Deal sir, thanks a lot for this Video! The original instruction paper was terrible. Your detailed Video helfend me to install my tour pack. Done!!! Next Beer is mine.
Probably one of the best videos I've ever seen clear precise easy to follow phenomenal job I just bought at system and would have had no clue how to get it on thank you
That’s funny I feel the same way. What the point no tour pack of its ugly. I’m trying to figure out a way of removing the grab bar at least and adding fender extension with fillers to make this work as a naked rear end when the tour pack is off. Man those triangle bracket are ugly. lol. There’s gotta be some other designed kit out there
Sir I want to thank you very very much. Great ,video. Very informative. Very cool of you to take the time. I bought a aftermarket kit and it didn't come with instructions. I have A D.D bad and I just couldn't look at all those parts and hardware and make heads or tails from it. THANK YOU!!!!
I have a question. I currently have a 2007 street glide that came with a detachable chopped tour pack. I've upgraded my saddle bags to the 14 and up style. Now with my tour pack installed I can not open my saddle bag lids. Any suggestions.
Great video.....I have a docking station on the my RK now that works for the backrest (small one) I would like to leave that in place and install the second docking station for the tour pack. Can that be done.?? Can I have both docking stations for when I want just the small back rest or take it off and add the tour pak..
What about Relocating the schrader valve for your air shocks? Where my instructions showed to move it to, the bracket is too thick to allow the air pump to screw in and push in on the needle. I have to remove it from the bracket in order to add air. Am I missing something here?
I have been researching the quick detach for my 2008 ultra classic. All of the rear hardware mounts I have found say they won’t fit an ultra classic. Do you know of any that do?
Will the newer style mounting bracket work with the docking hardware for the 97-08's? I'm asking because I bought a complete tour pack but it has the newer mounting bracket. I still need to order the docking hardware but didn't know if I needed the older style mounting bracket. And if I do have to order the older bracket, will it mount just the same to the tour pack itself?
What are the rectangle hols in the rear vertical fender bracket for ? I have asked probably 200 people in the last 15 years, I've read all kinds of literature, I've looked at ALOT of bikes, trying too figure out what that hole is for. Please, if you know of have a idea what it is for let me know. It's been driving me crazy for many years.
I have fillers on my 06 ultra. Also thinking of changing those over with a aftermarket fender extension. And looking at a bracket to remove the grab handle. Looking at the triangle bracket to the rear for docking it appears I’m going to run into custom cutting. Have you done an install or come across changing over old ultra with fillers. I’m trying to make the bike look more naked with the tour pack off yet adding the brackets and not removing the grab bar defeats the purpose of removing the tour pack because all these brackets look ugly without the pack on. Don’t mean to babble I think I might be running into more problems to solve once I get into a rebuild as usual plus I don’t want to waste money on unnecessary parts I found a grab handle eliminator bracket online and need to incorporate that piece into the mix. Don’t mean to ramble on but I love watching your videos and value your expertise option. What might you suggest or what do you think…know what I’m saying!
Theres no way to remove the seat without removing the trunk after this is added. Is there a "Hack" for that?? The amp is mounted under the tour pak on my 99' preventing this from being an easy fix......
I have a Road King Custom from 2004 and I´m looking for a kit for mine.. my bike doesn't have the straight fender struts. mine are rounded. does this still work for my bike?
We got this one on with no issues...this was actually a buddy of mines bike...been riding it pretty hard since this video with no issues and he has a passenger about 80% of the time.
Why can’t Harley use the quick release set up for the back rest for the tour pack too . Instead of using that extra chrome piece? It’s not very good looking with that elbow looking thing looks terrible
Deal sir, thanks a lot for this Video! The original instruction paper was terrible. Your detailed Video helfend me to install my tour pack. Done!!! Next Beer is mine.
Probably one of the best videos I've ever seen clear precise easy to follow phenomenal job I just bought at system and would have had no clue how to get it on thank you
So glad the video helped you Kyle...that system can be a hot mess and prompted me to get this video made..thanks for checking it out and the comment!
Amazing video. One of the best I've seen on this subject! Good job!
Thak you im glad it helped!
I like to see how it looks all put together and the tourpak removed. I feel like mine’s gonna be ugly as hell without it lol.
That’s funny I feel the same way. What the point no tour pack of its ugly. I’m trying to figure out a way of removing the grab bar at least and adding fender extension with fillers to make this work as a naked rear end when the tour pack is off. Man those triangle bracket are ugly. lol. There’s gotta be some other designed kit out there
Sir I want to thank you very very much. Great ,video. Very informative. Very cool of you to take the time. I bought a aftermarket kit and it didn't come with instructions. I have A D.D bad and I just couldn't look at all those parts and hardware and make heads or tails from it. THANK YOU!!!!
Great job explaining the process! 👍🏼
Thank you for the video . I used this to install my luggage rack / sissy bar on my anniversary road king . So much better than guess work
Great video... question, what do you do with the wiring and antena when you have the pack off ?
Thank you so much for this video. You did an amazing job turning a box of hardware into a functioning docking system! I'm a sub now. Keep it up!
What about tourpacks with lights and turn signals?
That's what I was thinking.. lights, speakers, cb
You will have to cut the wires and splice in quick connect terminals. Not that hard
I have a question. I currently have a 2007 street glide that came with a detachable chopped tour pack. I've upgraded my saddle bags to the 14 and up style. Now with my tour pack installed I can not open my saddle bag lids. Any suggestions.
Good video. How about the license plate bracket? Can it stay put?
Can you add the 14+ bags to the 07 street glide like you did on the 09-13?
So can you mount a detachable backrest on the same docking system for use when not using the tour pack??
What does the chrome u shaped piece above the taillight do ?
Do u have a video with placement if just running the black bracket with sissy bar backrest?
Great video.....I have a docking station on the my RK now that works for the backrest (small one) I would like to leave that in place and install the second docking station for the tour pack. Can that be done.?? Can I have both docking stations for when I want just the small back rest or take it off and add the tour pak..
Will the other style bracket for the tour pack not fit an 06 ultra classic?
What about Relocating the schrader valve for your air shocks? Where my instructions showed to move it to, the bracket is too thick to allow the air pump to screw in and push in on the needle. I have to remove it from the bracket in order to add air. Am I missing something here?
I’m having trouble getting my saddle bag bracket back on the plate. Tips? Tricks? Yours magically appeared back on bike lol
I’m looking for the rear tail light lens that put light on plate on the relocate place on bottom
Same here. Did you ever find one?
@ nope sold the bike
The 4 point mounting system. Is that the correct spacing to put a sissy bar on? I don’t always wanna run the tour pack.
What I'm wondering to
I have been researching the quick detach for my 2008 ultra classic. All of the rear hardware mounts I have found say they won’t fit an ultra classic. Do you know of any that do?
Can this be made to work on a 1995 electraglide ?? Will thios system work with a detachable backrest as well as detachable tour pack ??
Will it work for a 2003 ultra classic
‘08 Electra Glide Ultra Classic - Where does one find the Brake light lens with “plate illumination down”? TIA.
You may try Custom dynamics. Other than I am not sure. I would have to dig into that one.
@@Advanblack, got one thank you!!
Will the newer style mounting bracket work with the docking hardware for the 97-08's? I'm asking because I bought a complete tour pack but it has the newer mounting bracket. I still need to order the docking hardware but didn't know if I needed the older style mounting bracket. And if I do have to order the older bracket, will it mount just the same to the tour pack itself?
HI COULD YOU PLEASE TELL ME WHERE TO BUY THIS CROME COVERS ?
I CANT FIND THEM HERE IN SPAIN. COULD SOMEONE POST ME THE LINK?
Will this set up allow you to attach a newer 4. Point tour pack.
no you will still need to use the 08 and older tour pack mounting bracket
Can you do one for a solo mount?
Im sorry we do not sell a solo kit so we would not be able to shoot a video on it.
Hey I have a 2008 EletraGlide CVO SE and I can't find this conversation kit on the website? Can I get some help finding it?
Exactly what I needed
Thanks For Video
Do you happen to know what the tour pack and saddle bags are made of for a 99 HD Ultra Classic?
ABS plastic
What are the rectangle hols in the rear vertical fender bracket for ? I have asked probably 200 people in the last 15 years, I've read all kinds of literature, I've looked at ALOT of bikes, trying too figure out what that hole is for. Please, if you know of have a idea what it is for let me know. It's been driving me crazy for many years.
I have fillers on my 06 ultra. Also thinking of changing those over with a aftermarket fender extension. And looking at a bracket to remove the grab handle. Looking at the triangle bracket to the rear for docking it appears I’m going to run into custom cutting. Have you done an install or come across changing over old ultra with fillers. I’m trying to make the bike look more naked with the tour pack off yet adding the brackets and not removing the grab bar defeats the purpose of removing the tour pack because all these brackets look ugly without the pack on. Don’t mean to babble I think I might be running into more problems to solve once I get into a rebuild as usual plus I don’t want to waste money on unnecessary parts I found a grab handle eliminator bracket online and need to incorporate that piece into the mix. Don’t mean to ramble on but I love watching your videos and value your expertise option. What might you suggest or what do you think…know what I’m saying!
Do you know of a tour pack for a 2008 Softail deluxe? I don't see advanblack offering one.
Theres no way to remove the seat without removing the trunk after this is added. Is there a "Hack" for that?? The amp is mounted under the tour pak on my 99' preventing this from being an easy fix......
Great video. Makes ordering one with confidence that it will work. Do you know if those are the Monroe shocks hack or something else?
Yeah the air ride o this bike was DIY by the customer
I have a 2000 HD ultra classic wanting a quick detach and a license plate relocation kit any part numbers?
Im sorry, we do not offer the plate relocation kit.
The NEW Lic plt brkt came with my kit but i bought mine at HD.
Awesome Video... Thanks much!
I have a Road King Custom from 2004 and I´m looking for a kit for mine.. my bike doesn't have the straight fender struts. mine are rounded. does this still work for my bike?
Im not sure can you please email me a picture of your rear strut to steven@advanblack.com
Very helpful video
Thank you Shon
Thanks for the video
is this better than the amazon kits? i bought one and its loose as a goose
We got this one on with no issues...this was actually a buddy of mines bike...been riding it pretty hard since this video with no issues and he has a passenger about 80% of the time.
So is this your kit or just the China made kit?
Will this work for a back rest as well? Or only the tour pack?
Backrest mounts to the top of your shock and first two points on the system nearest the fender
Thank you
Will this work on an 08 ultra classic?
Why can’t Harley use the quick release set up for the back rest for the tour pack too . Instead of using that extra chrome piece? It’s not very good looking with that elbow looking thing looks terrible
If you relocate your plate you can cut the tubing back where it meets the chrome cover and buy 3/4" chrome plug caps to put on the cut tubing
I have a 1994 flhtcu. The brackets look exactly same on my bike, would it work on mine?