Ja, als einer seiner langjährigen Patreons bin ich immer noch verwundert wie sehr der Einfluss der Waschmaschinen auf den Weltfrieden im Allgemeinen unterschätzt wird.
After all this time hearing Stefan in English it still sounds weird to me hearing him in my own language. I still watch his English videos just because they’re faster than the German ones. Sorry for all of you depending on crappy YT subtitles.
I've been watching this at 2x. Speed so I had to slow it down to fully realize he was not speaking English. I thought it was just his accent going hard at for a minute 😂
Great job Stefan! Based on the translation below, you did a great 60 second summary of Arc Overhangs! And thank you Joel for doing these 60 second interviews, it's high-pressure with the short time limit, but everyone who couldn't attend gets to experience a wide variety of booths in a single 15 minute video. Of course it's not the same as being there in-person, but it's the next best thing. RMRRF was amazing and I'm looking forward to the next one! - Steven
Thank you again Joel and David for those awesome 60 seconds! This was a fantastic event and can’t wait to return next year! Coincidentally enough like maybe 30 minutes later, I was able to get the light panels back up working 😅
Thank you Joel. I was at the RMRRF conference, but you don’t make it a point to speak to everyone or learn what is interesting about each individual or product. Your excellent video gave me so much information that I was not able to glean while there. What would be amazing for a convention is if on the night before, a video such as this was produced and went out to all attendees either by reservation or at the door. A roadmap to everything and everyone. All vendors were interesting and a wealth of Information. Thank you, excellent video!
My table was to the left of Nerys' rockets, and had the dragons he was so worried about. The only table with a Prusa MK4 and a Bambu X1C side by side and took a ton of questions all weekend long about which one was my favorite, when did I use one over the other and more. I also lost count of how many high-fives I got to give Joel over the weekend. :)
And I bothered Ian the whole time :P Lots of fun with Nerys nextdoor and great meeting and chatting with people. From the kids who wanted the little prints of dragons and Minecraft Creepers, to the adults who loved Ian's giant Spider Gwen and larger dragon prints, to people who had no idea about 3D printing and just heard about the show and wanted to check it out. My personal favorites were listening in on the Rack Robotics team (makers of the Powercore EDM machine) talking about the project, the challenges, and how they're doing... and having a in-depth discussion with a couple in their 80s, one of who used to be a chemist, explaining the different materials and additives to get different print properties. They had no reason to learn about 3D printing, but a show where they could walk around and see them in action... they seemed like they had a lot of fun. We even got a bonus high five from Joel and David after the event because we ran into them as we went to the airport :P
The 3dQue booth was awesome... We had a number of conversations both at the event and back at the hotel with their team. They really have a great product and some of what they are planning in the future will be game changing.
As a Belgian, I was fortunate to attend the first RMRRF (mostly thanks to Jim aka Nerdy J) and meet al these people IRL and had an amazing weekend in Colorado ... and knowing German I didn't even need the subtitles to understand Stefan.
Lots of fun. Great meeting and chatting with you and so many others. Was not expecting Stefan to explain stuff in German, thank you Roger_P for translating when RUclips could not.
Thank you, RUclips, for your excellent translation of Stefan's words. I knew German has some very long words, but I didn't know that the word [[foreign]] apparently takes 45 seconds to say.
I attended RMRRF. I enjoyed it. I wish more vendors would have come. Met some nice people. The energy on the floor was amazing. So were those Voron printers. Someday...
For vendors there is a real genuine "cost" to attending anything but the most local of events (think day trip) air fair or travel gas tickets hotel rooms ($150 a night) food postage and maybe even employee pay. its very expensive to attend an event. the vendor turn out for RMRRF was actually quite excellent for a "first" event. considering the turn out I would expect to see more vendors next year for sure. over 3500 critters came through those doors saturday and sunday. it was quite amazing.
You can feel a "squishy ball" in VR. Sure, that's how that technology will be used. I can't imagine any other use case, certainly not one that's driven all networked media delivery and display advancements since the invention of the PC.
I mean I'm sure people will probably buy it for that. People even talked about using the smell-o-vision for that though I don't know of anyone specifically who is using it for that. I just work on the hardware. Up to game developers to make the use cases.
belt printers at least most of them have the gantry at 45' angle. this is how they can do infinite length models. alas this means the nozzle is quite a bit closer to the bed since its also at a 45' angle so you need the extrudy bit to "stick out" a little more so the heater block etc.. does not scrap along the bed. that is what they did with the revo belt nozzles. they made the extrudy bit on the end stick out more to be belt compatible.
It is a really nice format to show a lot of things quickly. Where is part 2? There is more nice stuff there 😅 Let Stefan speak German… cool move. Mal was anderes 😊
Dustin - that's totally fine, man! Some people love this, some people don't. No worries man, I promise. Other booth visits from RMRRF will be coming :)
Es war großartig, Stefan zu sehen, sein Wissen über Waschmaschinen und wie sie zum Weltfrieden beitragen können, war erstaunlich zu sehen
Hahah Ich liebe saubere Kleidung
Ja, als einer seiner langjährigen Patreons bin ich immer noch verwundert wie sehr der Einfluss der Waschmaschinen auf den Weltfrieden im Allgemeinen unterschätzt wird.
Stoßstangen für Kinderwagen aus Gummi. Wusste nicht, dass ich das sagen würde, oder?
Yeah, we failed twice trying to achieve world domination, so we are going for a different approach now.
Grade die Stelle wo er die Wasserweiche erklärt war wunderbar.
After all this time hearing Stefan in English it still sounds weird to me hearing him in my own language. I still watch his English videos just because they’re faster than the German ones. Sorry for all of you depending on crappy YT subtitles.
Came here to say this same thing like.
I've been watching this at 2x. Speed so I had to slow it down to fully realize he was not speaking English. I thought it was just his accent going hard at for a minute 😂
Omg! High flow Revo 🔥. That may be enough to have me standardize Revo on new builds 🙌.
Great job Stefan! Based on the translation below, you did a great 60 second summary of Arc Overhangs!
And thank you Joel for doing these 60 second interviews, it's high-pressure with the short time limit, but everyone who couldn't attend gets to experience a wide variety of booths in a single 15 minute video. Of course it's not the same as being there in-person, but it's the next best thing. RMRRF was amazing and I'm looking forward to the next one!
- Steven
Thank you again Joel and David for those awesome 60 seconds! This was a fantastic event and can’t wait to return next year!
Coincidentally enough like maybe 30 minutes later, I was able to get the light panels back up working 😅
Haha of course! Just leave them on till next year!
Thank you Joel. I was at the RMRRF conference, but you don’t make it a point to speak to everyone or learn what is interesting about each individual or product. Your excellent video gave me so much information that I was not able to glean while there. What would be amazing for a convention is if on the night before, a video such as this was produced and went out to all attendees either by reservation or at the door. A roadmap to everything and everyone. All vendors were interesting and a wealth of Information. Thank you, excellent video!
My table was to the left of Nerys' rockets, and had the dragons he was so worried about. The only table with a Prusa MK4 and a Bambu X1C side by side and took a ton of questions all weekend long about which one was my favorite, when did I use one over the other and more. I also lost count of how many high-fives I got to give Joel over the weekend. :)
And I bothered Ian the whole time :P Lots of fun with Nerys nextdoor and great meeting and chatting with people. From the kids who wanted the little prints of dragons and Minecraft Creepers, to the adults who loved Ian's giant Spider Gwen and larger dragon prints, to people who had no idea about 3D printing and just heard about the show and wanted to check it out. My personal favorites were listening in on the Rack Robotics team (makers of the Powercore EDM machine) talking about the project, the challenges, and how they're doing... and having a in-depth discussion with a couple in their 80s, one of who used to be a chemist, explaining the different materials and additives to get different print properties. They had no reason to learn about 3D printing, but a show where they could walk around and see them in action... they seemed like they had a lot of fun.
We even got a bonus high five from Joel and David after the event because we ran into them as we went to the airport :P
Joel, this was so fun! Who knew 60 seconds was so long. Thanks for having us!
Thank YOU for giving it a shot!
I always look forward to these! Thanks a bunch, Joel and David!! See you at MRRF? :)
Hope so!
Thank you so much for letting me share the Gauntl33t and Cilia 😃
Dude love the way you did this! Learned a lot! Thank you for doing what you do!
Joel this was a really fucking cool thing to do man.
Big ups to you for doing this, Fantastic!
The 3dQue booth was awesome... We had a number of conversations both at the event and back at the hotel with their team. They really have a great product and some of what they are planning in the future will be game changing.
Thanks, Joel, great video - und es ist immer wieder schön, deutsche Stimmen zu hören. 😉😉
Great Video Thank you to all that did the 60 seconds I will try to check out all the things
As a Belgian, I was fortunate to attend the first RMRRF (mostly thanks to Jim aka Nerdy J) and meet al these people IRL and had an amazing weekend in Colorado ... and knowing German I didn't even need the subtitles to understand Stefan.
Love these! Such amazing personalities in the 3D printing community!
What a great idea for a video, and well executed too.
Lots of fun. Great meeting and chatting with you and so many others. Was not expecting Stefan to explain stuff in German, thank you Roger_P for translating when RUclips could not.
Thank you, RUclips, for your excellent translation of Stefan's words. I knew German has some very long words, but I didn't know that the word [[foreign]] apparently takes 45 seconds to say.
I am so happy E3D’s stuff actually showed up this time! 😂
Thumb up for Chris!!
Loved that Stefan got to do his in German.
Impressed how much of that I was able to parse.
Love the 60 sec. stuff!
Peter reminds me of those old-school dudes that were hacking phones back in the 70s.
this is channel is amazing!
I was there Saturday afternoon but did not see any youtubers that I know. I recognize. But glad Sefan made the trip.
this was a really nice video for people who cant be there thank you!!!!
Cheers for the RMRRF speed run, and for signing my V1E MP3DP v4 printer!
Y'all should put links to each of these guy in their time stamps
Oh crud, thought I did that last night - forgot! Just added them all!
@@3DPrintingNerd sweet. Thanks!
I feel cheated. Expected a 60 seconds video.
CookieCad filaments look like everythingi dreamt of trying with a filament extruder, i wish I had one to make crazy filament :D
Clever format.
Always look forward to this
This is getting me hyped for Rapid next week. I hear Impossible Objects will have quite the booth ;)
Im amazed at the things I didn’t see when I was there, but I saw in this video. Crazy
Sooooo cool that's awesome, Joel. Good on you!
Great video! I learned about new filament vendors and 3D printers.
I attended RMRRF. I enjoyed it. I wish more vendors would have come. Met some nice people. The energy on the floor was amazing. So were those Voron printers. Someday...
For vendors there is a real genuine "cost" to attending anything but the most local of events (think day trip) air fair or travel gas tickets hotel rooms ($150 a night) food postage and maybe even employee pay. its very expensive to attend an event. the vendor turn out for RMRRF was actually quite excellent for a "first" event. considering the turn out I would expect to see more vendors next year for sure.
over 3500 critters came through those doors saturday and sunday. it was quite amazing.
OMG VORON BELT KIT
Ich mag den deutschen Typen mit dem Wuschelkopf. 😅
As a German I approve of CNC Kitchens part.
Joel! We neeeed more on that belt voron!
Working on it, PROMISE.
that a great concept
Would've loved to have been able to understand Stefan's speech.
This guy is a legend.
You can feel a "squishy ball" in VR. Sure, that's how that technology will be used. I can't imagine any other use case, certainly not one that's driven all networked media delivery and display advancements since the invention of the PC.
I mean I'm sure people will probably buy it for that. People even talked about using the smell-o-vision for that though I don't know of anyone specifically who is using it for that. I just work on the hardware. Up to game developers to make the use cases.
Good concept!😊
I got excited when I saw Stefan but I didn't understand anything lol
I know what Stefan was talking about but the captions just say “Foreign”… lmao 😂
This was great!
Of course Stefan goes full German on us!
Thx buddy respect ☺️
Stefan aka cnc kitchen❤
Thanks
OH neat! I was at this. 😀
Retromaker is awesome!
SO AWESOME
Can somebody translate Stephen, please. The German is adorable, but incomprehensible to us mere 'mericans.
It's so odd to me hearing Stefan talking in German, I'm so used to him talking in English.
Pretty good, but could I get 60 hours instead? ❤
CNC kitchen!!! ❤️
A Revo "what" nozzle? Revo Belt? Bullet?
belt printers at least most of them have the gantry at 45' angle. this is how they can do infinite length models.
alas this means the nozzle is quite a bit closer to the bed since its also at a 45' angle so you need the extrudy bit to "stick out" a little more so the heater block etc.. does not scrap along the bed. that is what they did with the revo belt nozzles. they made the extrudy bit on the end stick out more to be belt compatible.
@@nerys71 Thank you for that great reply. Until today, I had never heard of a belt nozzle, much less understood why you would want/need one.
Link to voronkits not working??
15 minutes of Joel yelling at people. Also, 11:00, Wuxn is based in the U.S.? I swear I thought they were a Chinese company. Weird.
It is a really nice format to show a lot of things quickly.
Where is part 2? There is more nice stuff there 😅
Let Stefan speak German… cool move.
Mal was anderes 😊
That guy making R2D2 merch is gonna get sued...
ffs ....volume control please !
Zum gluck verstehe ich etwas deutsch
Dude after the first guy lost interest in the rest. Please do a more in-depth interview with peter
There is an LTT video on the smell-o-vision stuff from end of 2020🙂
I love you brother but the 60 second interview is not my favorite.
Dustin - that's totally fine, man! Some people love this, some people don't. No worries man, I promise. Other booth visits from RMRRF will be coming :)
It is sad an disgusting that people are working so hard on virtual things. GET OUTSIDE AND SMELL THE ACTUAL FOREST!!!!