God, I wish everyone did Walk-throughs like this. No heavy breathing guy going into 30 minute explanation of why he had pizza last night, no giving obvious ass instructions like they're talking to a 2 year old, no shaky unrecognizable video footage. Just clear pointing at what needs to be done. Music is a bit annoying though, but that's why there's a mute option. 10/10
Thanks guys! I'm doing this first thing tomorrow morning. I bought a pair of Taiwan- made direct replacements for $139 off Amazon. My current headlights plastic lenses are peeling! This looks like an easy job using a drill driver, extensions, 10mm socket, T30 & T25 bits.
Why no wiring harness connection on the passenger side headlight housing when you were removing old lights ? Would it not be best to test new lights before putting the bumper back on and screwed tight ?
Is there a procedure to properly align or bore-sight the headlights? If they are installed a fraction of a millimeter out of position, this becomes a glaring flaw to oncoming traffic and other drivers looking at your car in the rear view mirror. I appreciate this video. Good work.
One question...if I decide to put ordinary bulbs into led lens...what it will look like. Will they be visible at night and will police or during car registration...will make me any problems?
@@DIYGarageProjects vidjeh da su ZG table pa mogu pisati na našem. Hvala na odgovoru. Zanima me vidljivost sa običnim sijalicama/žaruljama noću. Da li će se normalno vidjeti noću na putu bez problema? Hvala unaprijed!
Ja sam na mazdi imao leče i žarulje kada si mi se LED pokvario, siguran sam da se bolje vidi sa lečama nego obicnim farovima jer je svjetlost usmjerena bolje i puno manje "curenja" svijetla tamo di ne treba bit.
I know this is some 7 yrs old video ,but changing headlamps from factory to led lamps ,your no longer be using vw lamp adjuster on the dashboard which is motorised ,so what do you do with the electronics - as new lamps surly won’t be a straight forward switch ?
Did these require mods for the turn signal wiring? Nothing on the wiring in the otherwise very helpful video. Looking at some headlights that require Eu adapter or splicing for turn signals.
Something you missed was that there is a screw for the bumper in each of the lower vents either side too. You showed the right one but didn't see you unscrew them. Same screw as the ones behind the grill. In the UK the grill isn't screwed in either it just pops out. Great video other than that. Thanks!
Where did you get the assembly? I can't find any like that anywhere. I can only find a couple on amazon, but they don't seem nearly as good quality as these.
@@DIYGarageProjects Kit from ebay? Can u elaborate plz? I am doin a retrofit and do not want to go crazy, but if there is a retrofit kit, I'd like to try it out
+Kacerac Pozdrav, ima na internetu za narucit kit s kojim obicne farove pretvoris u ove sa lecom, treba rezat plastiku i varit open, dosta komplicirano, zato smo ih mi kupili od covjeka koji se time bavi za 150eura odprilike
DIY Garage Projects and reviews pozdrav,moram priznat super izgleda,duplo ljepse nego prije...ja imam cetvorku ali crnu...nego da pitam,jel maglenke nisi uopce spajo ili...???
You don;t need to do all that just to change a bulb...just a lot of patience and small hands. Removing the battery on that side will help a lot. I replaced all of my bulbs in less than hour...lost a bit of blood in the process and taught my daughter a few naughty words, but it all worked fine. Like everyone else, I would like to buy better lights for my Golf (brilliant car, let down by rubbish lights), but I don't know where to find them.
Yeah after some investigation i figured out that the light compartment can be opened with a small plastic-metal mechanism from the inside. Just need to be careful to manipulate the plastic pieces and the bulb can be replaced in minutes without further disassembling.
Great video - thanks for taking the trouble to share! Out of interest : it looks like you replaced the OE (dual halogen reflector) headlights with something that has a projector in the low-beam position. Can you share the details of what replacement headlight you used ? Also, is the projector a halogen or HID/Xenon ? I was amused that you also battled with those !^&%!&^%*&^%! stupid plastic retaining straps that hold down the top of the headlight (outer strap on left-hand headlight). Man, they are rubbish .....
+Jeremy Cheek thanks for your comment, those are oem modified with lens that had bixenon bulb in it for low and high beam, and stock highbeam works also
Ah, so you modded the OE headlight with a bi-Xenon HID projector. I know it's off-topic, but it would be great if you could share details of the parts you used. I'm interested because I'm busy contemplating doing the same thing and shopping around for parts. Been looking at the mini-H1 v7.0 HID projectors with the "mini-Gatling Gun" shroud, both from Morimoto. However it seems the mini-H1 retrofit is a bit difficult because it's too long to fit into the space where the H7 lamp went. What was your experience ? Would be a great topic for a "howto" video since there isn't much on the Golf 4 specifically. But I guess it's a bit too late for that now! ;-)
+Jeremy Cheek we bought moded headlights so we couldnt make a video on it, but this bulb is also h1 and too long for the housing so there is a hole i the plastic behind
simple process? Perhaps some may think so. I change my headlight in 30 seconds without taking my car apart. What ever happened to just pop the hood and the bulb access is right there?
My mistake and apologies for misunderstanding. I have seen vehicles where the process for replacing the bulbs was described as being similar to what you were doing.
This is a stupid car..remember??????in my volvo i only tale a clamp and the whole headlight comes out!!!that is volvo not vw rubbish!!!this car is rubbish...!i pent 2 hours trying to replace one bulb..take battery out..and many other stupid components!!!
Petrak kkh a gle,ja sam sam stavljao crne farove i grill,prvih par dana je bila zanimljiva,i onda mi je dosadilo pa sam vratio srebrni a svjetla ostavio crna,i sad je top,ako hoces,javi mi se na fejs pa cu ti poslati slije
So, simply take apart half the car....... haha, what bullshit this video is. you just need to remove the battery to access the passenger side and the drivers is easier. took me ten mins. on my own. and im shit.
God, I wish everyone did Walk-throughs like this. No heavy breathing guy going into 30 minute explanation of why he had pizza last night, no giving obvious ass instructions like they're talking to a 2 year old, no shaky unrecognizable video footage. Just clear pointing at what needs to be done. Music is a bit annoying though, but that's why there's a mute option. 10/10
Thank you
Thanks guys! I'm doing this first thing tomorrow morning.
I bought a pair of Taiwan- made direct replacements for $139 off Amazon. My current headlights plastic lenses are peeling! This looks like an easy job using a drill driver, extensions, 10mm socket, T30 & T25 bits.
Why no wiring harness connection on the passenger side headlight housing when you were removing old lights ?
Would it not be best to test new lights before putting the bumper back on and screwed tight ?
Is there a procedure to properly align or bore-sight the headlights? If they are installed a fraction of a millimeter out of position, this becomes a glaring flaw to oncoming traffic and other drivers looking at your car in the rear view mirror. I appreciate this video. Good work.
One question...if I decide to put ordinary bulbs into led lens...what it will look like. Will they be visible at night and will police or during car registration...will make me any problems?
As far as i know, at least in my country, you wont have any problems with ordinary bulbs in any headlight
@@DIYGarageProjects vidjeh da su ZG table pa mogu pisati na našem. Hvala na odgovoru. Zanima me vidljivost sa običnim sijalicama/žaruljama noću. Da li će se normalno vidjeti noću na putu bez problema? Hvala unaprijed!
Ja sam na mazdi imao leče i žarulje kada si mi se LED pokvario, siguran sam da se bolje vidi sa lečama nego obicnim farovima jer je svjetlost usmjerena bolje i puno manje "curenja" svijetla tamo di ne treba bit.
I know this is some 7 yrs old video ,but changing headlamps from factory to led lamps ,your no longer be using vw lamp adjuster on the dashboard which is motorised ,so what do you do with the electronics - as new lamps surly won’t be a straight forward switch ?
i would like to know where you bought this lights, a link or something, also is there any wiring and component needed to be added to make this work.
Really good in depth video, i subscribed where those headlights the halo angel eyes from ebay?
Lovely video thank you for sharing this really helped me out 👍
Did these require mods for the turn signal wiring? Nothing on the wiring in the otherwise very helpful video. Looking at some headlights that require Eu adapter or splicing for turn signals.
much better. how much does it coast, headlights?
Around 200usd
Koje su sijalice u kratkim i dugim svjetlima?
Pozz veliki da li si morao da prepravljas zice ili ide dzek od starih?
That would take 10 minutes less without them gloves 😂
Thats all i was thinking the whole time
Where did you get those. And whats the brand?. Share a link if you dont mind. Thanks
Something you missed was that there is a screw for the bumper in each of the lower vents either side too. You showed the right one but didn't see you unscrew them. Same screw as the ones behind the grill.
In the UK the grill isn't screwed in either it just pops out.
Great video other than that. Thanks!
Where did you get the assembly? I can't find any like that anywhere. I can only find a couple on amazon, but they don't seem nearly as good quality as these.
These were made with a kit bought from ebay, so they are original but modified
@@DIYGarageProjects - gotcha. Thank you for the response!
@@DIYGarageProjects Kit from ebay? Can u elaborate plz? I am doin a retrofit and do not want to go crazy, but if there is a retrofit kit, I'd like to try it out
Zdravo gde ima da se uzmu vec uradjeni ovakvi farovi, i kako ste povezali bi xenone za projektor?
Can I have a link for the headlights? I wanna buy the same design too.
Hey man, did you find the headlights? I'm looking for new projector headlights too.
guys cheak a depo brand for same design
so iwanna ask u guys
ur light xzenon or led?
iwanna change my light
Très bon travail ça ma bien servi merci
Thanks now my car have angel eyes 😍
Gracias por la enseñanza trabajan muy bien a la perfección 👍
Svaka vam cast
Hvala :)
@@DIYGarageProjects radite jos nesto provukli biste se lagano
Nema golfa vise :D al imam u planu jos snimat, pogledajte ostale videje :)
Thank's for uploading! :)
+Zsolt Simon no problem :)
What are the sizes of the high beam low beam and blinker , h7?
is there a more croat car then a Mk4 golf?
Yes, golf is much more Bosnian car :))
What size rachel piece is that
We’re the lights plug and play or did you have to code them
+Badboyjuni plug and play
Well done. Useful video. Thank you.
+eddy de hond thank you for watching
Are golf mk4 gti headlights works on non gti golf mk4 ?
Yes
And how do you remove the Xenon headlights? They are really annoying to remove...
Zdravo komsija,
Gde si nabavio ove farove i koliko si ih platio :D
+Kacerac Pozdrav, ima na internetu za narucit kit s kojim obicne farove pretvoris u ove sa lecom, treba rezat plastiku i varit open, dosta komplicirano, zato smo ih mi kupili od covjeka koji se time bavi za 150eura odprilike
Mnogo dobro izgledaju :D
Ja sam narucio slicne direktno od proizvodjaca za 199e ali ne zalim odlicni su :D
DIY Garage Projects and reviews pozdrav,moram priznat super izgleda,duplo ljepse nego prije...ja imam cetvorku ali crnu...nego da pitam,jel maglenke nisi uopce spajo ili...???
What is the name of the new headlights?
What bulbs are the blinkers and low beam
where did you bought those??
he boughted them from a stores
Do the original adjustment motors fit aftermarket lights?
hello , depo hedlights without xenon kit ? thanks
Nice but isn't this illegal where you live?
What brand headlights
puedes hacer un vedio Como mejorar tierras y corriente para golf 4
Which type of high beam?
Eu tenho um golf mk4 quero fazer um projeto desse farol com vcs como faco
How it is possible the need for so much work to change only one light bulb.
Yes that is really anoying
You don;t need to do all that just to change a bulb...just a lot of patience and small hands. Removing the battery on that side will help a lot. I replaced all of my bulbs in less than hour...lost a bit of blood in the process and taught my daughter a few naughty words, but it all worked fine.
Like everyone else, I would like to buy better lights for my Golf (brilliant car, let down by rubbish lights), but I don't know where to find them.
Yeah after some investigation i figured out that the light compartment can be opened with a small plastic-metal mechanism from the inside. Just need to be careful to manipulate the plastic pieces and the bulb can be replaced in minutes without further disassembling.
What is the process for calibrating headlights after installing?
yes
Comment je peux avoir ces phares led
Bro this music is like you have to kill somebody, bro you just changed the lights
Thanks brothas
what color is the LED on High Beams?
+FeelX Charbz it has a bixenon kit so its a same color
DIY Garage Projects and reviews I get it, but whats the color in lumens?
+FeelX Charbz you mean kelvins? 6000 i think
DIY Garage Projects and reviews Ok thank you, didn't you use a retrofit projector for you bixenon? (On the drl and high beam)
+FeelX Charbz yes, i is a stock front lights modded with a bi xenon kit, i think you can find those on ebay
nice video men
+abdon manchego thank you
Where the two little goats that go apart are connected.
does anyone know what the middle projector is for? mine wont seem to turn on at all
313stratus fog light I believe
Fog light needs euro switch to work.
Great video - thanks for taking the trouble to share!
Out of interest : it looks like you replaced the OE (dual halogen reflector) headlights with something that has a projector in the low-beam position. Can you share the details of what replacement headlight you used ? Also, is the projector a halogen or HID/Xenon ?
I was amused that you also battled with those !^&%!&^%*&^%! stupid plastic retaining straps that hold down the top of the headlight (outer strap on left-hand headlight). Man, they are rubbish .....
+Jeremy Cheek thanks for your comment, those are oem modified with lens that had bixenon bulb in it for low and high beam, and stock highbeam works also
+Jeremy Cheek and yeah thoe plastics really are rubbish :)
+Jeremy Cheek and yeah thoe plastics really are rubbish :)
Ah, so you modded the OE headlight with a bi-Xenon HID projector.
I know it's off-topic, but it would be great if you could share details of the parts you used. I'm interested because I'm busy contemplating doing the same thing and shopping around for parts.
Been looking at the mini-H1 v7.0 HID projectors with the "mini-Gatling Gun" shroud, both from Morimoto. However it seems the mini-H1 retrofit is a bit difficult because it's too long to fit into the space where the H7 lamp went. What was your experience ? Would be a great topic for a "howto" video since there isn't much on the Golf 4 specifically. But I guess it's a bit too late for that now! ;-)
+Jeremy Cheek we bought moded headlights so we couldnt make a video on it, but this bulb is also h1 and too long for the housing so there is a hole i the plastic behind
what's the link to the headlight
Very helpful. No b s either
simple process? Perhaps some may think so. I change my headlight in 30 seconds without taking my car apart. What ever happened to just pop the hood and the bulb access is right there?
+Jason Simpson what? You can change the bulb without taking apart the car, we changed the whole headlights not the bulbs
My mistake and apologies for misunderstanding. I have seen vehicles where the process for replacing the bulbs was described as being similar to what you were doing.
+Jason Simpson its okay, some cars really do overcomplicate simple things
This is a stupid car..remember??????in my volvo i only tale a clamp and the whole headlight comes out!!!that is volvo not vw rubbish!!!this car is rubbish...!i pent 2 hours trying to replace one bulb..take battery out..and many other stupid components!!!
@@ciogon u mad?
You think this is a two man job or can one guy accomplish this?
Name litterally anything besides sex that it takes two people for
You used the glass cannon music!
Jos da ste grill u crno ofarbali i nista vise 👍
Petrak kkh imam ja 4ku sa crnim grillom i svjetlima,ruzna je,ko betmen izgleda,ljepsa je crna svjetla sivi grill
Marijo Tomašević meni je osobno lijepa prijatelj ima srebrnu cetvorku i crni grill i bas dobro izgleda
Petrak kkh a gle,ja sam sam stavljao crne farove i grill,prvih par dana je bila zanimljiva,i onda mi je dosadilo pa sam vratio srebrni a svjetla ostavio crna,i sad je top,ako hoces,javi mi se na fejs pa cu ti poslati slije
Marijo Tomašević javim se
muito top amigo
Music name ?
hell yeah TDI
nema auta do Golfa 4....i ja ga imam...😁
Golf je prodan odavno, al da dobar auto za te novce, ne kvari se previse, pozz :)
That music is terribe
Quero fazer no meu carro
Vc pode entra em contato com migo
no,dont like,they doing too much
It's not step by step
So, simply take apart half the car....... haha, what bullshit this video is. you just need to remove the battery to access the passenger side and the drivers is easier. took me ten mins. on my own. and im shit.
I, for one, think this is a tragedy and the designers should be deported to Siberia.
0:22 is that really necessary?! What about the other side?!
You cant remove front bumper without removing the "mudguards"
I'm confuse: some say you don't need to remove none of that
ruclips.net/video/MHXuLxdsL1E/видео.html
tell us more.
not gold white hit in car
Jebate bog