife, which you should have in a survival situation anyways, and got a fire started in seconds

  • @leonardchiscavage6418
    @leonardchiscavage6418 3 года назад +2

    Try using a round file to make shavings next time a lot easier

  • @ricksorber9562
    @ricksorber9562 Год назад +1

    I just got one like this except it was the $5 one from Amazon. I scraped the paint off, fired one shot in the air and lit a cotton ball on my first attempt. Not too bad.
    So far the only down side is the striker is hard on the thumbs. And I'm not sure how long the rod will last. It's pretty flat already.

    • @how2af263
      @how2af263  Год назад

      I agree the rod wears rather quickly.

  • @OShackHennessy
    @OShackHennessy 7 месяцев назад +1

    Going to give you respect for sticking with it until you got a fire. These things aren’t the easiest way to start a fire.

  • @paulca3321
    @paulca3321 3 месяца назад +1

    I just got one at harbor freight...but I'm still buying a dumb day lighter 😂😂

  • @Naltddesha
    @Naltddesha 6 месяцев назад +1

    This feels less like a tutorial, and more of a guy figuring out how to use the magnesium block for the first time on camera, lol

  • @paulwall5851
    @paulwall5851 3 года назад +5

    Lol hope u don't get lost in woods with no lighter I've got the same kit I can have a fire going within three strikes five tops stop moving your hands so much put you magnesium down at a 40° angle make sure it's secure quit moving it so much throw your Sparks all in one direction towards your Kindle

    • @how2af263
      @how2af263  3 года назад

      Thank you. I’m have to work on my technique.

    • @OShackHennessy
      @OShackHennessy 7 месяцев назад

      Do you feel better about yourself now? We are all impressed.

  • @markmontanio9550
    @markmontanio9550 10 месяцев назад +1

    He held it wrong till the very end when he was trying to spark the kindling

  • @LovingIdaho
    @LovingIdaho Месяц назад

    They work pretty good especially when you look at the cheap price., You cant expect to get anything as god at the under $2 price .,

  • @tanyawinemiller9156
    @tanyawinemiller9156 3 года назад +1

    Thanks! This helps!!

  • @wwolfdogs
    @wwolfdogs Год назад +2

    Sadly, a man froze to death trying to start a fire with his Harbor Freight fire starter.

    • @wendy_says_so
      @wendy_says_so Год назад

      That man likely didn't practice enough, and didn't plan enough. A lot of folks wait until its do-or-die before they try something. I was on my 3rd HF fire starter before I actually needed it in the field.

  • @cayman9873
    @cayman9873 2 года назад +1

    Bought some but never got a fire going. Need to try again

    • @how2af263
      @how2af263  2 года назад

      Hello thanks for watching. It’s a great feeling once you get it going. It was tough to do. Thanks for sharing.

  • @AMO1776
    @AMO1776 Год назад +1

    I don’t know if this guy is incapable or acting like it. I have one on my four wheeler for emergencies. I used it the other day and lit paper and started a fire easily on about two minutes. I have multiple ferro rods and this type is my 100% go to.

  • @Z-Benja-B
    @Z-Benja-B 3 месяца назад

    All you needed to do was get the spark next to the stuff you’re trying to light on fire. You’re holding it a couple of inches away until the end of the video there. You do not need to use that much magnesium.

  • @justsayin7704
    @justsayin7704 11 месяцев назад +1

    This is why there are laws against inbreading.

  • @drewgrows7765
    @drewgrows7765 Год назад +2

    Is the entire bar magnesium?

    • @Naltddesha
      @Naltddesha 6 месяцев назад

      Besides the striker, it’s seems to be a solid chunk of magnesium

  • @jerdog333
    @jerdog333 Год назад +1

    I'm no expert, but when things like this don't work well, try pulling the block away from the blade instead of the blade towards the fuel.

  • @sorinsandro42
    @sorinsandro42 10 месяцев назад +2

    The back of your pocket or hunting knife would work 100X better and 100X more sparks than that useless blade you got there. Trust me! Try it!

  • @Elliot-bi2qe
    @Elliot-bi2qe 5 месяцев назад +1

    More fine tinder probably

  • @davidglazener7921
    @davidglazener7921 Год назад +1

    There is NO flint
    It is is ferrocerium.

  • @rogerchien2329
    @rogerchien2329 4 года назад +4

    Dtop moving you hand so much

  • @maxleubner5377
    @maxleubner5377 3 года назад +4

    Your holding it the wrong way to make sparks

  • @calebbroadhead348
    @calebbroadhead348 8 месяцев назад

    The way your thumb hurts holding the block whe striking 😭

  • @TheAirlock
    @TheAirlock Год назад +1

    You're using it upside down, Sparky!

  • @USMCRON
    @USMCRON 2 года назад +1

    Did anybody else see the worm, snake in the picture frame on the ground to the left of his pile stash! It has been there the whole time moving and flipping stuff and himself over. (He is very small)

  • @clivedunning4317
    @clivedunning4317 Год назад +1

    I don't think you've used one of those before, basically you are not using it in the correct manner. Pin the tinder down with the bottom corner of the magnesium bar, plus your tinder bundle should have been larger and fluffier. As you didn't do either of these things correctly is why you had the problems. Basically you need to practise more with your fire starter.

    • @craiggerlach5548
      @craiggerlach5548 Год назад

      well this was a great video, people buy these and this is what they know, what is on package, they know it can start a fire, they try and follow what package says, was perfect for those of us who use such things.. I mean if you can carry this, you can carry a lighter, matches, etc.. moss, birch bark, dried leaves, carry tinder, unless it is well below zero I would find no use for a fire in the woods anyhow.. even living deep in woods, I would just hike out to somewhere.. now if broke a leg, dropped my pack top of a cliff with phone n supplies and all I had was this in my pocket, sure I would use it to try and start a signal fire,., but how many people would come, I would just think someone cooking their lunch..

    • @wendy_says_so
      @wendy_says_so Год назад +1

      @@craiggerlach5548 I struggled the same way as OP did with this fire starter - I found the problem is you need to be a lot more patient and scrape a lot more magnesium in to get a good pile to start. And yes it takes a lot more time. The advantage to one of these is the magnesium does a great job of starting if things are damp or if its very cold. I carry strike-anywhere matches and tinder in a survival knife (surprisingly Harbor Freight has a great inexpensive one), but I also carry this - I compare this to carrying jumper cables even if you carry one of those jump-starter battery doohickies: when you're out there you never know if your go-to's won't work.
      Also - I like practicing alternative fire-making, because its cool to know basic fire starting!

  • @kytsunman8592
    @kytsunman8592 Год назад +1

    That's the most harbor freight video I've seen to date lol pos tools

    • @how2af263
      @how2af263  Год назад

      Hello and thank you for sharing! I’m glad you enjoyed the video!

  • @michaelatwood6659
    @michaelatwood6659 Год назад +1

    You need training. Works fine if you know what you’re doing.

  • @jeffr5221
    @jeffr5221 Год назад +1

    His issues were due to operator error. He probably scrapes this Ferro rod with his folding saw

    • @mplsmark222
      @mplsmark222 6 месяцев назад

      I just bought one of these, the directions cleanly state you need enough shavings to make a pile 1/8” thick the diameter of a US quarter.

    • @jeffr5221
      @jeffr5221 6 месяцев назад +1

      I use one of these too and I have found you don't really need that much but it certainly doesn't hurt. His problem is he is using the serrated edge of the striker to try and get a spark. It can work I suppose but not as good as the flat edge, you will get sparks almost every time. Better yet use the back side of your knife.

  • @frasermorrison7657
    @frasermorrison7657 5 месяцев назад +1

    This had to be a joke I could of started that fire in seconds that poor fire starter looked like it had been through a mincer 😂 you could start many a fire with it he managed 1 and it was destroyed 😅 don't fancy his chances in the wild 😂

  • @pauldayonghuang9284
    @pauldayonghuang9284 3 года назад +1

    Remind me of cast away

    • @how2af263
      @how2af263  3 года назад

      Hello thanks for watching. It’s not that easy to do for the first time. But once you have flame it’s an amazing feeling. Thanks for sharing your comments greatly appreciated.

  • @julesgardet659
    @julesgardet659 5 месяцев назад +1

    nope

  • @panchogeorocks
    @panchogeorocks 2 месяца назад

    I hate these with a passion bc they don't work as advertised. I rather use the rod versions

  • @SUPERFLY-ky7yh
    @SUPERFLY-ky7yh Год назад +1

    👍

  • @KatherineM-hx4sb
    @KatherineM-hx4sb 10 месяцев назад +1

    I got one. It looks doable the way you showed. Now time for some fall camping 🏕️

  • @keithtincher7223
    @keithtincher7223 11 месяцев назад +1

    Scrape off the black coating first!

    • @how2af263
      @how2af263  10 месяцев назад

      Thank you I did realize it was a protective coating.

  • @user-mn6tm1gq5p
    @user-mn6tm1gq5p 7 месяцев назад +1

    He dont how to ues for me to fast 😮

  • @FC_Dobbs48
    @FC_Dobbs48 2 месяца назад

    You do not know what you're doing. Why did you make this video?