I am using the twotrees TS2 laser engraver. He can adjust the z-hight via parameter in lightburn and lasergrbl. It would be great when your software would develop this funktion too.
This is the controller for the ttc450, Learning about it now for when the inevitable occurs… Also, seems the open builds offline controller is compatible (just gotta locate the RX/tx/gnd/5v pins..USB?) 🤙🏼
question? how we can stop cooling fan after stopping the engraving process ( maybe after 1 min). look at the other brands? their cooling fans are getting stopped after a min. how we do it ?
engraves in grayscale and at a resolution of 0.1 slows down to 2000mm / min (I have 4000 set) there is no difference between a nano 8 bit which has the same speed. I have a third-party nano 32bit and it can handle 4000 with no problem. I was tempted by the price (3 times lower)and speed 8000 but it's not the same .yes it works fine but it works slow (engraves)
Hello! as soon as possible, take a doubt: mks dlc32 would I organize the files in the SD CARD by folders? The doubt is because I have one and when I go by folder it doesn't recognize it in the system, only if I put the files outside the folders. Could you answer this question?
Hola el producto se ve muy genial. Tengo unas consultas: 1. En la alimentación para el laser (12V) que corriente máxima puede proporcionar? 2. Para el doble eje Y, se puede usar dos motores, cada uno de 1,5 amperios? pues como solo tiene un driver para el eje Y, no se si podrá proporcionar la potencia necesaria (los drivers que usaré son TMC 2209). Espero su respuesta, muchas gracias de antemano.
Das Bord scheint mir genau das richtige für mich zu sein, ich hätte gerne ein Video in Deutscher Sprache gehabt, gibt es leider nicht. Auch finde ich nirgends eine Angabe, ob bei dem Board noch das ältere 7“ TFT funktioniert. 👏🏻👏🏻👏🏻👍🏻😎
I have bought the combo: DLC32 + TS35-R, it has not arrived yet. While doing it, I have been looking for information but of TS35-R I have not found anything. Could you tell me where to look? Thanks
@@makerbaseteam4217 Would you have the link exactly?, and what setting should I change to switch to core xy system? I really liked your Motherboards and intend to buy more of them, but I would love to use the core xy system
@Makerbase Team am currently waiting for my DLC32-TFT35 shipment to arrive. Will be using it for CNC 3018 thus will be uploading the CNC firmware. Can I still use it for laser engraving? I have a laser module and currently been swapping between motor and laser as as needed with my current motherboard.
@@makerbaseteam4217 my board already arrived. updated the firmware to cnc normal (DLC32_CNC_V1.2.001_Normal_8M_H35_0911). Noticed that the z limit switch wont function. And I can no longer do homing. When I tried to use the setup wizard of UGS it seems like that the z limit is disabled. Is this normal or was I sent a defective board.
@@makerbaseteam4217 tested attaching a 200W motor yesterday at the 24V motor terminal. Whenever I turn on the motor through UGS or through the tft, the dlc board turns off and reset. When turned on without the motor, the red LED near the mosfet lights up with a measurable 24v at the motor terminal and 4.8v at the ttl terminal. Is the product designed for a mosfet switch or is there a defect on my board? Sorry to ask these questions here, there are still no forums about this product that I can search online on cnc use.
Hello, it is already on sale. This is the purchase link: www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
Hello, it is already on sale, this is the purchase link www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
Hello, the new firmware can use the configuration file to configure the wifi name and password. The new firmware is still under test and will be released soon. Please pay attention
What a great product! Thank you makerbase! 😊👍🏼
I am using the twotrees TS2 laser engraver. He can adjust the z-hight via parameter in lightburn and lasergrbl. It would be great when your software would develop this funktion too.
This is the controller for the ttc450, Learning about it now for when the inevitable occurs…
Also, seems the open builds offline controller is compatible (just gotta locate the RX/tx/gnd/5v pins..USB?)
🤙🏼
question? how we can stop cooling fan after stopping the engraving process ( maybe after 1 min). look at the other brands? their cooling fans are getting stopped after a min. how we do it ?
engraves in grayscale and at a resolution of 0.1 slows down to 2000mm / min (I have 4000 set) there is no difference between a nano 8 bit which has the same speed. I have a third-party nano 32bit and it can handle 4000 with no problem. I was tempted by the price (3 times lower)and speed 8000 but it's not the same .yes it works fine but it works slow (engraves)
Have you modified the acceleration? As the default acceleration is only 500, you can improve it for high speed engraving, for example, 2000.
@@menli7686 I'm talking about a resolution of 0.1 because 0.2 is good
@@forestgamp4892 Sorry, I cannot understand a resolution of 0.1 and 0.2 mean. What software has this function?
@@menli7686 0.1 is ten lines per millimeter and it gets lost, it can't cope so fast only 2000 speed
which type of closed loop motor from you I can use with this board for laser? There are a lots on aliexpress shop. Tnx
The Board has Potential, but the Firmware from MKS and there support for this Board make it a don't buy product. Very sad MKS!!!
Hello! as soon as possible, take a doubt: mks dlc32 would I organize the files in the SD CARD by folders?
The doubt is because I have one and when I go by folder it doesn't recognize it in the system, only if I put the files outside the folders.
Could you answer this question?
Hola el producto se ve muy genial. Tengo unas consultas:
1. En la alimentación para el laser (12V) que corriente máxima puede proporcionar?
2. Para el doble eje Y, se puede usar dos motores, cada uno de 1,5 amperios? pues como solo tiene un driver para el eje Y, no se si podrá proporcionar la potencia necesaria (los drivers que usaré son TMC 2209). Espero su respuesta, muchas gracias de antemano.
Hello. Are there different models of DLC32 (v1.0? v2.0?) and does it support sensorless homing using TMC2209, please?
Hola como puedo conectar y activar un micro servo (Tower Pro), a la placa MKS DLC 32 V2.1, gracias
Boa noite! Tenho uma two trees e substitui a placa por uma dlc 32. Nao estou conseguindo instalar
Is there a Emi protection for Limit switches, like optocouplers? :)
And can you connect 2 tmc2160 drivers to Y axis connector? :)
no new version ? .. MKS DLC32 with servo pin control .. like MKS DLC ?
Das Bord scheint mir genau das richtige für mich zu sein, ich hätte gerne ein Video in Deutscher Sprache gehabt, gibt es leider nicht. Auch finde ich nirgends eine Angabe, ob bei dem Board noch das ältere 7“ TFT funktioniert. 👏🏻👏🏻👏🏻👍🏻😎
TFT7.0 cannot work on this motherboard
como faço para personalizar os limites dos eixos e os icones da tela?
I have a 3018 CNC. I don't have the laser module. Can I use it for milling?
The firmware for 3018 will be released on next month.
@@menli7686 ok, thank you! I would love to make a review video of this product :)
@@mertcapkin7263 Thank you.
@@menli7686 is it possible to send it to me for review?
I have bought the combo: DLC32 + TS35-R, it has not arrived yet. While doing it, I have been looking for information but of TS35-R I have not found anything. Could you tell me where to look? Thanks
The message of TS35 is that it is only different in size from TS35-R
does this work with co2 laser?
How to make the Z axis become the second Y axis for a 1500 * 1500mm laser machine with two Nema 17 motors on the Y axis?
On DLC32, there are two interfaces for Y-axis , which share the same driver. Can it meet your needs?
@@menli7686 Two motors consume 4A, and one driver produces only 2A.
Is this firmware compatible with core xy system?
would help even more to reach higher speeds
Support corexy machines, there are corexy model firmware, which can be found on our github
@@makerbaseteam4217 Would you have the link exactly?, and what setting should I change to switch to core xy system?
I really liked your Motherboards and intend to buy more of them, but I would love to use the core xy system
Hello, you can update the firmware for CoreXY here: github.com/makerbase-mks/MKS-DLC32/tree/main/firmware/Laser/CoreXY
BOA TARDE, TERIA UM FIRMWARE PARA FAZER OUTRA APLICAÇÃO SE NÃO LASER? UM CORTE A QUENTE POR EXEMPLO FIO AQUECIDO.
Hello, it can also be used as CNC
Does mks support 128x64 lcd display?
Did you make firmware for CNC mill? If yes, please give me link to it. I`m waiting for firmware to buy this motherboard
There is cnc firmware in our github
@@makerbaseteam4217 thank you
Hi I need to know max.amount of watt of laser power I can use
Hello, it is recommended to use less than 40W
@Makerbase Team am currently waiting for my DLC32-TFT35 shipment to arrive. Will be using it for CNC 3018 thus will be uploading the CNC firmware. Can I still use it for laser engraving? I have a laser module and currently been swapping between motor and laser as as needed with my current motherboard.
Support laser engraving and CNC
@@makerbaseteam4217 my board already arrived. updated the firmware to cnc normal (DLC32_CNC_V1.2.001_Normal_8M_H35_0911). Noticed that the z limit switch wont function. And I can no longer do homing. When I tried to use the setup wizard of UGS it seems like that the z limit is disabled. Is this normal or was I sent a defective board.
@@mariomanus3176 Normal, there is no Z limit common function in the firmware
@@makerbaseteam4217 tested attaching a 200W motor yesterday at the 24V motor terminal. Whenever I turn on the motor through UGS or through the tft, the dlc board turns off and reset. When turned on without the motor, the red LED near the mosfet lights up with a measurable 24v at the motor terminal and 4.8v at the ttl terminal. Is the product designed for a mosfet switch or is there a defect on my board? Sorry to ask these questions here, there are still no forums about this product that I can search online on cnc use.
@@mariomanus3176200w motor? Is mos output all the time after power on now?
Will the source code be accessible? I just found the bin files on git repo
Seems not as two years later Makerbase have stopped supporting this and their other products.
When will it be available for sale? What is the price?
Hello, it is already on sale. This is the purchase link: www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
I would love to use this board for a CNC Mill. Is this possible?
Hello, it can be used for CNC, and the firmware of CNC will be released soon
@@makerbaseteam4217 Thank you Makerbase for this awesome work! 👍🏼
Hi, what spindle motor power and voltage the DC output can drive, please?
@@peerxonthefire9768 At theory, it can drive 24V/15A.
@@menli7686 thank you.
когда появится в продаже на алиэкспресс?
Hello, it is already on sale, this is the purchase link
www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
Is it connect with 500 watt spindle
How can setup wifi without screen?
Hello, the new firmware can use the configuration file to configure the wifi name and password. The new firmware is still under test and will be released soon. Please pay attention
@@makerbaseteam4217 Thank you. Tmc2209 sensorless home can work on it?
@@ahmetbozac1861 Don't have this function yet