OMG you are a LIVE SAVER !! I need to send you a bag of Life Savers. I was just sitting outside my car panicking then I got in and couldn’t start it! You helped me 2x!! THANK YOU!!
Thank you Miranda, this happened on my DS3 Crossback spare key. Dealership wanted to charge for diagnostic £150+vat . Followed your instructions and car paired up with key. Very happy! You saved me money and a lot of time Thank you
Omg this saved me! You were the only person that mentioned the anti theft. And that was my problem. My key fob said not detected and wouldn’t start with the fob to start button backup. But I had no idea about the security anti theft lock system. It started right up once I unlocked my car with my fob. So thank you so much!!!
Wow. My Malibu 2018 just did this exact thing, the fob would unlock lock. Went to RUclips and you’re the first video that popped up. Now I can leave for work…thank you!!!!!
Thank you Miranda your video was the 2nd video I watched and it was perfect, worked immediately. The 1st video (male Commentator) wanted me to go under the hood and disconnect the battery. Really!! Thank you again
Oh my goodness this was a life saver. It 1:26pm and I’ve been stuck in advanced auto parts parking lots with the “key not detected error. Could start the car, unlock the doors nothing worked and this simple thing saved my life. My kids were in the car and we are in the coldest weekend in the northeast. It’s was close to 30 struggling until I stumbled across this video. Than you so much. God bless you!!
My issue is I can start by pressing the start button like you show, but shouldn’t have to. Truck is susposed to detect keyfob. Changed keyfob batteries too.
This totally saved me today! Thank you Miranda! You rock! 💪🚙 Any advice when you’ve replaced the battery a couple times with different new batteries and you’re still getting the “Key fob not detected” message?
I had to remove the physical key from the fot in order to open a door. The moment I opened my door, the alarm was initiated. Nothing worked to stop it. I tried to avoid disconnecting both batteries, but after 15 minutes long laud siren I gave up and organized 10mm wrench. My luck the alarm stopped. I guess there was circa 15 minutes time for the alarm. Do you know the way to disarm it, because neither of my 2 fobs did the job?
I replaced battery in key fob and it still won’t start and still says key fob not detected. And when I tried to start the wiper turned on but not the car. Any suggestion or clues
I figured your comment wouldn't have an answer. These people only tell you how to turn the car on when the battery is dead or low, but they won't tell you the exact title of their video, which is the problem of no key fob detected. Did you find the answer? I'm having the same problem.
@@montyhades I'm having the same issue, swapped my batteries, still no key detected, only works when the fob is in the pocket, no buttons work on the fob either, got 3 remotes programmed already
My wife’s 2019 Cherokee just had this same problem … she had to get out of the car lick it then unlock it with the remote then use the key fob to start it … thanks
LOL.. Second video that says to push the button with your key fob,... its actually just bring the fob within an inch or two to the button and then press the brake and then the button... no need to press with the tip of the fob. That will work, but not necessary.
Doesn’t worked for me … I think my batteries are fine but somehow it still shows key fob not detected.. I tried your trick but was unable to start the car.. I can lock and unlock the car but can’t start it as it shows the same message again and again … can you still guide me?
My renegade key fob has a new name brand battery now! ( never use generic batteries!)... Only issue I have now is the automatic rear wiper: does not turn off when it's not raining, so I just leave it off.
@@ClawBoss turns out my new battery didn't last very long! (A month) Now I use name brand batteries, Only one LED for the reverse light (never got around switching back) but had it long before the issue.
also i found if you have your cell phone in the same pocket as your key fob, it wont work either. i had this happen, now i make sure they are in separate pockets
What happens when this does not work ? My key just worked normally less than an hour again and now nothing Works key not detected. I went home for my other fob and that fob not working either.
The only problem with using the key to get in is the horn alarm goes off and if this trick doesn’t work, put your ear plugs in while waiting for the tow truck.
My 2020 Ram 3500, spare key fob is dead, I replaced the battery in it 3x, still nothing, wont unlock doors etc. Suggestions? My primary fob works normal. Does these get DE-programmed from not using?
I'd try taking the tip of the key fob and pressing to the start button as well. It should re-sync. If it still doesn't work, it may be defective and you should probably see a Chrysler service dept.
I replaced my key battery still said key not detected. Went to store in other vehicle comeback and now there is no power at all to the vehicle. Put jumper cables on it and still no power. Any ideas
OMG you are a LIVE SAVER !! I need to send you a bag of Life Savers. I was just sitting outside my car panicking then I got in and couldn’t start it! You helped me 2x!! THANK YOU!!
Thank you Miranda, this happened on my DS3 Crossback spare key.
Dealership wanted to charge for diagnostic £150+vat .
Followed your instructions and car paired up with key.
Very happy!
You saved me money and a lot of time
Thank you
Happy to help!
Omg this saved me! You were the only person that mentioned the anti theft. And that was my problem. My key fob said not detected and wouldn’t start with the fob to start button backup. But I had no idea about the security anti theft lock system. It started right up once I unlocked my car with my fob. So thank you so much!!!
Happy to help!
Wow. My Malibu 2018 just did this exact thing, the fob would unlock lock. Went to RUclips and you’re the first video that popped up. Now I can leave for work…thank you!!!!!
Don’t understand why everybody making a video feels the need for background music 😳😳😳
Thank you Miranda your video was the 2nd video I watched and it was perfect, worked immediately. The 1st video (male Commentator) wanted me to go under the hood and disconnect the battery. Really!! Thank you again
I never comment on videos but you saved my week, my pocket.
Good on a Grand Cherokee Laredo 2014.
Thanks
So glad to hear that! You're welcome! :)
You just saved my vacation with this! Thank you!!
It works on my chrysler 200 THANK YOU
Thank you , you really just helped me out more than you know ✌️❤️🙏
Thank you! I red a bunch of forums etc none of them helped... your trick of using the fob pushing on the start button worked!!!
Happy to hear that! No one likes feeling stuck. :)
Oh my goodness this was a life saver. It 1:26pm and I’ve been stuck in advanced auto parts parking lots with the “key not detected error. Could start the car, unlock the doors nothing worked and this simple thing saved my life. My kids were in the car and we are in the coldest weekend in the northeast. It’s was close to 30 struggling until I stumbled across this video. Than you so much. God bless you!!
My issue is I can start by pressing the start button like you show, but shouldn’t have to. Truck is susposed to detect keyfob. Changed keyfob batteries too.
Wow you just saved me! Car started!!🎉🎉 😃😃😃Canceling my roadside assistance. Thank you so much! 😺
It works!! I got the not detected code and I followed the video!! Thanks 😌
Thanks good video. This just happened to me on my JL. I got it started the same way you mentioned.
This totally saved me today! Thank you Miranda! You rock! 💪🚙 Any advice when you’ve replaced the battery a couple times with different new batteries and you’re still getting the “Key fob not detected” message?
This is the best how to video I ever watched on RUclips. So quick and simple. Thank you very much. GOD bless
Thanks for the kind comments! GOD bless you too!
Thanks for the key fob not detected info. I will try it on my 2014 Dodge Challenger tomorrow
Thanks I put a new battery on the key pod can you tell me why that had happened is there a problem in the system or what
I had to remove the physical key from the fot in order to open a door. The moment I opened my door, the alarm was initiated. Nothing worked to stop it. I tried to avoid disconnecting both batteries, but after 15 minutes long laud siren I gave up and organized 10mm wrench. My luck the alarm stopped. I guess there was circa 15 minutes time for the alarm. Do you know the way to disarm it, because neither of my 2 fobs did the job?
Important information to know. Thanks
Good video!! I was freaking out for a bit!!
Thanks Lady!!!!
Happy to help! :)
I replaced battery in key fob and it still won’t start and still says key fob not detected. And when I tried to start the wiper turned on but not the car. Any suggestion or clues
Did u remember what u had to do mine is doing exactly same thing
I figured your comment wouldn't have an answer. These people only tell you how to turn the car on when the battery is dead or low, but they won't tell you the exact title of their video, which is the problem of no key fob detected. Did you find the answer? I'm having the same problem.
Me too
@@montyhades I'm having the same issue, swapped my batteries, still no key detected, only works when the fob is in the pocket, no buttons work on the fob either, got 3 remotes programmed already
My wife’s 2019 Cherokee just had this same problem … she had to get out of the car lick it then unlock it with the remote then use the key fob to start it … thanks
Yeah I know but why does this keep happening on a truck that’s a 2022? Also why can’t you disable the 3 horn beep when fob has left running vehicle
I love you ❤️
Thanks a lot🙏 You saved my day❤️
It worked!
Thank you so much
Thanks so much I got stranded for like 15 mins at a corner store
LOL.. Second video that says to push the button with your key fob,... its actually just bring the fob within an inch or two to the button and then press the brake and then the button... no need to press with the tip of the fob. That will work, but not necessary.
Hi. Thats not a fix. Thats just work around. I changed the battery but still getting same error
It works in a pinch if you're stuck somewhere and that was the point of the video! Feel free to make your own.
Thank you lady 🤦♀️
What if you can’t get inside the car and the key won’t even work or the key fob
Miranda, Thank you!!!
Doesn’t worked for me … I think my batteries are fine but somehow it still shows key fob not detected.. I tried your trick but was unable to start the car.. I can lock and unlock the car but can’t start it as it shows the same message again and again … can you still guide me?
Hey same thing happening to me, did you find any solution?
Has anyone found about our issue
How do you fix that problem I have all new batteries and it still does this
Thank you for the video - I replaced my battery but how do I reprogram or reset it. Thanks!
Do you reprogram your key control hopefully you asnwer my questions thank you
Thank you for this!!
you're welcome
Omg This helped me soo much thank you
Thank you so much.
Change your battery in the fob every six months. That is the primary cause of problems w/ this device. 3.3 volts works. 3.02 doesn't.
Oh wow this really work thank u
My renegade key fob has a new name brand battery now! ( never use generic batteries!)... Only issue I have now is the automatic rear wiper: does not turn off when it's not raining, so I just leave it off.
Do you have any aftermarket LED bulbs installed? My truck does it but I was told it’s because of the LEDs
@@ClawBoss turns out my new battery didn't last very long! (A month) Now I use name brand batteries, Only one LED for the reverse light (never got around switching back) but had it long before the issue.
Thank you 😭😭
also i found if you have your cell phone in the same pocket as your key fob, it wont work either. i had this happen, now i make sure they are in separate pockets
What happens when this does not work ? My key just worked normally less than an hour again and now nothing Works key not detected. I went home for my other fob and that fob not working either.
This didn't fix anything. Simply how to start with fob. How do you fix a fob not detected error when the remote has a good battery?
The only problem with using the key to get in is the horn alarm goes off and if this trick doesn’t work, put your ear plugs in while waiting for the tow truck.
That s the answer no one came up
Thank you so much
So helpful
i am able to run car in that way, but why start/stop buttins are no reacting? disprogrammed mayby
My 2020 Ram 3500, spare key fob is dead, I replaced the battery in it 3x, still nothing, wont unlock doors etc. Suggestions? My primary fob works normal. Does these get DE-programmed from not using?
I'd try taking the tip of the key fob and pressing to the start button as well. It should re-sync. If it still doesn't work, it may be defective and you should probably see a Chrysler service dept.
This isn’t a fix, it’s a work around.
My dad says thank you
Wenn ich die Batterie aus dem KeyFob nehme, funktioniert der Notstart nichtntworten
I know this when I was 11 and now I'm 27
what if your key fob has a new battery and the same problem pops up almost every time?
I've the same issue but don't think they on to this question
It's a Chrysler. Expect this kind of nonsense.
Same issue here. It's annoying and I wish someone would comment on a fix.
Having the same issue in a 2018 ram 1500.
just to follow up still no fix.
How to turn off alarm with low battery?
You look so much like my niece it's scary.
Jeep Lemon 🤭
EXCELLENT
Step out of the car. Press the unlock button for 5x. On the 5th time, press and hold for 5 seconds.
Didn’t work lml
be nice to hear you without the overloud music in the background
My key only starts my van
Doesn't unlock/lock doors or trunk
Doesn't work
I tried doing it and it would not work at all what do I do
Excellent info but this is not fix
Misleading title. This doesn't fix the problem, this bypasses one possible cause
Seems to have helped quite a few people on this thread so far. Perhaps you should make your own video and title it however you want.
Nope ... that trick didn't work. Any other ideas?
This is just a workaround, not a fix.😐
Hello, I've tried this already i even change my battery and it still says key fob not detected, what should i do now
Does the key fob lock and unlock your doors? If not the battery might be in it the wrong way. Open the key fob, flip the battery and try again.
@@mirandadrives333 it does unlock and lock the car, thats what's so crazy to me.
Just changed my battery in my fob, still can’t open my doors and I’m afraid to us to the valet key because the alarm will go off...what do I do??
@@derekborgen334 I ended up taking my to the dealer to get fix. This method didnt work for me
@@derekborgen334 did your car start with this method?
doesn't work. i'll never buy jeep again.
That’s not a fix that bypasses it that’s not fixs
Also, your very beautiful + the intelligence on the matter🙃
This is not a fix.
abooot cute
You are so freaking cute 😍😘😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍
I replaced my key battery still said key not detected. Went to store in other vehicle comeback and now there is no power at all to the vehicle. Put jumper cables on it and still no power. Any ideas
any update
Thank you so much
You're most welcome