BMW Comfort Access Not Working? -Fix BMW Comfort Access Not Working || BMW 640d BMW 530D BMW 730D

#BMW #bmwcomfortaccess #comfortaccess #640d #530d #730d #bmw640i #bmw530d #bmw730li #bmw6series #bmw5series #bmw7series
Do you get battery discharge attention message in your 5,6,7 series BMW? Probably your comfort access sensor in your door handle is on the end of it’s lifespan. Does your door open and close randomly without the need to press a button on your key fob to do so? Then you came to the best place for solution. I am going to show you how to fix it for free. Open the door where you noticed the issue. Remove the rubber cover if you have the 6 series, on 5 or 7 series you won’t have that rubber cover. Use a size 4 hex bit to undo the door lock bolt. Then use a long T15 Torx bit or screwdriver to undo the door handle bolt. You don’t have to remove the bolts, turn them only till you start to feel resistance, then stop. Now remove the door handle. You will see the 2 connectors, one is for the door handle light and the other is for the comfort access sensor. The bigger one is you are going after. Use a flathead screwdriver to disconnect the sensor. Now you can start to put everything back together. Firstly put the loose connector back to the hole then slide the door handle back as well. Tighten up the bolts, put back the rubber cover and test your door handle if it fitted back properly. You lost your comfort access, however you got rid of battery drain issue and the random door openings and closings. If you want you can replace your door handle to retain the comfort access function, you can use the same steps too.

[@dante8825]

Superb, my 6 series has been doing this for ages, I've replaced multiple actuators and handles at the dealers, it's cost thousands and in the end I just got sick of it. I love the car however, IMO it's the best looking BMW - better than the new 8 series.
Your video made a lot of sense, and realising how much the parts are, I'm going to find a place that will fix it based on the above advice. Thanks again.

[@MrNiceGuy94]

@Dante I agree with you, it is a beautiful car. Actually the car in the video was mine, then I sold it to my friend. I prefer petrol cars and it was boring for me.
But back to your problem. I recommend you that you do it all yourself, you will save a lot of money. If you don't mind losing the comfort access then just simply disconnect it. If you follow the steps in the video it will 100% solve your problem. However if you want to keep the comfort access, then buy a door handle from ebay, it's a lot cheaper there than elsewhere and get it colormatched to your car and install it yourself. This is what I would do if I were in your place.

[@arifgoker804]

Thanks a lot. It was useful and explained in detail

[@MrNiceGuy94]

You are welcome ;) I am glad it helped!

[@PredatorFX1]

Very good information. Thanks. I also disconnect temporarily front right door.

[@MrNiceGuy94]

Thanks buddy, usually it is always the right front door :D

[@CeeeRock1]

Good

[@M6DANN]

Hello so I replaced my door handle and still doesn’t work ?

[@seegreen6484]

Did you get a used one

[@M6DANN]

@@seegreen6484 no it worked Already