DIY Pull Up / Chin Up Bar (Under $32.46)
HTML-код
- Опубликовано: 18 окт 2024
- In our first video endeavor to insure domestic bliss, we build a Pull up / Chin up bar for the boss lady's workout space. I present to you "Hits from the Honey-do" Volume One 😁
-----------------------------------------------------------------------------------------------
House of Chop behind the scenes: / house.of.chop
The Chop Shop: www.thehouseof...
Website: thehouseofchop...
🙇🏻♂️To Support the Channel: / houseofchop 🙇🏻♂️
Chop's favorite things:
www.amazon.com...
Welding supplies & machines: www.usaweld.co...
-----------------------------------------------------------------------------------------------
Tools I Used in This Project:
Strong Hand Rhino Cart (fixture table): amzn.to/2XYrvAJ
HTP Invertig 221 Welder: www.usaweld.co...
Evolution Miter Saw: amzn.to/3rzm5GL
DIABLO Steel Demon Blade: amzn.to/2WGVYOd
Milwaukee Band Saw: amzn.to/2KhCRZr
Ryobi 18V Drill/Driver: amzn.to/2WIHEtB
Strong hand Locking C-Clamps: amzn.to/2IE2zEb
Metabo Angle Grinder: amzn.to/2WFHjrD
Genuine Metal Works Squares: genuinemetalwo...
Optrel VegaView Welding Helmet: amzn.to/2WDjpbi
Welding Tips & Tricks TIG FINGER: amzn.to/2IJLjxD
#houseofchop #exercise #workout
Thank you for watching!!! 🔥👍🔥
👉🏼 I'm looking for feedback on the music.🚨
Would the video be better with it? Did you enjoy the zen of the shop sounds?
Your help would be appreciated!
House of Chop I think the music choice is great. It kept things moving and wasn’t distracting. We cringe at our old videos and the music. We are trying more subtle music choices going forward.
Gray House Studio Excellent thank you for your experience and feedback. With so many decisions to make, many of which don’t seem that important but you never know what the audience feels is necessary. 🙌🏼🙇🏻
I love the feel of this video. It's like I'm hanging out in your shop watching you work. Well done sir 👍🍕
WorksByaHurst Thank you sir. Any pizza 🍕 in the comment section is well welcomed 🔥👍🏼🔥
Hey dude, love the enthusiasm. Nice project. Well done.
Mechanical engineer here. Two constructive suggestions: 1) The UV from arc welding is a real melanoma hazard. You should cover your arms with a long-sleeved cotton work shirt to minimise this risk. 2) Those gloves with sanding discs, belt grinders, bandsaw and angle grinders: They're a real entanglement hazard. In industry you're generally not allowed to wear gloves around machines like that, because having your fingers violently sucked into an angle grinder at 11,000rpm is a bad way to end the week. Generally, bare hands are safer around machines with an entanglement risk.
Not trying to be a crank; just don't want to see you suffer a long-term of short term injury while having fun in the shop. (I can tell you're safety conscious because of the respirator, etc..)
I'm so glad I found your Channel. I love your Positive Attitude and you Crack me up. Keep it up.
Thank you! Seriously appreciate the generous words and you taking a moment to comment. Life is short no point in going around miserable. I have a great time out in the shop and figure it’s best shared that way. 🙌🏼
Yes glad to see you have enough concern for your eyes as well as your lungs when painting. A rattle can has the same dangerous lung-destroying chems as any painting! Nice build! And I wear safety readers when painting as well. Those chems can do a number on the delicate membranes of our only-two-we-get eyeballs! Kudos bro!
Thank you for watching Jeff. I agree with you 110% I take shop safety very seriously. I enjoy doing these things and want to continue doing them for as long as possible. Messing up my lungs or eyes just not an option. 🔥👍🏼 🔥
HOC, i love your videos! So full of energy and positivity! Keep up the great work and cant wait to see the next one! Good luck
Thank you! Really appreciate your kind words. So much negativity in the world the HoC is about keeping it fun. 🔥👍🏼🔥
Choptastic my man! I love the mix of music and shop sounds👌
Art and Metal Fabrication Thanks Chris. It’s looking like I need to bring the music back. 😉
Thank you for responding to the call for insight 🔥👍🏼🔥
Looks killer and your fixture game in on point!!
BlackburnFabrication Thanks Dave. Was entirely inspired by the one you made a while back. 👍🏼
As for the fixtures I’m just fumbling through it learning how to use them. 🔥👍🏼🔥
You need more subscribers, I can tell you have been fabricating for awhile. You make that look easy. High quality tools mean nothing without a good craftsman behind them. 👨🏭👊
Eli Wilson Thank you Eli! Greatly appreciate the kind words. Subscribers come slow but I’m building. It would help me a ton if you shared my channel with some people you might think are interested. Thank you again, be well 🔥👍🏼🔥
Top video and build👌I'm 50/50, I like the videos with the music, but I really like the ding of the metal fitting together and the tool's 🤔🤷♂️😁 keep up the excellent work my friend 👊
Thank you Darrell. I'm with you, 50/50 on it. I was hoping people would swing hard in one direction or the other. We shall see I guess. 🔥👍🏼 🔥
Ok.. that Rhino Cart has to be one of the coolest ideas I have ever see.
Jay N It is pretty awesome! Lots of bang for the buck there. Thank you for watching and taking a moment to comment 🔥👍🏼🔥
The cantaloupe’s a nice touch!
I thought so 🙌🏼
Good job
Great video Chop , nice shop sounds too
Thank you Mark! Super appreciate the support. 🔥👍🏼 🔥
Nice job and nice set of pwr tools. I use Dollar Store reading glasses when I work on my car and spray rattle can paint. Thx from near Toronto Ont Canada.
Thank you! Appreciate you taking the time to watch and comment. Great suggestion on the glasses. 🙌🏼🙇🏻
Excellent work love it
Thank you 🙌🏼
Great video man, did you build that tubing notcher?
Justin Voss That is a Strong Hand tools piece. It’s made to go with the Build Pro and Rhino Cart tables but would work with any fixture table. Trick Tools and a few other places sell them. Lots of bang for the buck there. 🔥👍🏼🔥
Justin Voss www.trick-tools.com/tools/Strong-Hand-Tube-Notcher
Great video man.
burt24pop Thank you 🔥👍🏼🔥
Those guns!!💪💪😁😁
Papa Mo's Metal Works Hahahaha!! Thanks for watching brother. 🔥👍🏼🔥
Awesome video, love your vibe and cool to see the various tools put to work. I’m assuming you made that welding cart!? Very nice
Yoooo, great job!
Christian Bravo Thank you!!! Appreciate you taking a moment to comment. 🔥👍🏼🔥
10:11 When you start up GTA San Andreas
GAV925 Hahahaha 🙌🏼
Awesome build chop, I feel like I am the camera man in the video. I like hearing the sounds of the tools working. Music is always good but this works without👍
Chuck G Thank you Chuck. Really appreciate you watching and taking a moment to leave feedback. I’m 50/50 on the music thing but I think I’m going to go with just the sounds of the shop for a bit. See how it works out 🔥👍🏼🔥
Great video Phil!
Thank you! Super appreciate you taking the time to check it out. Would you have liked it more if I had left the music in?
Honestly, the music makes no difference to me, with or without. It's entertaining content just watch you make stuff and some good humor. I like seeing how other people work through their projects.
Bobby Sixguns Thank you again. I agree with you. I like seeing how other people operate. 🔥👍🏼🔥
I need to build one of those bandsaw tables...
bbrinser My first Tig project. 🔥👍🏼🔥
Yes! Build one they are super handy. I use that saw a ton because of it. 😉
me: so under $32.46, cool
House of chop: 1 question...do you have a welder?
me: no
House of chop: hmm we might have a problem!!
Yeah, without a welder this one would be tough. 🤣🙌🏼
Ok now I know how to do the pull up bar, but how do I get that energy?🤔😂
Great vid! Thanks!
Good luck building that bar it was a fun one. As for the energy… live it! Mostly we find what we look for and the rest is just crap that’s easier to deal with when you have the energy. 🙌🏼
@@HouseofChop Thanks!
I thought I had great energy, until watching you. Lol. I’ll have to work on it.👍🏾
Came for the HoC, stayed for the glasses tips. I started wearing glasses right after I got laid off last year and now that I’m working again I am amazed at being able to see the things I thought everyone could only feel and dumbfounded that my eyeglasses get dirtier ten times faster than safety glasses. Why, how, what witch cursed these things?
Hey knucklehead... 😉
Fit Up seemed fine to me, as long as it works, who cares?!
Great video, I personally vote for music, as it takes the edge off of the tool sounds. Plus, it brings out the “cheese” of your jokes... which I for one, always look forward to!
Tool Scrounge Now that’s the type of feedback I’m looking for. Thank you for taking the time to watch. 🔥👍🏼🔥
Thank you so much u very good really
amara adem Thank you! Appreciate you watching and taking the time to comment.
🔥👍🏼🔥
More on Instagram @house.of.chop
emmm you got alots of tools, i wish i could have that many like you
What your looking at is a life long collection. 😉🙌🏼
What are the bar sizes you used for the hollow and L-sections?
It’s actually cheap 3/4” Sch40 Black Pipe you can find in any hardware or home improvement store. It has a nice heavy wall and won’t cost you as much as tube.
Thanks 👌👌👌
Hi Good Day Sir May I know what's the name of your working/welding. Table?
Thankz 👨🏭
It’s the Strong Hand Tools Rhino Cart. I did a video on it too. It’s and awesome table VERY well thought out. Check it out here.
ruclips.net/video/FtWOQ3Jdpsk/видео.html
Great video, no need for music! In my opinion, it just adds a layer of production that trys too hard. Let the shop sounds rock and keep on rollin.
LacklusterSupply Thank you. Really appreciate you taking the time to watch and lend your thoughts to the cause. There is something about those shop sounds. 🙌🏼🙇🏻
Sure, it might be $32.46 if you already have a fab table, big welder, steel cutting mitre saw and deluxe auto darkening helmet!
Hey looks good but insulation above your face whilst pulling up
What is the diameter of the bar
It’s actually cheap 3/4” Sch40 Black Pipe you can find in any hardware or home improvement store. It has a nice heavy wall and won’t cost you as much as tube.
Get that basement ceiling boarded! Glass fibre floating around when you are breathing hard from your workout is not good.
Nice video but more like: Did it myself not do it yourself. Unless you’re a welder or at least have the tools to weld.
"Under $32.46".
Sooooo,
$32.47?
Na man I would have never paid $32.47 way too much. It was exactly $32.45 😁
Step 1: buy $1000’s worth of tools
Yes! I highly recommend it! Thank you for watching
u did not do any pull ups in this video.... u stood on a stool and faked it!
You blew the lid off that one. I didn’t even build a pull up bar! FAKE! 🤣