Well done. It looks like the glass/plastic could do with a good polishing. There are videos on here that show you how but make sure you put U.V. protection on them after if you do it. x
@@HylianOverlord that’s because it’s the headlight housing looks oxidize, and give the beam pattern bad. Once it replace the headlights for new oem replacement, it will give a much better results. The led bulbs from auxito are great quality brands and they make really well made led bulbs. We have them in our 2017 Toyota sienna with auxito M3 in a 9005 high beams. It’s a great high beam pattern.
Bonjour Saige & Dad ;), Nice tuto video. As others say, in addition lenses are needing a good polishing to restore Pascal's eagle eyes .. ou plutôt gecko eyes!🤭Thoroughly wash the lenses then try using common toothpaste on polishing cotton, using circular motions. A good deal of elbow grease is needed to achieve good finish. Keep up the good work! 😉
Nice Video! If you can afford to try this also, it cost me $250 at a local window tint shop to have my headlights restored, nice job on the high beams!
Well one thing. It’s a terrible beam pattern. Because her headlights are oxidized. With a new pairs of headlights that are crystal clear, that be a lot better beam pattern. And also who cares if it’s illegal or not. The point is to see better much farther down the road without blinding others. U will not get blind, with the right type of led.
@@HylianOverlord lol that’s because of the headlights are oxidized, resulting a bad beam pattern ya wingnut. These are correct type of led because it has the characteristics of it. We’re running lasfit led and auxito led and gives the best beam pattern, and mimic the same beam pattern as the original halogen projector H11 headlights. All u gotta do is do some lots of research to find the right type of led. Even if it’s illegal, that’s ok. As long as we’re not hurting anyone.
Just realized I didn’t include the link or code on the screen but they’re in the description!
Well done. It looks like the glass/plastic could do with a good polishing. There are videos on here that show you how but make sure you put U.V. protection on them after if you do it. x
Perfect!I definitely need these bright bulbs.
Great video Saige. I will be changing the bulbs in my Spitfire when I finish restoring the bodywork! Cheers, Steve
rip oncoming traffic
She's only put them in the high-beams.
Lol only when I u get the wrong type of led. These u will not blind others
They are the wrong type of LED that is why they have a bad beam pattern.@@toyotabrony
@@HylianOverlord that’s because it’s the headlight housing looks oxidize, and give the beam pattern bad.
Once it replace the headlights for new oem replacement, it will give a much better results. The led bulbs from auxito are great quality brands and they make really well made led bulbs.
We have them in our 2017 Toyota sienna with auxito M3 in a 9005 high beams. It’s a great high beam pattern.
I think you need to start by polishing the cloudy plastic to make them clear
Nice Video! I’m going to look them up! 13:57 Polish the Lenses and they will be brighter on the low beams!
Bonjour Saige & Dad ;), Nice tuto video. As others say, in addition lenses are needing a good polishing to restore Pascal's eagle eyes .. ou plutôt gecko eyes!🤭Thoroughly wash the lenses then try using common toothpaste on polishing cotton, using circular motions. A good deal of elbow grease is needed to achieve good finish.
Keep up the good work! 😉
Nice Video! If you can afford to try this also, it cost me $250 at a local window tint shop to have my headlights restored, nice job on the high beams!
Forget polish the headlights.
Get ur new oem headlights replacement. It’s a lot better for pure crystal clean lens, vs. restore
Next time polish those yellowed lamps. It will give better effect. 😏✌
Darlin', you gotta polish the lenses to allow the photons a place to go!
You should definitely need to clear those lenses.
now polish the lenses.
What a terrible beam pattern also illegal.
Well one thing. It’s a terrible beam pattern.
Because her headlights are oxidized. With a new pairs of headlights that are crystal clear, that be a lot better beam pattern.
And also who cares if it’s illegal or not.
The point is to see better much farther down the road without blinding others. U will not get blind, with the right type of led.
@@toyotabrony They have a terrible beam pattern because they are not DOT-approved to have the correct filament placement, which makes them illegal.
@@HylianOverlord lol that’s because of the headlights are oxidized, resulting a bad beam pattern ya wingnut.
These are correct type of led because it has the characteristics of it.
We’re running lasfit led and auxito led and gives the best beam pattern, and mimic the same beam pattern as the original halogen projector H11 headlights.
All u gotta do is do some lots of research to find the right type of led.
Even if it’s illegal, that’s ok. As long as we’re not hurting anyone.
@@HylianOverlordYes, it says “Off Road”, but what the hell… who cares about anyone else on the road right ?